For conditional touchpad disabling we need two pieces of knowledge: is the
device an internal touchpad and is another device an external mouse-like
device. For that use-case it's enough to tag any device that's on USB and
Bluetooth with pointer capabilities as external mouse. A more complex can be
done when needed.
The tag function is part of the dispatch interface (to save on udev code) and
called before the caller is notified about the new device, i.e. the device is
fully configured by the time it needs to be tagged, and other devices can rely
on the tags being assigned by the time they get notified about the new device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
When a device is added or removed, notify all internal devices about the
device change. This allows all devices to configure themselves depending on
other devices in the system. Prime use-case here is an internal touchpad that
wants to know if an external mouse is connected.
On device added, notification goes both ways: existing devices are notified
about the new device, and the new device is notified about existing devices.
On device removed, notification only goes one way.
In both cases, the internal notification is complete before the event is sent
to the caller.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
We may be in the middle of a software button click or a tap, so make sure we
go back to the device-neutral state by unwinding.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
We previously called this function only before device removal, so failing to
update the button state didn't matter. To make this function generic for the
device suspend/resume, we need to keep track of the button/key count properly.
If we have a key down multiple times on suspend though, log a bug.
The dispatch should release the keys before we even get here (functionality
added in a subsequent patch).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
A device may disappear and a new device may re-appear with the same device
node while the original device is suspended. Prevent a device resume to open
the wrong device.
In a path context, a changing syspath is the only indicator we get of the
device changing.
In a udev context, if the device was removed and libinput_dispatch() was
called, we can short-cut the syspath comparison by setting it to NULL.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The evdev fallback dispatch supports enabling and disabling devices. That's
fairly easy to support since we don't (yet) have extra event generation within
the fallback backend. Thus, we can simply close the fd and re-open it again
later.
Touchpads are currently excluded here, they generate extra events on tapping,
scrolling, and software buttons and need a more complex implementation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Rather than adding a config interface to disable a device merely allow a
caller to toggle the "send events" mode on the device. If off, the device
won't send events (though further events may be received depending on the
current state of the device).
Default is enabled, i.e. the device sends events.
A special mode is added to the obvious enable/disable: disable the device when
an external mouse is connected. Once set, the device will be enabled when no
mouse is present and stop sending events otherwise. This isn't hooked up to
anything yet though.
Built into the config API is the default option of "enabled". Any device
supports this, for the obvious reason. Disabling or conditionally disabling is
left to the implementation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
No functional changes, just prep work for an upcoming patch
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This bitmask reflects the hw state, prefix it accordingly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Doing a tap-and-drag gesture but just holding the finger instead of moving
should trigger a timeout and still switchin into tap-and-drag.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
It should be possible to initiate a drag by tapping-drag, but continue
it by pressing a physical button continuing to drag by subsequent finger
motions.
As the generic evdev layer helps us ignore multiple button presses we
can have the tap machine run completely separate from and uneffected by
regular physical button presses, making the tap FSM much simpler than
adding new states for handling button presse life times from outside
of the tap state machine.
A touchpad test is updated to test click while tapping instead of tap
FSM break out. The updated test is re-added but only for clickpads only.
The tap FSM svg is updated to say "clickpad button press" instead of
"phys button press".
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
New configuration API:
libinput_device_config_calibration_has_matrix()
libinput_device_config_calibration_set_matrix()
libinput_device_config_calibration_get_matrix()
libinput_device_config_calibration_get_default_matrix()
Deprecates libinput_device_calibrate().
For coordinate transformation, we're using a precalculated matrix. Thus, to
support ..._get_matrix() we need to store the original user-specified matrix
separately, in an unmangled state.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
WL_CALIBRATION is a weston-specific property that required the translation
component of the matrix to be in pixels. libinput can't provide calibration
based on unknown outputs, so drop support for this property.
The basic functionality is maintained, renaming just makes the change in
behavior more explicit.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The big change here is the requirement to have the translation component in a
device-normalized coordinate space. Without that, we cannot reliably rotate as
the coordinate space is effectively unknown and may differ between the axes.
This affects any rotation matrix or translation matrix, pure scale matrices
were working just fine since they're unit-less.
