It's possible an SSA value depends on a register; in this case, chasing
the source would result in a crash as the chase helper in NIR asserts
is_ssa. Instead we should check a priori that all the argments are in
fact SSA, bailing otherwise.
In the piglit shader exhibiting this bug (by looping over the index),
bailing on the ishl instruction is -necessary-. This is not merely us
being cowardly to avoid seeing through the registers; indeed, if we
wrote away the ishl instruction, the shift itself would have to be
stored in a load/store register (r26/r27) which would preclude reading
it in the loop, creating a register allocation failure later in the
compile. So this is the correct solution due to the restricted
semantics.
Closes#3286
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reported-by: Icecream95 <ixn@keemail.me>
Fixes: f5401cb886 ("pan/midgard: Add address analysis framework")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6144>
This prevents RA failures the results of reading multiple textures that
require less than 4 channels, as seen in a number of GL 3 WebRender shaders.
Closes: #3342
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reported-by: Icecream95 <ixn@keemail.me>
Tested-by: Icecream95 <ixn@keemail.me>
Cc: mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6144>
This may be required by some applications, even though
not all texture formats will be below 2GB limit.
This change also increases the maximum size of render target,
that was inadvertently lowered some time ago.
Reviewed-by: Krzysztof Raszkowski <krzysztof.raszkowski@intel.com>
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6139>
When the llvm draw engine is used for draw shaders in st_program the driver
may not enable the cap PIPE_CAP_PACKED_UNIFORMS, so uniforms are not
be lowered to UBOs. However, llvm doesn't support nir_load_uniform, so lower
the uniforms to UBO now. The multiplier is set to 16 to be the same like in
the TGSI code path.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5681>
Fixes the following building errors:
clang: error: no such file or directory: 'external/mesa/src/gallium/drivers/freedreno/a2xx/disasm-a2xx.c'
clang: error: no input files
FAILED: out/target/product/x86_64/obj/SHARED_LIBRARIES/gallium_dri_intermediates/LINKED/gallium_dri.so
ld.lld: error: undefined symbol: disasm_a2xx
>>> referenced by ir2_assemble.c:546 (external/mesa/src/gallium/drivers/freedreno/a2xx/ir2_assemble.c:546)
>>> ir2_assemble.o:(assemble) in archive out/target/product/x86_64/obj/STATIC_LIBRARIES/libmesa_pipe_freedreno_intermediates/libmesa_pipe_freedreno.a
clang-9: error: linker command failed with exit code 1 (use -v to see invocation)
Fixes: f39afda1a7 ("freedreno: move a2xx disasm out of gallium")
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6151>
Porting of meson build rules to Android
Fixes: 9623debf48 ("freedreno: Centralize UUID generation into new files freedreno_uuid.c/h")
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6151>
Fixes the following building error:
external/mesa/src/freedreno/ir3/disasm-a3xx.c:33:10: fatal error: 'disasm.h' file not found
#include "disasm.h"
^~~~~~~~~~
1 error generated.
Fixes: f7bd3456d7 ("freedreno: deduplicate a3xx+ disasm")
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6151>
Fixes the following building errors:
FAILED: ninja: 'external/mesa/src/freedreno/registers/a2xx.xml',
needed by 'out/target/product/x86_64/gen/STATIC_LIBRARIES/libfreedreno_registers_intermediates/registers/a2xx.xml.h',
missing and no known rule to make it
...
