Tagging a device should occur only once during configure. We do not
have devices that can be changed after they are configured, so there is no
point in having the tagging part in a deferred struct.
Plus, the note saying that we tag with only one of EVDEV_TAG was wrong.
Now that we are chosing when we call each evdev_tag_*, we can also get
rid of the device->seat_caps tests.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When we get the release event within the timeout, we send a press + release
event for the middle button. Rather than using the release event's timestamp
for both, remember and use the button press timestamp.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The keyboard test is a simple one, if we have the first row of alphabetic
keys, we assume it's a full keyboard.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
The touchpad carries enough state around that calling release_all_keys() isn't
enough to properly suspend it. e.g. a button down after tapping won't be
released by trying to release the physical button for it.
We need to clear the state properly, but that's interface-specific so add a
new hook for it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The System76 Galago Ultra Pro is a rebranded Clevo W740SU with changed
firmware strings. To my knowledge, the Clevo W740SU and all its rebrands
possess smooth touchpads.
In the original bug report[1], a Galago Ultra Pro was returned to the
original DMI strings by flashing another firmware. This resulted in the
model identified as MODEL_SYSTEM76_CLEVO.
Since the actual manufacturer of the W740SU is Clevo and the CLEVO hwdb
entry already properly identifies other W740SU rebrands like the Schenker
S413, the model should be renamed to match.
[1]: https://bugs.freedesktop.org/show_bug.cgi?id=90170#c3https://bugs.freedesktop.org/show_bug.cgi?id=90353
Signed-off-by: Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Bonobo, Clevo, Galago and Kudu have clickpads and no markings ->
enable clickfinger by default.
Lemur and Gazelle have physical buttons, no need for extra configuration.
https://bugs.freedesktop.org/show_bug.cgi?id=90170
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This matches the vendor default.
Board IDs pulled from modinfo chromeos_laptop, touchpad names from a bit of
googling around.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Those touchpads presents an actual lower resolution that what is
advertised.
We see some jumps from the cursor due to the big steps in X and Y
when we are receiving data.
For instance, we receive:
E: 13.471932 0003 0000 16366 # EV_ABS / ABS_X 16366
E: 13.471932 0003 0001 9591 # EV_ABS / ABS_Y 9591
E: 13.471932 0000 0000 0000 # ------------ SYN_REPORT (0) ----------
E: 13.479924 0003 0000 16316 # EV_ABS / ABS_X 16316
E: 13.479924 0003 0001 9491 # EV_ABS / ABS_Y 9491
E: 13.479924 0000 0000 0000 # ------------ SYN_REPORT (0) ----------
E: 13.487939 0003 0000 16271 # EV_ABS / ABS_X 16271
E: 13.487939 0003 0001 9403 # EV_ABS / ABS_Y 9403
E: 13.487939 0000 0000 0000 # ------------ SYN_REPORT (0) ----------
-> jumps of ~50 in X in each report, and ~100 for Y.
Apply a factor to minimize those jumps at low speed, and try
keeping the same feeling as regular touchpads at high speed.
It still feels slower but it is usable at least
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Some devices need specific configuration or different defaults.
Push that into udev rules and a hwdb file, that's where detection is the
easiest. The LIBINPUT_MODEL_ prefix is used to determine some type of device
model. Note that this property is a private API and subject to change at
any time without notice.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Similar to libinput_device_pointer_has_button(), this function returns whether
a given device has a specific keycode.
This enables a caller to determine if the device is really a keyboard (check
for KEY_A-KEY_Z) or just a media key device (check for KEY_PLAY or somesuch),
depending on the context required.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
There is quite a wide spread in the delta events generated by trackpoints,
some generate deltas of 1-2 under normal use, while others generate deltas
from 1-20.
It is desirable to normalize trackpoint deltas just like we are normalizing
mouse deltas to 1000 dpi, so as to give different model laptops aprox.
the same trackpoint cursor speed ootb.
Recent versions of udev + hwdb set a POINTINGSTICK_CONST_ACCEL udev property
which can be used to adjust trackpoints which are too slow / too fast
ootb, this commit implements support for that property.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This is just the required framework, it's not hooked up to anything just yet.
