Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Make check_2fg_scroll functionality available outside of touchpad.c ,
no functional changes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Make it easier to hit the topbutton area when the touchpad is disabled,
normally we don't want to make the topbutton area too big, so as to not
interfere with normal touchpad operation, but when disabled we have no such
worries.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On a TOPBUTTONPAD, we can't disable the touchpad altogether - the trackstick
relies on the touchpad's top software buttons.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For touchpads with top softbuttons we don't want to fully disable the touchpad
on suspend, as we want to keep the top softbuttons working for the trackpoint.
So in the suspended state some of the touchpad sub-statemachines will keep
running (e.g. buttons) where others (e.g. tap) will not. This means that
we will need to clear the touchpad state on resume too, to avoid things
being in an inconsistent state after resume.
This commit factors out the state clearing code into a helper functions, so
that the same code can be used on resume.
No functional changes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The touchpad top softbuttons such as found on the Lenove T440 are intended for
use with the trackstick. Route their events through the trackstick, so that
they can be used for e.g. middle button scrolling with the trackstick.
Note that sending top button events to a disabled trackpoint makes no sense
(and will mess up internal state). Likely a user with a disabled trackpoint
will still expect the top buttons to work, so rather than not sending events
in that case, simply treat a suspendeded trackpoint as not being there, and
send the events directly from the touchpad device.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The top soft buttons are intended for use with a trackpoint, and to e.g.
make middle button scrolling work correctly, we must post the events for
these "buttons" through the trackpoint device.
This commit is a preparation patch for this, it adds a link to the
trackpoint to the touchpad, but does not yet do anything with it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We have the ability for a device to form a link to another device through the
device_added / device_removed callbacks. A device having such a link to
another device may also want to know when that other device is disabled /
enabled (suspended / resumed). So add a notification mechanism for this too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Most trackpoint users want to be able to scroll using the trackpoint with
the middle button pressed, add support for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
So that it can be used for middle button trackpoint scrolling too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For conditional touchpad disabling we need two pieces of knowledge: is the
device an internal touchpad and is another device an external mouse-like
device. For that use-case it's enough to tag any device that's on USB and
Bluetooth with pointer capabilities as external mouse. A more complex can be
done when needed.
The tag function is part of the dispatch interface (to save on udev code) and
called before the caller is notified about the new device, i.e. the device is
fully configured by the time it needs to be tagged, and other devices can rely
on the tags being assigned by the time they get notified about the new device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
When a device is added or removed, notify all internal devices about the
device change. This allows all devices to configure themselves depending on
other devices in the system. Prime use-case here is an internal touchpad that
wants to know if an external mouse is connected.
On device added, notification goes both ways: existing devices are notified
about the new device, and the new device is notified about existing devices.
On device removed, notification only goes one way.
In both cases, the internal notification is complete before the event is sent
to the caller.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
We may be in the middle of a software button click or a tap, so make sure we
go back to the device-neutral state by unwinding.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
We previously called this function only before device removal, so failing to
update the button state didn't matter. To make this function generic for the
device suspend/resume, we need to keep track of the button/key count properly.
If we have a key down multiple times on suspend though, log a bug.
The dispatch should release the keys before we even get here (functionality
added in a subsequent patch).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
A device may disappear and a new device may re-appear with the same device
node while the original device is suspended. Prevent a device resume to open
the wrong device.
In a path context, a changing syspath is the only indicator we get of the
device changing.
In a udev context, if the device was removed and libinput_dispatch() was
called, we can short-cut the syspath comparison by setting it to NULL.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The evdev fallback dispatch supports enabling and disabling devices. That's
fairly easy to support since we don't (yet) have extra event generation within
the fallback backend. Thus, we can simply close the fd and re-open it again
later.
Touchpads are currently excluded here, they generate extra events on tapping,
scrolling, and software buttons and need a more complex implementation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Rather than adding a config interface to disable a device merely allow a
caller to toggle the "send events" mode on the device. If off, the device
won't send events (though further events may be received depending on the
current state of the device).
Default is enabled, i.e. the device sends events.
A special mode is added to the obvious enable/disable: disable the device when
an external mouse is connected. Once set, the device will be enabled when no
mouse is present and stop sending events otherwise. This isn't hooked up to
anything yet though.