FAILED: ninja: 'external/mesa/src/freedreno/registers/adreno-pm4-pack.xml.h',
needed by 'out/target/product/x86_64/gen/STATIC_LIBRARIES/libfreedreno_registers_intermediates/registers/adreno-pm4-pack.xml.h',
missing and no known rule to make it
Fixes: b721d336da ("freedreno: slurp in rnndb")
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6151>
If pStrides or Psizes are NULL we should use the values defined by the
pipeline.
v2: fix commit message and fix the code to set explicitly if we are
using dynamic stride/size
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5604>
This is done using 3DSTATE_VF_TOPOLOGY packet that overrides topology
used in subsequent 3DPRIMITIVE commands. For gen7[5] we override the
pipeline topology when emitting draw commands.
v2: fix the way gen7[5] is handled (Lionel)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5604>
Emit 3DSTATE_CLIP during cmd_buffer_flush_state so that we can change
the max viewport count dynamically.
v2: use one common clip state as size is the same for all gens (Lionel)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5604>
Leave default state values as zero so that when we OR them later
it is only the dynamic state value that matters.
v2: code cleanup + skip topology emit in base batch
when topology is dynamic (Lionel)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5604>
This is needed to ensure the function prototypes are declared.
v2: tweak commit message (Jason)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5604>
We were open-coding it, and getting variant parsing wrong for things
like "A4XX-" which don't explicitly include the version being
disassembled. Use the rnn function instead. This makes CP_INDIRECT show
up again. Also propagate const-ness to users.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6140>
It's totally not obvious, but this runs extra error checking and is
necessary for correct variant handling, and variant handling will
silently not work if it's not enabled. Add it asm.c even though it's not
strictly necessary, to prevent anyone from missing this in the future.
Missing this really should be an error.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6140>
We'll need this for afuc, and we're currently also open-coding the same
thing in rnnutils. It seems this function was added to decode pm4 packet
names, but it currently has no users, so make it useful for what it
was intended to do.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6140>
`init_haiku()` is called by `eglInitialize()`, which then calls
`_eglComputeVersion()` (without even anything in between). The latter
sets the EGL version based on the extensions supported, and since Haiku
doesn't support any it will end up overwriting the same `1.4` value.
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6131>
Converted using `s/_EGLDriver/const _EGLDriver/g` and dropped a couple
of irrelevant changes in comments, in the `_EGL_DRIVER_TYPECAST()` macro
and the typedef itself.
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6129>
Previously we parsed a src non-terminal but did nothing with it. Since
the WAIT instruction is kind of weird, in that you have to give it the
same notification subregister for both destination and source, and it
always has an exec size of 1, let's parse a destination instead of a
source. This way, we can parse a writemask rather than a swizzle in
align16 mode, and easily convert the writemask to a swizzle to create
the source register.
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5956>
brw_reg::subnr is in bytes, like the subnr field in the instruction
word, but we disassemble the subregister number in units of the type.
For example g0.3<1>F would have a subnr=12.
These non-terminals produce a brw_reg and feed into other non-terminals
that call brw_reg(), where they are passed the subnr that we set here.
brw_reg()'s subnr parameter is expected to be in terms of the register
type, and it is multiplied by the type size to calculate the subnr in
bytes.
In these non-terminals, we don't know the register type yet, so we
must store the subregister number as it was given to us in the .subnr
field and let the brw_reg() constructor handle the conversion to the
canonical byte-based subnr form when it knows the type.
Before this patch, subregister numbers applied to these registers would
be multiplied with the type size twice.
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5956>
Needs a second argument to be consistent with the real IR and the
hardware instruction.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Fixes: 8a4efe2d73 ("pan/bi: Pack second argument of F32_TO_F16")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6142>
The MinIO server is sometimes complaining about the submitted date being
too off.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6135>
Also document some other registers gleaned from looking at the context
switch save/restore routines and fix CP_SDS_REM_SIZE, and make the names
line up with the CP perfcntr names. Note that the CP reads the draw
stream size in CP_SET_BIN_DATA5 using MEM_READ_ADDR, which is probably
why this was mistaken for the draw stream size address.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6123>
This change adds support for BT709 and BT2020 colorspace to the YUV
lowering pass. The default remains BT601.
This change also fixes minor imprecision in the last digits of the BT601
offsets due to computation from rounded values when the math was
simplified.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6122>
