- Remove pending call locking todo item
- dbus_connection_open now holds hard ref. Remove todo item
- do proper locking on _dbus_bus_check_connection_and_unref
and handle DBUS_BUS_STARTER. Remove todo item
- Warn on closing of a shared connection. Remove todo item
* bus/bus.c, bus/connection.c, bus/dispatch.c, dbus/dbus-bus.c,
dbus/dbus-connection.c: Use the dbus_connection_close_internal
so we don't get the warning when closing shared connections
* test/test-service.c, test/test-shell-service.c: Applications
don't close shared connections themselves so we unref instead of
close
* test/test-utils.c (test_connection_shutdown): Close the connection
* dbus/dbus-bus.c (_dbus_bus_check_connection_and_unref): Changed to
_dbus_bus_check_connection_and_unref_unlocked since we only call this
method on a locked connection.
Make sure we call _dbus_connection_unref_unlocked instead of
dbus_connection_unref also.
Handle DBUS_BUS_STARTER correctly
* dbus/dbus-connection.c (connection_record_shared_unlocked):
Mark as shared and hard ref the connection
(connection_forget_shared_unlocked): Remove the hard ref from the
connection
(_dbus_connection_close_internal_and_unlock): New internal function
which takes a locked connection and unlocks it after closing it
(_dbus_connection_close_internal): New internal function which acts
like the origonal dbus_connection_close method by grabbing a connection
lock and calling _dbus_connection_close_internal_and_unlock
(dbus_connection_close): Public close method, warns when the app
trys to close a shared connection
get the list of services that can be activated
* bus/dispatch.c: test coverage for the new bus method
ListActivatableNames
* bus/driver.c: new bus method ListActivatableNames to get the list of
services that can be activated
* doc/dbus-specification.xml: ListActivatableNames method documentation
function
(dbus_connection_dispatch): On disconnect unref any shared connections
* dbus/dbus-bus.c (_dbus_bus_check_connection_and_unref): new function
for cleaning up shared connections on disconnect
(internal_bus_get): get a hard refrence to shared connections when
they are created
* doc/TODO: Remove items which are no longer relevent or have been fixed
Split 1.0 todo items with a 0.90 freeze todo list
* dbus/bus.c (dbus_bus_add_match): Add documentation
* doc/dbus-specification.xml: Add documentation for the match rules
and the AddMatch and RemoveMatch methods
Makefile list
* dbus/dbus-shared.h (#define DBUS_NAME_FLAG_ALLOW_REPLACEMENT):
New flag which replaces DBUS_NAME_FLAG_PROHIBIT_REPLACEMENT
(#define DBUS_NAME_FLAG_DO_NOT_QUEUE): New flag for specifying
not to queue an ower if it can't be the primary owner
* bus/bus.h: Add new internal BusOwner struct
* bus/driver.c (bus_driver_handle_hello): Send flags (0 for default)
to bus_registry_ensure and don't set the prohibit_replacement flag
since they are now set per BusOwner and not per name.
(bus_driver_handle_list_queued_owners): bus method (ListQueuedOwners)
that returns the list of connections in a name's connection queue
* bus/services.c (struct BusService): remove prohibit_replacement field
(struct BusOwner): new struct for keeping track of queued connections
and their associated flags for the queue
(struct BusRegistry): add a BusOwner memory pool
(bus_registry_new): initialize the BusOwner memory pool
(bus_registry_unref): free the BusOwner memory pool
(_bus_service_find_owner_link): new internal method for
searching the queue for a specific connection
(bus_owner_set_flags): new method for adding setting the flags on a
bus owner
(bus_owner_new): new method that creates a BusOwner object from the
pool and sets its flags
(bus_owner_ref, bus_owner_unref): ref counting for BusOwner objects
(bus_registry_ensure): Add the flags parameter
(bus_registry_acquire_service): Switch from using raw connections to
using the BusOwner struct
Add new state machine for dealing with the new set of flags
(bus_registry_set_service_context_table, struct OwnershipCancelData,
cancel_ownership, free_ownership_cancel_data,
add_cancel_ownership_to_transaction, struct OwnershipRestoreData,
restore_ownership, free_ownership_restore_data,
add_restore_ownership_to_transaction): Switch to using BusOwner
instead of raw connections
(bus_service_add_owner): Add flags parameter
Switch to using BusOwner instead of raw connections
Add state machine for dealing with the new set of flags
(bus_service_swap_owner): Swaps the first and second owners in the
queue. Used to make sure proper signals are sent when a service looses
or gains primary ownership. We never insert an owner at the top of the
queue. Instead we insert it in the second position and then swap.
