We haven't supported XML libraries other than Expat since 2013.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=69801
Signed-off-by: Simon McVittie <smcv@collabora.com>
Reviewed-by: Philip Withnall <withnall@endlessm.com>
The version of expat that added the .pc file was released in 2012.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=69801
Signed-off-by: Simon McVittie <smcv@collabora.com>
Reviewed-by: Philip Withnall <withnall@endlessm.com>
Explicitly enumerate the states where we reset the maybe_authenticated
flag, and assert that _dbus_auth_do_work() doesn't return an impossible
or invalid state (by source code inspection, it doesn't).
This silences -Wswitch-enum. Based on part of a patch from
Thomas Zimmermann.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Reviewed-by: Philip Withnall <withnall@endlessm.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=98191
If the test-bus test is run under Valgrind, its code to detect FD leaks
accidentally writes off the end of the fd_set it uses, as Valgrind opens
some high FDs (≥1024) for internal use.
Ignore those FDs. Realistically, they are never going to be leaks — in
order to have a false negative from omitting this check, D-Bus would
have to allocate and not leak all the FDs up to FD_SETSIZE, and then
leak the first FD over that which it allocated. D-Bus never allocates
anywhere near that number of FDs concurrently.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: Simon McVittie <smcv@collabora.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=99839
This silences -Wswitch-default.
Based on part of a patch from Thomas Zimmermann.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Reviewed-by: Philip Withnall <withnall@endlessm.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=98191
For these types, the tagged union in the Element struct does not store
anything we could usefuly compare.
Based on part of a patch from Thomas Zimmermann.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Reviewed-by: Philip Withnall <withnall@endlessm.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=98191
This silences -Wswitch-default.
Based on part of a patch from Thomas Zimmermann.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Reviewed-by: Philip Withnall <withnall@endlessm.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=98191
This silences -Wswitch-default.
Based on part of a patch from Thomas Zimmermann.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Reviewed-by: Philip Withnall <withnall@endlessm.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=98191
This silences -Wswitch-default.
Based on part of a patch from Thomas Zimmermann.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Reviewed-by: Philip Withnall <withnall@endlessm.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=98191
This silences -Wswitch-default.
Based on part of a patch from Thomas Zimmermann.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Reviewed-by: Philip Withnall <withnall@endlessm.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=98191
This silences -Wswitch-default.
Based on part of a patch from Thomas Zimmermann.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Reviewed-by: Philip Withnall <withnall@endlessm.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=98191
We only register signal_handler() for the three signals that we want
to handle as "kill dbus-daemon and exit", so there's no point in the
switch. Silence -Wswitch-default by removing it altogether.
The variable name got_fatal_signal and the verbose message are both
misleading, because actually this is a handler for multiple signals,
not just SIGHUP. Rename them to be generic.
Based on part of a patch from Thomas Zimmermann.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Reviewed-by: Philip Withnall <withnall@endlessm.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=98191
Also comment why it's OK to not do anything for the modes that don't
have a header. We are effectively treating the default case as one
of those, on the assumption that future modes are more likely to
lack a header than to have one.
Based on part of a patch from Thomas Zimmermann.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Reviewed-by: Philip Withnall <withnall@endlessm.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=98191
Based on part of a patch from Thomas Zimmermann.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Reviewed-by: Philip Withnall <withnall@endlessm.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=98191
This silences -Wswitch-default.
Based on a patch from Thomas Zimmermann.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Reviewed-by: Philip Withnall <withnall@endlessm.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=98191
This silences -Wswitch-default.
Part of a larger commit from Thomas Zimmermann.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Reviewed-by: Philip Withnall <withnall@endlessm.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=98191
There should be no way signal_handler() can be called for a signal
we didn't ask for. If it somehow happens, ignore it.
Based on a patch from Thomas Zimmermann.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Reviewed-by: Philip Withnall <withnall@endlessm.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=98191
check_got_service_info() can't actually return an invalid
GotServiceInfo, but if it somehow does, we want to fail the test.
GOT_SOMETHING_ELSE already has that effect, and a similar meaning.
Based on a patch from Thomas Zimmermann.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Reviewed-by: Philip Withnall <withnall@endlessm.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=98191
One level of pointer indirection too many when passing the arguments to
dbus_message_append_args().
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=100568
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: Simon McVittie <smcv@collabora.com>
avc_init() in the SELinux code path is creating a new thread, we need to
set to capabilities before it gets created so it has the permission to
send audit messages.
It also make more sense to open the audit netlink before the different
logging callbacks are set.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=92832
[smcv: add comments explaining why initialization must happen in this
specific order]
Reviewed-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Bug-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=857660
Reviewed-by: Stephen Smalley <sds@tycho.nsa.gov>
(cherry picked from commit a3a5935a0a)
test_transient_services() was checking whether (config == NULL), then
shortly afterwards dereferencing config->bus_name (which is in fact
dereferenced on all branches of the function). Remove the check and add
some assertions to ensure a Config struct is always passed into the test
(which it currently is).