Built into the config API is the default option of "enabled". Any device
supports this, for the obvious reason. Disabling or conditionally disabling is
left to the implementation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
No functional changes, just prep work for an upcoming patch
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This bitmask reflects the hw state, prefix it accordingly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Doing a tap-and-drag gesture but just holding the finger instead of moving
should trigger a timeout and still switchin into tap-and-drag.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
For adding a litest device to an existing context.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The litest features overlap with the litest device specifiers, so it's easy to
pass in LITEST_MOUSE where LITEST_POINTER should be passed in, and vice versa.
Lacking proper type checking the best we can do here is simply move the
devices into the negative range and check for that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The most common error running the test suite is not running as root, but the
error message is hard to interpret. Make it more explicit when it failed,
printing the strerror of the errno.
Note that libevdev 1.3 is needed to get EACCES instead of EBADF
http://cgit.freedesktop.org/libevdev/commit/?id=debe9b030c8069cdf78307888ef3b65830b25122
A workaround is put in place for now until libevdev 1.3 is commonplace.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
openSUSE 12.3 ships with check-0.9.9 and subsequently fails to build
the tests. Change the call to look for check >= 0.9.10 where that
symbol is available.
Signed-off-by: Jan Engelhardt <jengelh@inai.de>
This fixes the following (false positive) compiler warnings:
litest-alps-semi-mt.c: In function 'alps_touch_move':
litest-alps-semi-mt.c:163:3: warning: 'b' may be used uninitialized in this function [-Wmaybe-uninitialized]
send_abs_mt_xy(d, r, b);
^
litest-alps-semi-mt.c:163:3: warning: 'r' may be used uninitialized in this function [-Wmaybe-uninitialized]
litest-alps-semi-mt.c: In function 'alps_touch_down':
litest-alps-semi-mt.c:127:3: warning: 'b' may be used uninitialized in this function [-Wmaybe-uninitialized]
send_abs_mt_xy(d, r, b);
^
litest-alps-semi-mt.c:127:3: warning: 'r' may be used uninitialized in this function [-Wmaybe-uninitialized]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
It should be possible to initiate a drag by tapping-drag, but continue
it by pressing a physical button continuing to drag by subsequent finger
motions.
As the generic evdev layer helps us ignore multiple button presses we
can have the tap machine run completely separate from and uneffected by
regular physical button presses, making the tap FSM much simpler than
adding new states for handling button presse life times from outside
of the tap state machine.
A touchpad test is updated to test click while tapping instead of tap
FSM break out. The updated test is re-added but only for clickpads only.
The tap FSM svg is updated to say "clickpad button press" instead of
"phys button press".
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Allows to set CK_VERBOSITY to be set to "silent", "minimal", "normal", or
"verbose". Falls back to CK_NORMAL if unset.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
New configuration API:
libinput_device_config_calibration_has_matrix()
libinput_device_config_calibration_set_matrix()
libinput_device_config_calibration_get_matrix()
libinput_device_config_calibration_get_default_matrix()
Deprecates libinput_device_calibrate().
For coordinate transformation, we're using a precalculated matrix. Thus, to
support ..._get_matrix() we need to store the original user-specified matrix
separately, in an unmangled state.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Basic tests for rotation, translation and scaling events.
Note that tests need to be added separately for single-touch and touch
devices, this is a restriction of the litest framework.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
WL_CALIBRATION is a weston-specific property that required the translation
component of the matrix to be in pixels. libinput can't provide calibration
based on unknown outputs, so drop support for this property.
The basic functionality is maintained, renaming just makes the change in
behavior more explicit.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The big change here is the requirement to have the translation component in a
device-normalized coordinate space. Without that, we cannot reliably rotate as
the coordinate space is effectively unknown and may differ between the axes.
This affects any rotation matrix or translation matrix, pure scale matrices
were working just fine since they're unit-less.
Requiring the matrix in device-normalized space makes it possible for libinput
to rotate or otherwise handle the matrix independent of the screen resolution.
The rotation matrix is documented in a bit more detail to make it easier for
users to figure it out.
This changes the definition of the WL_CALIBRATION property (which is currently
broken).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