(bus_service_remove_owner): Remove the owner from the queue sending
out the NameLost and NameOwnerChanged signals if the we were the
primary owner
(bus_service_get_primary_owners_connection): New method that extracts
the connection from the primary owner
(bus_service_get_primary_owner): Returns the BusOwner instead of the
connection
(bus_service_get_allow_replacement): Changed from the old
bus_service_get_prohibit_replacement method. Checks the flags of the
primary owner and returns if it can be replaced or not
(bus_service_set_prohibit_replacement): removed
(bus_service_has_owner): returns TRUE if and owner with
the specified connection exists in the queue
* dbus/dbus-bus.c (dbus_bus_connection_get_unique_name): New helper
method that only compiles if tests are enabled. Allows us to get the
unique name of a connection so we can check it against the queue when
doing regression tests
* bus/activation.c (bus_activation_send_pending_auto_activate),
bus/dispatch.c (bus_dispatch),
bus/driver.c (bus_driver_handle_get_service_owner,
bus_driver_handle_get_connection_unix_user,
bus_driver_handle_get_connection_unix_process_id,
bus_driver_handle_get_connection_selinux_security_context),
bus/signals.c (connection_is_primary_owner):
use bus_service_get_primary_owners_connection instead of
bus_service_get_primary_owner
* dbus/dbus-sysdeps.c (_dbus_connect_unix_socket,
_dbus_listen_unix_socket): Calculate the length of the socket
path and use that instead of using a fixed length which was
causing socket names to contain many trailing Nul bytes.
* dbus/dbus-glib-lowlevel.h, glib/dbus-gobject.c
(dbus_g_method_get_sender): New method for extracting the sender
from a DBusGMethodInvocation
(dbus_g_method_return_get_reply): changed name to
dbus_g_method_get_reply
(dbus_g_method_return_send_reply): changed name to
dbus_g_method_send reply
* doc/dbus-specification.xml: New docs that describe how the new
queueing system works and talks about the changes to the how
we specify socket names
* glib/examples/example-service.c,
glib/examples/example-signal-emitter.c,
glib/examples/statemachine/statemachine-server.c:
Changed the RequestName flags to the new system
* test/name-test/ (test-names.c, run-test.sh, Makefile.am): New
regression test suite for testing various states of the new
queueing system
* bus/driver.c, bus/services.c, bus/services.h: Add a ReleaseName
method to org.freedesktop.DBus to release a bus name or give up
waiting in the queue for it.
* dbus/dbus-bus.c, dbus/dbus-bus.h, dbus/dbus-shared.h: Add a
dbus_bus_release_name method to send the ReleaseName method calls.
Add constants for the return values to dbus/dbus-shared.h.
* doc/dbus-specification.xml: Document the new ReleaseName method
in the specification.
* python/dbus_bindings.pyx: Add a low-level python binding for the
release name method.
* python/exceptions.py, python/service.py: Make freeing BusName
objects release the name. Add a NameExistsException, and fix a
bug with creating UnknownMethodException.
* test/python/test-client.py: Add tests for freeing BusName
objects causing names to be released.
to the introspect data. (patch from Daniel P. Berrange
<dan at berrange.com>)
* bus/dispatch.c (check_existent_ping): Add testcase for Ping
* dbus/dbus-connection.c (_dbus_connection_peer_filter,
_dbus_connection_run_builtin_filters): Changed these to
be unlock_no_update functions and call
_dbus_connection_send_unlocked_no_update instead of
dbus_connection_send to avoid locking errors.
* doc/TODO: Removed the make Ping test TODO
* doc/introspect.xsl: New stylesheet for converting introspection data
into browser renderable xhtml. Contributed by Lennart Poettering.
* doc/introspect.dtd: Fixups in the introspect format from Lennart
Poettering.
* doc/dbus-tutorial.xml:
- Add Colin Walter to the Authors section for authoring the GLib
section
- Add descriptions of the new signature and type functionality
in the Python complex type mapping section
- Add a sidenote on the new args matching functionality in
the Python bindings
- Fixed up some of the examples to use the gobject.MainLoop
instead of gtk.main
* python/_dbus.py:
(Bus::_create_args_dict): New. Converts a hash of arg matches
to a more useable format
(Bus::add_signal_receiver): add a **keywords parameter for catching
arg match parameters
(Bus::remove_signal_receiver): add a **keywords parameter for catching
arg match parameters
* python/matchrules.py:
(MatchTree::exec_matches): Check for arg matches
(SignalMatchRule::add_args_match): New method
(SignalMatchRule::execute): Added args_list parameter as an optimization
so we don't have to marshal the args more than once
(SignalMatchRule::match_args_from_list): New method that checks to see
if the rule's arg matches match an argument list. Only arguments
set in the rule are checked.
(SignalMatchRule::match_args_from_rule): New method that checks to see
if the rule's arg matches match another rule's. All args have to match
in order for this method to return true. If either rule has more args
then it is not a match.
(SignalMatchRule::is_match): Add args match
(SignalMatchRule::repr): Add args to the final output if they exist
* bus/signals.c (bus_signals_test): add match_rule_equal() tests
(match_rule_matches): remove unused arg
(test_matching): add tests for match_rule_matches()
* bus/signals.c (bus_match_rule_parse_arg_match): add ability to
do arg0='foo' arg5='bar' in the match rules
(match_rule_matches): don't match if the arg0='foo' doesn't match.
* dbus/dbus-protocol.h (DBUS_MAXIMUM_MATCH_RULE_ARG_NUMBER): add this
for sending messages to oneself (TODO item).
* python/service.py (class Object): Swap ordering of bus_name
and object_path parameters to better support inheritance.
* doc/dbus-tutorial.xml: change Python docs to reflect change
in parameter ordering and fix the inheritance section.
* doc/TODO: remove sending message to oneself TODO item
don't add a callback to the match if none has been passed in
* python/matchrules.py (SignalMatchTree::remove): if the rule
being matched does not have a callback treat it as a wildcard
fix matching logic
* doc/dbus-tutorial.xml: Add Python tutorial
* python/dbus_bindings.pyx: Added.
- Fixed some memleaks (patch from
Sean Meiners <sean.meiners@linspireinc.com>)
- Broke out the #include "dbus_h_wrapper.h" and put it in its
own pxd file (Pyrex definition)
- Broke out glib dependancies into its own pyx module
* python/dbus_bindings.pdx: Added.
- Defines C class Connection for exporting to other modules
* python/dbus_glib_bindings.pyx: Added.
- New module to handle lowlevel dbus-glib mainloop integration
* python/glib.py: Added.
- Registers the glib mainloop when you import this module
* python/services.py: Removed (renamed to service.py)
* python/service.py: Added.
- (class Server): renamed Name
* python/__init__.py: Bump ro version (0,41,0)
- don't import the decorators or service module
by default. These now reside in the dbus.service namespace
* python/_dbus.py (Bus::__init__): Add code run the main loop
setup function on creation
* python/examples/example-service.py,
python/examples/example-signal-emitter.py: update examples
* python/examples/gconf-proxy-service.py,
python/examples/gconf-proxy-service2.py: TODO fix these up
* doc/TODO: Addition
- Added a Python Bindings 1.0 section
- added "Add match on args or match on details to match rules"
* doc/TODO: Knock off some GLib items with this patch.
* glib/dbus-gvalue-utils.c (_dbus_gtype_can_signal_error)
(_dbus_gvalue_signals_error): New functions.
* glib/dbus-gvalue-utils.h: Prototype them.
* glib/dbus-gobject.c (arg_iterate): Update to handle return vals
and change to not output const/retval flags for input args. All
callers updated.
(invoke_object_method): Refactor to handle return values. Add
some more comments in various places. Remove debug g_print.
* glib/dbus-binding-tool-glib.h (DBUS_GLIB_ANNOTATION_RETURNVAL): New.
* glib/dbus-binding-tool-glib.c (dbus_g_type_get_marshal_name):
Handle G_TYPE_NONE.
(compute_gsignature): New function; refactored from code from
compute_marshaller and compute_marshaller_name. Enhance to
handle return values and async ops more cleanly. Update for
async ops returning NONE instead of BOOLEAN.
(compute_marshaller, compute_marshaller_name): Call compute_gsignature
and output appropriate string.
(generate_glue): Handle return value annotation. Also don't dump
constness flag for input arguments.
* glib/Makefile.am (DBUS_GLIB_INTERNALS): New variable; contains
files shared between installed library and utilities.
(libdbus_glib_1_la_SOURCES): Move some stuf into DBUS_GLIB_INTERNALS.
(libdbus_gtool_la_SOURCES): Suck in DBUS_GLIB_INTERNALS so the
binding tool can access gtype utility functions.
* test/glib/test-service-glib.c:
* test/glib/test-service-glib.xml:
* test/glib/test-dbus-glib.c: Add some tests for return values.
* glib/dbus-glib.c (dbus_set_g_error): Delete.
(dbus_g_error_set): New public function from its ashes; used by
both service-side method implementation and GLib bindings
internals.
(dbus_g_error_has_name, dbus_g_error_get_name): New function.
(_dbus_glib_test): Add some tests.
* test/glib/test-dbus-glib.c (main): Test dbus_g_error_has_name.
* test/glib/test-service-glib.c (my_object_throw_error): Use
dbus_g_error_set.
* glib/dbus-gobject.c (gerror_to_dbus_error_message): Handle
errors thrown by dbus_g_error_set.
* glib/dbus-gmain.c (dbus_g_bus_get): Change to dbus_g_error_set.
* glib/dbus-gparser.c (validate_signature): Ditto.
* glib/dbus-gproxy.c (dbus_g_proxy_new_for_name_owner)
(dbus_g_proxy_end_call_internal): Ditto.
* glib/Makefile.am: Generate dbus-glib-error-switch.h, which
converts DBUS_ERROR_x to DBUS_GERROR_x.
(libdbus_glib_1_la_SOURCES, BUILT_SOURCES, CLEANFILES): Add it.
* doc/TODO: Remove error TODO.
* doc/dbus-tutorial.xml: Update with documentation about error
handling.
* dbus/make-dbus-glib-error-enum.sh: Tighten up regexp to make
sure we only change DBUS_ERROR to DBUS_GERROR, not all ERROR to
GERROR. Also add DBUS_GERROR_REMOTE_EXCEPTION.
* glib/dbus-gproxy.c (dbus_g_proxy_emit_remote_signal): Don't
spew warnings if we get malformed remote signals.
* glib/dbus-gobject.c (propsig_iterate): New function.
(lookup_object_info): New function, extracted from
lookup_object_and_method.
(introspect_properties, introspect_signals): Delete; these
are merged into write_interface.
(write_interface): Write out signals and properties here;
dump the org.gtk.object stuff and use the interface given
in the introspection data blob. Also fix up property XML.
(lookup_values): New function.
(introspect_interfaces): Gather a mapping from interface to a
list of its methods, signals, and properties, then write out
each interface.
(lookup_object_and_method): Use lookup_object_info.
(struct DBusGSignalClosure): Add interface.
(dbus_g_signal_closure_new): Add interface. Don't dup signame;
we can just use the constant data.
(dbus_g_signal_closure_finalize): Don't free signal name.
(signal_emitter_marshaller): Use interface from signal closure.
(export_signals): Only export signals mentioned in introspection
blob.
(dbus_g_connection_register_g_object): Warn if we have no
introspection data for an object.
(funcsig_equal): Remove unused variable.
(dbus_g_object_register_marshaller): Take varargs instead of
list.
(dbus_g_object_register_marshaller_array): New function,
extracted from old dbus_g_object_register_marshaller.
* glib/dbus-binding-tool-glib.c (struct DBusBindingToolCData): Add
signals and property data.
(write_quoted_string): New function, extracted from generate_glue.
(generate_glue): Write signals and properties to introspection
blob.
* dbus/dbus-glib.h (struct DBusGObjectInfo): Include
exported_signals and exported_properties.
(dbus_g_object_register_marshaller): Update prototype.
(dbus_g_object_register_marshaller_array): Prototype.
* test/glib/test-dbus-glib.c: Extend testing to cover new signals.
* test/glib/test-service-glib.c: Add new test signals and method
to emit them.
* test/glib/test-service-glib.xml: Add some test signals.
* test/glib/Makefile.am (BUILT_SOURCES): Add my-object-marshal.c
and my-object-marshal.h
(test_service_glib_SOURCES, test_dbus_glib_SOURCES): Add
my-object-marshal.c.
(my-object-marshal.c, my-object-marshal.h): Implement.
* test/glib/.cvsignore: Update.
* doc/TODO: Remove two GLib TODO items fixed by this
patch.
(_dbus_connection_run_builtin_filters): New method
(dbus_connection_dispatch): Run the builtin filters which in turn
runs the peer filter which handles Ping messages.
* doc/TODO:
- Ping isn't handled: This patch fixes it
- Add a test case for the Ping message: added TODO item
(dbus_message_has_path): New method
(dbus_message_has_interface): New method
(dbus_message_has_member): New method
* dbus/dbus/dbus-sysdeps.c (_dbus_check_dir_is_private_to_user):
New method
* dbus/dbus-keyring.c (_dbus_keyring_reload): Check to see that
the keyring directory is private to the user
* doc/TODO:
- The convenience functions in dbus-bus.h should perhaps have
the signatures that they would have if they were autogenerated
stubs. e.g. the acquire service function. We should also evaluate
which of these functions to include, in light of the fact that
GLib/Qt native stubs will probably also exist.: Punted
- add dbus_message_has_path(), maybe has_member/interface:
fixed in this patch
- in dbus-keyring.c, enforce that the keyring dir is not
world readable/writable: Fixed in this patch
error code DBUS_VALIDITY_UNKNOWN_OOM_ERROR = -4 for
out of memory errors when validating signitures
* dbus/dbus-marshal-header.c: use DBUS_VALIDITY_UNKNOWN_OOM_ERROR
in places where we previously used DBUS_VALID and a FALSE return
value to indicate OOM
* dbus/dbus-marshal-validate.c (_dbus_validate_signature_with_reason):
Use a stack to track the number of elements inside containers. The
stack values are then used to validate that dict entries have only two
elements within them.
(validate_body_helper): check the reason for failure when validating
varients
* dbus/dbus-message.c (load_message): use
DBUS_VALIDITY_UNKNOWN_OOM_ERROR in places where we previously used
DBUS_VALID and a FALSE return value to indicate OOM
* doc/TODO: remove "- validate dict entry number of fields" as this
patch fixes it
Async signals and various bugfixes and testing by
Ross Burton <ross@burtonini.com>.
* glib/dbus-gvalue.h: (struct DBusBasicGValue): Delete.
(dbus_gvalue_genmarshal_name_from_type)
(dbus_gvalue_ctype_from_type): Moved to dbus-binding-tool-glib.c.
(dbus_gtype_to_dbus_type): Renamed to dbus_gtype_from_signature.
(dbus_g_value_types_init, dbus_gtype_from_signature)
(dbus_gtype_from_signature_iter, dbus_gtype_to_signature)
(dbus_gtypes_from_arg_signature): New function prototypes.
(dbus_gvalue_demarshal): Take context and error arguments.
(dbus_gvalue_demarshal_variant): New function.
(dbus_gvalue_demarshal_message): New function.
(dbus_gvalue_store): Delete.
* glib/dbus-gvalue.c:
File has been almost entirely rewritten; now we special-case
more types such as DBUS_TYPE_SIGNATURE, handle arrays and
hash tables correctly, etc. Full support for recursive values
is not yet complete.
* glib/dbus-gproxy.c (dbus_g_proxy_class_init): Change last
argument of signal to G_TYPE_POINTER since we now pass a
structure.
(lookup_g_marshaller): Delete in favor of
_dbus_gobject_lookup_marshaller.
(marshal_dbus_message_to_g_marshaller): Use
_dbus_gobject_lookup_marshaller and dbus_gvalue_demarshal_message
to handle remote signal callbacks.
(dbus_g_proxy_new_from_proxy): New function; creates a new
DBusGProxy by copying an existing one.
(dbus_g_proxy_get_interface, dbus_g_proxy_set_interface)
(dbus_g_proxy_get_path): New functions.
(dbus_g_proxy_marshal_args_to_message): New function;
factored out of existing code.
(DBUS_G_VALUE_ARRAY_COLLECT_ALL): Collect all arguments
from a varargs array.
(dbus_g_proxy_begin_call_internal): New function.
(dbus_g_proxy_end_call_internal): New function.
(dbus_g_proxy_begin_call): Take GTypes instead of DBus types
as arguments; simply invoke dbus_g_proxy_begin_call_internal
after collecting args into value array.
(dbus_g_proxy_end_call): Take GTypes instead of DBus types;
invoke dbus_g_proxy_end_call_internal.
(dbus_g_proxy_invoke): Simply invoke begin_call_interanl and
end_call_internal.
(dbus_g_proxy_call_no_reply): Take GTypes instead of DBus
types.
(array_free_all): New function.
(dbus_g_proxy_add_signal): Take GTypes.
* glib/dbus-gobject.h:
(_dbus_glib_marshal_dbus_message_to_gvalue_array): Delete.
(_dbus_gobject_get_path, _dbus_gobject_lookup_marshaller):
Prototype.
* glib/dbus-gobject.c: Add a global marshal_table hash which
stores mappings from type signatures to marshallers. Change lots
of invocations of dbus_gtype_to_dbus_type to
dbus_gtype_to_signature.
(_dbus_glib_marshal_dbus_message_to_gvalue_array): Delete.
(introspect_signals): Fix test for query.return_type.
(set_object_property): Update invocation of dbus_gvalue_demarshal.
(invoke_object_method): Many changes. Handle asynchronous
invocations. Convert arguments with
dbus_gvalue_demarshal_message. Handle errors. Use
DBusSignatureIter instead of strlen on args. Handle all arguments
generically. Special-case variants.
(dbus_g_method_return, dbus_g_method_return_error): New function.
(DBusGSignalClosure): New structure, closes over signal
information.
(dbus_g_signal_closure_new): New function.
(dbus_g_signal_closure_finalize): New function.
(signal_emitter_marshaller): New function; is special marshaller
which emits signals on bus.
(export_signals): New function; introspects object signals and
connects to them.
(dbus_g_object_type_install_info): Take GType instead of
GObjectClass.
(dbus_g_connection_register_g_object): Invoke export_signals.
(dbus_g_connection_lookup_g_object): New function.
(DBusGFuncSignature) New structure; used for mapping type
signatures to marshallers.
(funcsig_hash): New function; hashes DBusGFuncSignature.
(funcsig_equal): New function; compares DBusGFuncSignature.
(_dbus_gobject_lookup_marshaller): New function.
(dbus_g_object_register_marshaller): New function; used to
register a marshaller at runtime for a particular signature.
* glib/dbus-gmain.c (_dbus_gmain_test): Add various tests.
* glib/dbus-binding-tool-glib.h: Add DBUS_GLIB_ANNOTATION_ASYNC
which notes a server method implementation should be
asynchronous.
* glib/dbus-binding-tool-glib.c
(dbus_binding_tool_output_glib_server): Call
dbus_g_value_types_init.
(write_formal_parameters): Use dbus_gtype_from_signature. Handle
variants specially.
(dbus_g_type_get_lookup_function): Turn GType into an invocation
of a lookup function.
(write_args_for_direction): Use dbus_g_type_get_lookup_function.
(write_untyped_out_args): New method; write output arguments.
(write_formal_declarations_for_direction): Function for
writing prototypes.
(write_formal_parameters_for_direction): Function for
writing implementations.
(write_typed_args_for_direction): Function for writing
arguments prefixed with GTypes.
(write_async_method_client): Write out async version
of method.
* glib/dbus-binding-tool-glib.c: Include dbus-gvalue-utils.h.
(dbus_g_type_get_marshal_name): Move mapping from GType
to marshal name into here.
(dbus_g_type_get_c_name): Move into here.
(compute_marshaller): Convert signature to type with
dbus_gtype_from_signature, use dbus_g_type_get_marshal_name.
(compute_marshaller_name): Ditto.
(compute_marshaller): Handle async signal annotations.
(gather_marshallers): Return if we don't have a known
prefix.
(generate_glue): Collect introspection blob here, and
write all of the blob at the end. This allows an object
with multiple interfaces to work.
Mark async methods in introspection blob.
* glib/Makefile.am (libdbus_glib_1_la_SOURCES): Add
dbus-gtype-specialized.c, dbus-gtype-specialized.h,
dbus-gvalue-utils.h, dbus-gvalue-utils.c.
* dbus/dbus-glib.h: Don't include dbus-protocol.h; this
avoids people accidentally using DBUS_TYPE_* which should
not be necessary anymore.
Do include dbus-gtype-specialized.h, which are utilities
for GLib container types.
Add various #defines for types such as
DBUS_TYPE_G_BOOLEAN_ARRAY.
(DBusGValueIterator, DBusGValue): Define, not fully used
yet.
(dbus_g_value_get_g_type): Type for recursive value.
(dbus_g_value_open, dbus_g_value_iterator_get_value)
(dbus_g_value_iterator_get_values, dbus_g_value_iterator_recurse)
(dbus_g_value_free): Prototypes.
(dbus_g_object_register_marshaller, dbus_g_proxy_new_from_proxy): Prototype.
(dbus_g_proxy_set_interface): Prototype.
(dbus_g_proxy_begin_call, dbus_g_proxy_end_call)
(dbus_g_proxy_call_no_reply): Take GLib types instead of DBus
types.
(dbus_g_proxy_get_path, dbus_g_proxy_get_interface):
Accessors.
(DBusGAsyncData, DBusGMethodInvocation): Structures for
doing async invocations.
(dbus_g_method_return, dbus_g_method_return_error):
Prototypes.
* doc/dbus-tutorial.xml: Update GLib section.
* tools/dbus-viewer.c (load_child_nodes): Update
for new invocation type of dbus_g_proxy_end_call.
(load_from_service_thread_func): Ditto.
* tools/print-introspect.c (main): Ditto.
* tools/dbus-names-model.c (have_names_notify)
(names_model_reload, names_model_set_connection)
Use GTypes.
* python/Makefile.am (INCLUDES): Define DBUS_COMPILATION,
needed since Python bindings use GLib bindings.
* test/glib/Makefile.am (INCLUDES): Define DBUS_COMPILATION.
Add --prefix argument.
* tools/Makefile.am: Define DBUS_COMPILATION. Remove
unneeded --ignore-unsupported arg.
* test/glib/test-service-glib.c:
* test/glib/test-service-glib.xml:
* test/glib/test-dbus-glib.c: Add many more tests.
* doc/TODO: Add item about need to remove deprecated functions.
* dbus/dbus-connection.h: Add prototype for dbus_connection_disconnect
* dbus/dbus-connection.c (dbus_connection_disconnect): New function
to repair the ABI which was broken with the last commit.
* configure.in (LT_*): add notes on how the libtool versioning
works to save thinking. Increment soname to indicate protocol
breakage (though really the library interface hasn't changed I
guess)
* dbus/dbus-transport.c (_dbus_transport_get_is_authenticated):
verify the GUID received from server matches what we were
expecting, if we had an expectation
* dbus/dbus-auth.c (send_ok): send GUID along with the OK command
(_dbus_auth_get_guid_from_server): new function
(send_begin): parse the OK args
* doc/dbus-specification.xml: add GUID to the auth protocol
* doc/TODO: remove the "guid" item
* test/glib/test-profile.c (no_bus_thread_func): use open_private
(with_bus_thread_func): use open_private
* dbus/dbus-connection.c (dbus_connection_open_private): new
function that works like the old dbus_connection_open()
(dbus_connection_open): now returns an existing connection if
possible
* dbus/dbus-server-unix.c (handle_new_client_fd_and_unlock): pass
through the GUID to the transport
* dbus/dbus-server.c (_dbus_server_init_base): keep around the
GUID in hex-encoded form.
* dbus/dbus-server-debug-pipe.c (_dbus_transport_debug_pipe_new):
pass GUID argument in to the transport
* dbus/dbus-transport-unix.c (_dbus_transport_new_for_fd): add
guid argument
* dbus/dbus-transport.c (_dbus_transport_init_base): add guid argument
* dbus/dbus-auth.c (_dbus_auth_server_new): add guid argument