Coverity ID: 141877
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=99999
Reviewed-by: Simon McVittie <smcv@collabora.com>
The parameters to the test_pending_call_store_reply() call should match
those to the dbus_pending_call_set_notify() immediately after.
Coverity ID: 141876
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=99999
Reviewed-by: Simon McVittie <smcv@collabora.com>
With this support cmake and autotools generates cmake equivalent of
pkgconfig files on configure time named DBus1Config*.cmake. These
files are installed into the related directory where cmake expects
find_package related config files.
For instructions how to use this feature with clients see readme.cmake.
With previous DBus versions each cmake client using DBus as dependency
needed a related FindDBus*.cmake in its source distribution or in
the cmake binary packages. With the 'config' find package style support
provided by this patch this requirement has been removed.
The generated config file uses pkgconfig on unix or autotools to
fetch package build flags, which is the prefered way. On Windows
we do not want to require CMake users to have pkg-config installed
so it uses cmake buildin target export support for exporting all
targets into DBus1ConfigTargets*.cmake.
[smcv: make sure variable substitution works in Autotools too]
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=99721
Reviewed-by: Simon McVittie <smcv@collabora.com>
Reviewed-by: Ralf Habacker <ralf.habacker@freenet.de>
Signed-off-by: Simon McVittie <smcv@collabora.com>
Relocatable pkgconfig files are necessary when using packages installed to
a location that does not match the location for which they were compiled.
However, using ${pcfiledir} is problematic for system installations
in standard locations, because it interferes with pkg-config's
ability to filter out -I, -L options that are redundant with compiler
defaults (which is important if you are trying to use a newer version
of a library than the system copy).
In practice operating system vendors installing dbus to standard
locations use Autotools, so we enable relocatable builds by default
when building with CMake.
For simplicity, we're also not relocatable if the library directory
is something more complicated than lib or lib64 (e.g. under Debian
multiarch); we don't want to have to compute how many ../ to add.
This is non-trivial to determine in an Autotools build, so for now
there is no support for relocation when built with Autotools,
even as an opt-in feature.
Going via the ${original_prefix} variable is because under Autotools,
both ${prefix} and ${exec_prefix} technically default to NONE, with
NONE replaced with their real defaults of /usr/local and '${prefix}'
(respectively) later on. If we tried to expand ${prefix} at the time
that we choose the value of ${pkgconfig_prefix}, that would cause
a broken value "prefix=NONE" to be hard-coded.
[smcv: no relocation on Autotools, make it optional in CMake,
expand commit message]
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=99721
Reviewed-by: Simon McVittie <smcv@collabora.com>
Reviewed-by: Ralf Habacker <ralf.habacker@freenet.de>
Signed-off-by: Simon McVittie <smcv@collabora.com>
The documentation generally only mentioned the directory in /etc, even
though we actually prefer security policies to be installed in
/usr/share to allow for stateless and volatile systems (i.e. booting up
with an empty /etc).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=99901
Reviewed-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
This should be a no-op, but it shuts Valgrind up.
The reason for the warning is that we fill in event.events and
event.data.fd, but the union event.data actually contains more bytes
than that. We'll get the same partially initialized union back from the
kernel in socket_set_epoll_poll(), where we take events[i].data.fd and
ignore the rest. So the current code is safe, but valgrind is right to
worry.
This is an expanded version of an older patch by Simon McVittie.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=88808
Signed-off-by: Simon McVittie <smcv@debian.org>
Because this is in a subdirectory, it requires some extra `mkdir -p`
and some `nobase_` variables. Make all the installed-tests `nobase_`
for consistency.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=99825
Reviewed-by: Andre Moreira Magalhaes <andre.magalhaes@collabora.co.uk>
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
For Unix, this partially duplicates the D-Bus Specification, but
provides more detail about the intention of each search path element.
It also documents the non-standardized path elements searched by the
reference implementation.
For Windows, there are no standardized path elements in the D-Bus
Specification (and it isn't clear how useful it would be to standardize
them, since Windows software that uses D-Bus tends to be installed
as an integrated "stack" with a bundled copy of a suitable dbus-daemon),
so we just document what the reference implementation does.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=99825
Reviewed-by: Philip Withnall <withnall@endlessm.com>
[smcv: fix formatting nitpicks]
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
We're treating transient services as higher-priority than those in
the XDG_DATA_HOME or XDG_DATA_DIRS, which is consistent with systemd.
The specific list used by the standard session dbus-daemon will be
added to dbus-daemon(1) in the next commit.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=99825
Reviewed-by: Philip Withnall <withnall@endlessm.com>
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
To do this, we have to use the <standard_session_servicedirs/>.
A previous commit ensured that those don't provide any service files
we don't expect.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=99825
Reviewed-by: Philip Withnall <withnall@endlessm.com>
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
For configuration purposes these are treated as part of the standard
session service directories, to avoid having to add new configuration
syntax which would prevent an old dbus-daemon from reloading
successfully. From an API perspective, they're separate, though.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=99825
Reviewed-by: Philip Withnall <withnall@endlessm.com>
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