Hooking it up comes as separate commit to better detail why/when a device
supports emulation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
No functional changes at this point, this merely splits up any physical
buttons (i.e. that represent buttons that exist on that device) vs. other
buttons that are emulated in some way or another.
This is in preparation for the addition of middle button emulation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Make the helper function accessible from other places (will be needed in an
upcoming patchset). This also now takes a custom resolution as argument
instead of always setting it to 1, and allows overriding a fake resolution
after the fact.
And instead of a hardcoded 1 everywhere, use a define for the resolution.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This way the unaccelerated deltas returned by libinput are correct.
To maintain the current behavior we slow down the input speed by the magic
factor and likewise the accelerated output speed. This produces virtually the
same accelerated deltas as the previous code.
The magic factor is applied to the default denominator for guessing a
resolution based on the touchpad diagonal. We can't really get around this
without having a resolution from the touchpad; meanwhile this produces
virtually the same coordinates before/after.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Make it clear where we're dealing with device coordinates and where we're
dealing with DPI-normalized coordinates.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Ideally we want to specify various thresholds in mm, but not all touchpads
set the hardware resolutions. Rather than conditions to check for resolutions
everywhere, use a macro to give us a normalized value that we use for motion
as well.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The laptops on this series have the physical trackpoint buttons back but
wired them up to the touchpad instead of the trackpoint device and they appear
as BTN_0, BTN_1 and BTN_2 for left, right, middle.
The udev hwdb marks these for us with the TOUCHPAD_HAS_TRACKPOINT_BUTTONS tag
[1]. Use that tag to identify them and re-route the events through the
trackstick device after mangling the event codes to represent the actual
buttons.
[1] http://cgit.freedesktop.org/systemd/systemd/tree/hwdb/70-touchpad.hwdb
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Some devices require more than just flipping around the buttons, such as
tablets.
When it comes to devices like tablets, because the position of the palm rest is
on the right, the entire tablet has to be flipped around in order to be usable
by lefties. As such, this requires that we reverse the coordinates of the
tablets in addition to flipping the buttons on the tablet. As such, renaming
these functions so that they aren't specific to devices where only the buttons
are flipped seems appropriate.
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For a caller to implement/provide kinetic scrolling ("inertial scrolling",
"fling scrolling"), it needs to know how the scrolling motion was implemented,
and what to expect in the future. Add this information to the pointer axis
event.
The three scroll sources we have are:
* wheels: scrolling is in discreet steps, you don't know when it ends, the
wheel will just stop sending events
* fingers: scrolling is continuous coordinate space, we know when it stops and
we can tell the caller
* continuous: scrolling is in continuous coordinate space but we may or may not
know when it stops. if scroll lock is used, the device may never technically
get out of scroll mode even if it doesn't send events at any given moment
Use case: trackpoint/trackball scroll emulation on button press
The stop event is now codified in the API documentation, so callers can use
that for kinetic scrolling. libinput does not implement kinetic scrolling
itself.
Not covered by this patch:
* The wheel event is currently defined as "typical mouse wheel step", this is
different to Qt where the step value is 1/8 of a degree. Some better
definition here may help.
* It is unclear how an absolute device would map into relative motion if the
device itself is not controlling absolute motion.
* For diagonal scrolling, the vertical/horizontal terminator events would come
in separately. The caller would have to deal with that somehow.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Original patch, before the rebase onto today's master:
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Some dispatchers may want to do some cleanup at remove time, rather then at
destroy time.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The libinput device abstracts a number of things but sometimes the underlying
device is important. The udev device provides the necessary handle to access
that underlying device and various sysfs properties that may be necessary.
A function returning the device node would've done the same thing but is more
prone to race conditions than the udev_device.
https://bugs.freedesktop.org/show_bug.cgi?id=85573
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Using a udev_device instead of the various bits separately safes us
re-initializing udev contexts whenever we need to compare the device. And
having the actual udev device makes it a bit easier to ensure that we're not
re-initializing a different device as a current one.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
We're about to add natural scroll support to other devices as well, let's
share the code.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Keep the default behavior of middle button scrolling on trackpoints, this
allows turning off middle button scrolling on trackpoints, as well as turning
on button scrolling on trackballs.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=85535
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
In some cases the compositor will want to know which buttons a device has.
