If we don't have tool-based palm detection, make sure our touch is labelled as
"not palm" during touch down. Otherwise that slot remains on palm forever if
it gets tagged as palm through some other means.
This currently has no effect, nothing in the code would label the touch as
palm. This is prep work for better touch arbitration.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This enables us to change the types of touch arbitration, with the focus on
allowing location-based touch arbitration as well as the more generic "disable
everything".
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When a hand is resting on a pen+touch device, lifting the hand may remove the
stylus from proximity before the hand leaves the surface. If the kernel
performs touch arbitration, this triggers a touch down on proximity out,
followed by a touch up immediately after when the hand stops touching.
This can cause ghost touch events. Prevent this by using a timer-based
arbitration toggle.
Same as 2a378beab0 but for the fallback
interface.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
An emulated button is recorded as BTN_MIDDLE in the key down mask. If the
device is removed in that state, the BTN_MIDDLE event processed triggers
an assertion when we try to send out the event twice.
Fixes#201
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When we disable the touch device, any existing touches should be cancelled,
not just released.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Anything that merely requires a once-off check during initialization can just
use the quirks directly, no need to copy them over to the model flags.
Fixes#146
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We already had a check to only pair trackpoints and internal keyboards
but for the ThinkPad Compact Bluetooth Keyboard with TrackPoint that isn't
sufficient - it's an external keyboard that contains a trackpoint. Explicitly
ignore external keyboard, we never want to shut those down in tablet mode
anyway.
Fixes#119
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This used to do a lot more but now it can be handled as simple switch
statement. Bonus: we get to log a bug if we ever get here in NONE state.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
destroy isn't called until the last libinput_device_unref(), so we may trigger
a debounce timer after the device was removed. The same fix is neded for the
touchpad interface.
Fixes https://gitlab.freedesktop.org/libinput/libinput/issues/72
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This removes the artificial 3 keyboard limit. If you have more internal
keyboards than that, something is wrong in your setup but that shouldn't stop
us from working. Or more specificially: this can happen easily when running
tests so let's not fail the test suite because we created a few hundred
keyboards.
We'll still throw out a log message though.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This removes the artificial 3 keyboard limit. If you have more internal
keyboards than that, something is wrong in your setup but that shouldn't stop
us from working. Or more specificially: this can happen easily when running
tests so let's not fail the test suite because we created a few hundred
keyboards.
We'll still throw out a log message though.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of a scroll wheel these mice feature trackpoint-like sticks which
generate a huge amount of scroll events that need to be handled differently
than scroll wheel events.
Signed-off-by: Peter Ganzhorn <peter.ganzhorn@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When the X1 Yoga is in tablet mode, one capacitative touch button (windows
key, sends KEY_LEFTMETA) and two side volume buttons are accessible on the
front. The key event comes through the internal keyboard that we disabled in
tablet mode so it stops working.
Luckily the Yoga physically disables the "main" keyboard when in tablet mode,
so all we have to do is skip our code to disable the keyboard and the keys are
working again.
https://bugs.freedesktop.org/show_bug.cgi?id=103749
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The hysteresis-returned point always differs from the current point, even if
the hysteresis kicks in. We need to compare to the hysteresis center.
And the returned point is only the new center if we exceed the margin,
otherwise the center stays as-is.
The touch_fuzz() test only succeeded for this because for the values we were
introducing jitter by, the kernel filtered out all the actual movement so
these paths weren't hit.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This changes the hysteresis region to an ellipse (usually a circle), where
previously it was a rectangle (usually square).
Using an ellipse means the algorithm is no longer more sensitive in some
directions than others. It is now omnidirectional, which solves a few
problems:
* Moving a finger in small circles now creates circles, not squares.
* Moving a finger in a curve no longer snaps the cursor to vertical
or horizontal lines. The cursor now follows a similar curve to the
finger.
https://bugs.freedesktop.org/page.cgi?id=splinter.html&bug=105306
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Commit db3b6fe5f7 "fallback: change to handle the state at EV_SYN time"
introduced regressions for two types of event sequences.
One is a kernel bug - some devices/drivers like the asus-wireless send a key
press + release within the same event frame which now cancels out and
disappears into the ether. This should be fixed in the kernel drivers but
there appear to be enough of them that we can't just pretend it's an outlier.
The second issue is a libinput bug. If we get two key events in the same frame
(e.g. shift + A) we update the state correctly but the events are sent in the
order of the event codes. KEY_A sorts before KEY_LEFTSHIFT and our shift + A
becomes A + shift.
Fix this by treating key events as before db3b6fe5f7 - by sending them out
as we get them.
https://bugs.freedesktop.org/show_bug.cgi?id=104030
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The current debouncing code monitors events and switches on when events are
too close together. From then on, any event can be delayed.
Vicente Bergas provided an algorithm that avoids most of these delays:
on a button state change we now forward the change without delay but start a
timer. If the button changes state during that timer, the changes are
ignored. On timer expiry, events are sent to match the hardware state
with the client's view of the device. This is only done if needed.
Thus, a press-release sequence of: PRP sends a single press event, a sequence of
PRPR sends press and then the release at the end of the timeout. The timeout
is short enough that the delay should not be noticeable.
This new mode is called the 'bounce' mode. The old mode is now referred to as
'spurious' mode and only covers the case of a button held down that loses
contact. It works as before, monitoring a button for these spurious contact
losses and switching on. When on, button release events are delayed as before.
The whole button debouncing moves to a state machine which makes debugging a
lot easier. See the accompanying SVG for the diagram.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The previous approach was to remember the last event and flush it at the right
time. The new approach is to update the device state during the frame and send
out the events at EV_SYN time.
This gives us two advantages: we are not dependent on the kernel order of how
events come in and we can process events depending on other events in the same
frame. This will come in handy later for button debouncing.
This is also the approach we have in the touchpad and tablet backends.
Two FIXMEs are left in place, the button debouncing code and the lid switch
code. Both need to be handled in future patches.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Once the lid is closed, the keyboard event listener is set up to open the lid
for us on keyboard events. With the right sequence, we can trigger the
listener to be added to the list multiple times, triggering an assert in the
list test code (or an infinite loop in the 1.8 branch).
Conditions:
* SW_LID value 1 - sets up the keyboard listener
* keyboard event - sets lid_is_closed to false
* SW_LID value 0 - is ignored because we're already open
* SW_LID value 1 - sets up the keyboard listener again
https://bugs.freedesktop.org/show_bug.cgi?id=103298
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Because on some devices the keyboard is where the fingers are holding the
device when in tablet mode.
https://bugs.freedesktop.org/show_bug.cgi?id=102729
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Split out the fallback-specific device handling from the more generic
evdev-specific handling (which is supposed to be available for all devices).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
