We have heuristics for detecting whether a keyboard is internal or external,
but in some cases (e.g. Surface 3) these heuristics fail. Add a udev property
that we can apply to these cases so we have something that's reliable.
This will likely eventually become ID_INPUT_KEYBOARD_INTEGRATION as shipped by
systemd, similar to the touchpad property.
https://bugs.freedesktop.org/show_bug.cgi?id=101101
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This was originally left outside of the button areas in case users tap in
those zones, but we're getting false tap events in that zone.
On a 100mm touchpad, the edge zone is merely 5mm, it's acceptable to ignore
taps in that area even in the software button. We can revisit this if we see
tap detection failures in the future.
https://bugzilla.redhat.com/show_bug.cgi?id=1415796
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Sequence triggered by the xorg driver, but basically: if the touchpad is
destroyed before the lid switch, the event listener wasn't removed and an
assertion was triggered.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of reimplementing a for loop every time.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Trackpoints are situated so that a user is pretty much guaranteed to trigger
some palm interaction, even if on a small touchpad. Always enable trackpoint
monitoring on touchpads where required.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Prefix device log messages with the device's sysname so it's more obvious
where the messages are coming from. This makes it much easier to grep for a
specific device's messages but also adds some identifier to messages that
were previously without any identifier (e.g. all the state machine debugging)
All info and error messages also automatically prefix the device name, so
those messages are standardised too, e.g
an info message now:
event4 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
a debug message now:
event4 - using pressure-based touch detection
And since this required changing a lot of the strings in messages anyway,
polish a few minor things too.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
dwt is needed on internal touchpads only and those external ones that are a
combo device. This also now gives us the same check for palm detect and dwt.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Specify the layout of the combo so we know when to initialize palm detection.
This allows us to drop palm detection on external touchpads otherwise,
replacing the wacom-specific check with something more generic..
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
We don't initialize click methods on devices with physical buttons. This model
is a special case, it's not a clickpad but it only has one button (because one
button is all you ever need and whatnot).
https://bugs.freedesktop.org/show_bug.cgi?id=99283
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Set the dispatch type on creation, then check that whenever we try to get the
dispatch struct. This avoids a potential mismatch between the backends.
Plus, use of container_of means we're not dependent on the exact layout
anymore.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Don't rely on BTN_TOUCH for "finger down", the value for that is hardcoded in
the kernel and not always suitable. Some devices need a different value to
avoid reacting to accidental touches or hovering fingers.
Implement a basic Schmitt trigger, same as we have in the synaptics driver. We
also take the default values from there but these will likely see some
updates.
A special case is when we have more fingers down than slots. Since we can't
detect the pressure on fake fingers (we only get a bit for 'is down') we
assume that *all* fingers are down with sufficient pressure. It's too much of
a niche case to have this work any other way.
This patch drops the handling of ABS_DISTANCE because it's simply not needed
anymore.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We need to remember whether a tap was down or just hovering, otherwise we mess
up the state machine when we send tap release events for taps that never
switched to TOUCH_BEGIN. This is quick fix, really we should have a new state
here, but that's a lot harder to implement.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Don't call get_switch_event immediately, doing so for non-switch events is
documented as a bug. Check the event type instead, if that one is correct then
we can assume the rest works.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Add listener for lid switch events, disable touchpad on switch event.
Signed-off-by: James Ye <jye836@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Now that the acceleration code doesn't use dpi-normalized coordinates anymore,
we don't need to use them in the touchpad code. Switch to physical distances
instead, it makes debugging a lot saner.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Make sure the events we deal with are the ones we actually honor. This reduces
the chance that we accidentally process events we weren't event supposed to
get based on some earlier device decision.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
We used to normalize all deltas to equivalents of a 1000dpi mouse before
passing it into the acceleration functions. This has a bunch of drawbacks, not
least that we already have to un-normalize back into device units for a few
devices already (trackpoints, tablet, low-dpi mice).
Switch the filter code over to use device units, relying on the dpi set
earlier during filter creation to convert to normalized. To make things easy,
the output of the filter code is still normalized data, i.e. data ready to be
handed to the libinput caller.
No effective functional changes. For touchpads, we still send normalized
coordinates (for now, anyway). For the various filter methods, we either drop
the places where we unnormalized before or we normalize where needed.
Two possible changes: for trackpoints and low-dpi mice we had a max dpi factor
of 1.0 before - now we don't anymore. This was only the case if a low-dpi
mouse had more than 1000dpi (never true) or a trackpoint had a const accel
lower than 1.0 (yeah, whatever).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This has no real effect just yet because we don't use a touchpad's dpi
anywhere in the touchpad code. Only the acceleration code wants it but all
touchpads use the same acceleration method, and that one doesn't care about
the dpi.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This requires to expand the blacklisting to be a bit more specific so we don't
initialize dwt config on devices that won't need it.
https://bugs.freedesktop.org/show_bug.cgi?id=99140
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The Elantech touchpad on my Asus Vivobook doesn't release BTN_TOOL_FINGER on
up. If the touchpad was used before libinput initializes, the kernel filters
the event because its state is already set. We never receive it and keep
ignoring all events until the first switch to BTN_TOOL_DOUBLETAP and back.
On touchpad init sync the BTN_TOOL_FINGER state and set it accordingly. This
is the only event that can be legitimately down on init. We don't care about
BTN_TOUCH because ignoring an ongoing touch on init is generally a good idea
and we can ignore any multifinger gesture as well.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This touchpad has cursor jumps for 2-finger scrolling that also affects the
single-finger emulation. So disable any multitouch bits on this device and
disallow the 2-finger scroll method. This still allows for 2-finger
tapping/clicking.
https://bugs.freedesktop.org/show_bug.cgi?id=91135
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Move the code from the touchpad code into the more generic evdev code
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Taking the last 4 points means factoring in a coordinate that may be more than
40ms in the past - or even more when the finger moves slowly and we don't get
events for a while. This makes the pointer more sluggish and slower to catch up
with what the finger is actually doing.
We already have the motion hysteresis as a separate item to prevent jumps (and
thus adds some delay to the movement), the calculation over time doesn't
provide enough benefit to justify the sluggish pointer.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
No functional changes, just to filter out devices that don't match
immediately.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
silence clang warning:
evdev-mt-touchpad.c:1017:7: warning: using floating point absolute value
function 'fabs' when argument is of integer type [-Wabsolute-value]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Some trackpoints, notably the one on the Lenovo T460s have a tendency to send
the odd event even when they're not actually used. Trackpoint events trigger
palm detection (see 0210f1fee1) and thus effectively disable the touchpad,
causing the touchpad to appear nonresponsive.
Fix this by requiring at least 3 events from a trackpoint before palm
detection is enabled. For normal use it's hard enough to trigger a single
event anyway so this should not affect the normal use-case.
https://bugzilla.redhat.com/show_bug.cgi?id=1364850
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