E.g. for scrolling we want the compositor to be able to set a button to change
a relative device (e.g. a trackball) into scroll mode, so that it sends
scroll-axis events instead of pointer motion events.
In order for the compositor to be able to present a sane UI for this, it needs
to know which buttons a device has.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The previous code used delta/event as scroll trigger which roughly translates
to speed, but depends on the sampling rate of the device.
For slow two-finger motion, a user may move the height of the touchpad without
ever triggering scrolling. Change the _initial_ trigger to a cumulative
trigger, i.e. once the user moved past the threshold distance, scrolling
starts regardless of the speed.
Once scrolling is engaged, the original trigger of threshold/event is
required to engange the second scroll direction.
Note that except for really slow movements, it's very easy to engage both
scroll directions on a touchpad. This is intentional, libinput does not have
enough semantic knowledge to know if horizontal scrolling is needed. So we
provide some direction locking but not much, it's up to the
client/toolkit/widget to decide if both scroll directions should be handled.
Add a comment to clarify that in the public doc.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Use the ratelimit helpers for SYN_DROPPED logging. This guarantees that we
will still receive SYN_DROPPED log-messages after multiple days of
runtime, even though there might have been a SYN_DROPPED flood at one
point in time.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Assume "normal" mice are 400DPI, and that all calculations should be
normalized to this before being fed into the filter.
There isn't yet a way to configure a device's DPI.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Log a message when the kernel event queue overflows and events are dropped.
After 10 messages logging stops to avoid flooding the logs if the condition
is persistent.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Two separate flags needed, want_left_handed and left_handed to avoid switching
to left_handed while a button is still down. Since each backend has a
different way of determining whether buttons are down, let them set a function
to do exactly that. Then call that function whenever a button release event is
posted to switch the device to right/left-handed if applicable.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The top soft buttons are intended for use with a trackpoint, and to e.g.
make middle button scrolling work correctly, we must post the events for
these "buttons" through the trackpoint device.
This commit is a preparation patch for this, it adds a link to the
trackpoint to the touchpad, but does not yet do anything with it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We have the ability for a device to form a link to another device through the
device_added / device_removed callbacks. A device having such a link to
another device may also want to know when that other device is disabled /
enabled (suspended / resumed). So add a notification mechanism for this too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Most trackpoint users want to be able to scroll using the trackpoint with
the middle button pressed, add support for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
So that it can be used for middle button trackpoint scrolling too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For conditional touchpad disabling we need two pieces of knowledge: is the
device an internal touchpad and is another device an external mouse-like
device. For that use-case it's enough to tag any device that's on USB and
Bluetooth with pointer capabilities as external mouse. A more complex can be
done when needed.
The tag function is part of the dispatch interface (to save on udev code) and
called before the caller is notified about the new device, i.e. the device is
fully configured by the time it needs to be tagged, and other devices can rely
on the tags being assigned by the time they get notified about the new device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
When a device is added or removed, notify all internal devices about the
device change. This allows all devices to configure themselves depending on
other devices in the system. Prime use-case here is an internal touchpad that
wants to know if an external mouse is connected.
On device added, notification goes both ways: existing devices are notified
about the new device, and the new device is notified about existing devices.
On device removed, notification only goes one way.
In both cases, the internal notification is complete before the event is sent
to the caller.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
A device may disappear and a new device may re-appear with the same device
node while the original device is suspended. Prevent a device resume to open
the wrong device.
In a path context, a changing syspath is the only indicator we get of the
device changing.
In a udev context, if the device was removed and libinput_dispatch() was
called, we can short-cut the syspath comparison by setting it to NULL.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The evdev fallback dispatch supports enabling and disabling devices. That's
fairly easy to support since we don't (yet) have extra event generation within
the fallback backend. Thus, we can simply close the fd and re-open it again
later.
Touchpads are currently excluded here, they generate extra events on tapping,
scrolling, and software buttons and need a more complex implementation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
No functional changes, just prep work for an upcoming patch
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This bitmask reflects the hw state, prefix it accordingly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