Requiring the matrix in device-normalized space makes it possible for libinput
to rotate or otherwise handle the matrix independent of the screen resolution.
The rotation matrix is documented in a bit more detail to make it easier for
users to figure it out.
This changes the definition of the WL_CALIBRATION property (which is currently
broken).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
We apply calibration to single-touch and absolute devices, but we might as
well do so for multitouch events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
container_of() accesses tp for offset calculation. Which is fine, but
Coverity doesn't know that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The current conditions result in _elem being assigned _arr[i] before the
condition is checked. This is fine since we then break from the loop and don't
access it anyway, but it makes Coverity unhappy.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Both motion and timeout expiry transition into the TOUCH_2_HOLD state, but
only for motion do we need to cancel the current timeout.
Found by Coverity.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Let the caller decide what to do with the fd.
In the current code the caller can't know if the fd was closed on error since
we return NULL on malloc failure as well as on epoll_ctl() failure. In the
latter case the fd was closed, not in the former. The caller had to close
the fd anyway (and all three callers do), so drop closing the fd from this
function.
Found by Coverity.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Our static library leaks symbols like crazy, some of which are likely
conflicts with users of this library (log_msg, open_restricted, ...).
Disale static linking by default so we don't have to spend time debugging
this.
Related to:
https://bugs.freedesktop.org/show_bug.cgi?id=82292https://bugs.freedesktop.org/show_bug.cgi?id=82785
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
When removing a device, its not guaranteed that all button or key
presses have been released, resulting in an invalid seat wide button
count.
Note that kernel devices normally will send release events when being
unplugged, but this won't happen when removing a device from the path
backend.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Keep track of the number of times a given button or key is pressed on a
device. For regular mouse devices or keyboard devices, such a count will
never exceed 1, but counting button presses could help when button
presses with the same code can originate from different sources. One could
for example implement overlapping tap-drags with button presses by
having them deal with their own life-time independently, sorting out
when the user should receive button presses or not depending on the
pressed count.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The kernel may send a 'release' event without ever having sent a key
'pressed' event in case the key was pressed before libinput was
initiated. Ignore these events so that we always guarantee a release
event always comes after a pressed event for any given key or button.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
It's up to a evdev device backend to configure seat capabilities it
supports. Even though it may be possible for a touchpad to have extra
keys, there is currently no support for sending keyboard events from the
touchpad driver, and if that would be implemented, it'd be a detail of
the touchpad driver, not the generic evdev device part.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
We had reports that the top software button area is hard to hit for those
using the trackpoint and clicking the buttons with their thumb.
Analysis of event recordings (3 different people) for left, right and middle
clicks shows that there is a significant amount of events up to about 10mm
(with outliers up to 12mm) from the top of the touchpad. That maps to 15%.
Interestingly, the middle button is not affected by this, presumably the
haptic feedback of the little dots sticking out from the surface make hitting
the button easier.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Because the axes that tool reports can change depending on the tool in use, we
want to be able to provide functionality to determine which axes each tool can
support.
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
With tablets that don't support serial numbers, we can't guarantee that the tool
objects are unique. Because of this, this can give clients the false impression
that a tool without a serial number is being shared between tablets when it very
well might not be. So we keep tools without serial numbers in a list that's
local to the tablet they belong to, and keep tools with serials in a list that's
global within the libinput context.
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
On semi-mt touchpads the reported position of the first finger down may
jump when the pad switches from st to mt mode. When this happens a large
delta gets seen on the first finger at the same time the second fingers
is first seen down, causing a spurious 2 finger scroll event.
Reset the motion history when nfingers changes on semi-mt pads to avoid this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Because the values for each axis were stored in struct tablet_dispatch in
millimeters, coordinates were not being translated properly to screen
coordinates. This stores the values internally as raw coordinates, and only
translates them to millimeters if the client asks for it.
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
More expressive in the caller and less ambiguous about return values (is it 1?
is it non-zero? can it be negative?)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Force a cast of the input arguments to a double before the divide, rather
than after the divide.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Multi-touch pads may track less touches then they can report fingers being
present through BTN_TOOL_FOO. So create fake touches for fingers reported
by BTN_TOOL_FOO on multi-touch pads too (when necessary).
This fixes e.g. 3 finger tap not working on the T440s.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
