On the Asus Vivobook Flip 14, the tablet mode switch is unreliable and always
on. Instead of marking every device as 'do not suspend', just mark the tablet
switch itself.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If the tilt angle on tip down is not 0 set the touch arbitration to a
rectangle around the assumed position of the hand. This assumed position is
right of the tip for a rightwards tilt and left of the tip for a leftwards
tilt (i.e. left-handed mode). The rectangle is 200x200mm with a 20x50mm
NW of the tip or NE for left-handed. In other words, if the period below is
the tip, the rectangle looks like this:
+-----------+ +-----------+
| . | <- for rightwards tilt | . |
| | | |
| | | |
| | for leftwards tilt -> | |
+-----------+ +-----------+
Touches within that rectangle are canceled, new touches are ignored. As the
tip moves around the rectangle is updated but touches are only cancelled on
the original tip down. While the tip is down, new touches are ignored in the
exclusion area but pre-existing touches are not cancelled.
This is currently only implemented in the fallback interface, i.e. it will
only work for Cintiqs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This enables us to specify the location that needs to be arbitrated, rather
than just disabling the whole device altogether. This patch just adds the
hooks, no implementation.
This is internal API only, one backend can specify an area in mm which gets
converted to device coordinates in the target device and arbitrated there.
Right now, everything simply passes NULL.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If we don't have tool-based palm detection, make sure our touch is labelled as
"not palm" during touch down. Otherwise that slot remains on palm forever if
it gets tagged as palm through some other means.
This currently has no effect, nothing in the code would label the touch as
palm. This is prep work for better touch arbitration.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This enables us to change the types of touch arbitration, with the focus on
allowing location-based touch arbitration as well as the more generic "disable
everything".
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When a hand is resting on a pen+touch device, lifting the hand may remove the
stylus from proximity before the hand leaves the surface. If the kernel
performs touch arbitration, this triggers a touch down on proximity out,
followed by a touch up immediately after when the hand stops touching.
This can cause ghost touch events. Prevent this by using a timer-based
arbitration toggle.
Same as 2a378beab0 but for the fallback
interface.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This leaves a bug open, on a Lenovo T440 generation touchpad with top software
buttons, the button will not be leased correctly. This is caused by
device->is_suspended=true by the time we try to clear the state and the
button events thus getting filtered.
This used to affect all touchpads, this patch just moves it so it only affects
the T440-like devices now.
Fixes#233
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Probably covered elsewhere in a more generic test anyway but let's have one we
know is executed for all touchpads.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a middle-button-emulating device is removed with one button down, the timer
never gets cancelled and triggers an assert during device removal.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
After the test device was removed, run one more libinput_dispatch(). This may
catch some errors that happen due to the device removal that were ignored for
now.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
An emulated button is recorded as BTN_MIDDLE in the key down mask. If the
device is removed in that state, the BTN_MIDDLE event processed triggers
an assertion when we try to send out the event twice.
Fixes#201
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a device was removed while a button was held down and within the timeout,
the timer was never cancelled (and removed from the timer list), triggering an
assert during device removal.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Drop hard meson C++/CPP dependency, only needed for the build-time
header inclusion test, build the test only in case C++/CPP compiler
is available.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The Contour RollerMouse have a button for "double click" which emulates
a double click. The two clicks are so close together that with libinput
heuristics it looks like a worn-out button and triggers debouncing
functionality.
This commit adds support for the RollerMouse Free 2 and RollerMouse
Re:d.
Fixeslibinput/libinput#204
As with some other convertible devices, the keyboard is disabled by the system when the device is in tablet mode.
The volume control keys on the side of the unit are not, but still appear from the keyboard to the system.
Don't disable the keyboard when in tablet mode.
Tested working.
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/x86_64-linux-gnu/libinput/libinput-measure-fuzz", line 464, in <module>
main(sys.argv)
File "/usr/lib/x86_64-linux-gnu/libinput/libinput-measure-fuzz", line 458, in main
print('Error: {}'.format(e.message))
AttributeError: 'InvalidConfigurationError' object has no attribute 'message'
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>:
