* examples/python/NetworkManager.py:
added CONNECTED, CONNECTING, and DISCONNECTED states
added methods to return number of devices of a single type
* examples/python/systray/network_tray.py:
did some tweaks to get the menu looking near what it is supposed
to look like. Also did a Airo card hack to make it show the
correct AP quality
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@134 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/no-networkmanager.png
panel-applet/Makefile.am
panel-applet/NMWirelessApplet.c
- Add a "NetworkManager not running" icon and use it
- Use new consolidated GConf keys rather than Preferred/Trusted
* TODO: update
* info-daemon/NetworkManagerInfo.c
info-daemon/NetworkManagerInfoDbus.[ch]
info-daemon/NetworkManagerInfoPassphraseDialog.c
- There are now no longer two separate lists of wireless networks,
but one list where each network is "trusted" or not trusted
- Add a "getNetworkTrusted" dbus method
- "WirelessNetworkUpdate" signal now sent rather than
"PreferredNetworkUpdate/TrustedNetworkUpdate" signals
- Start freeing some dbus errors (not completed yet)
* info-daemon/passphrase.glade
- Remove the "don't show" hints for pager and taskbar
- Add a title since its going to be in the taskbar
* src/NetworkManager.[ch]
src/NetworkManagerAPList.[ch]
- There are now no longer two separate lists of wireless networks,
but one list where each network is "trusted" or not trusted
* src/NetworkManagerAP.[ch]
- Add get/set "trusted" accessors and data bit
* src/NetworkManagerDbus.[ch]
- Add function to get "trusted" status of a network from NetworkManagerInfo
- Trap new WirelessNetworkUpdate signal rather than old separate signals
* src/NetworkManagerDevice.[ch]
- Add per-device config data (ip4 addr, gateway, netmask) and accessors
- (nm_device_new): Get device config from backend when initializing devices
- (nm_device_activation_worker): Split out device configuration on
activation to deal with static/dynamic IP differences, and try encryption
fallbacks on a device if the encryption method for the best AP is not good
- (nm_device_update_best_ap): convert to new consolidated access point lists from
NetworkManagerInfo, and copy over latest NMI info to best_ap when setting it
* src/NetworkManagerWireless.c
- libgcrypt code wasn't converting the MD5 digest to an ascii string, fix it
* src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerSystem.h
- (nm_system_device_update_config_info): Add function to get device configuration
from system data in ifcfg-* files
* src/backends/NetworkManagerDebian.c
src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerSlackware.c
- Add stub functions for getting device configuration
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@131 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patches below from:
<j@bootlab.org>
Mark Roach <mrroach@okmaybe.com>
Thom May <thom@debian.org>
* configure.in
initscript/Debian/NetworkManager
initscript/Debian/Makefile.am
- Initscript for Debian
* src/backends/NetworkManagerDebian.c
- Add missing system init function to allow compilation
on Debian
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@125 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* examples/python/NetworkManager.py:
added convience functions has_wired_device and has_wireless_device
* examples/python/systray/network_tray.py:
cleaned up a bunch of cruft, added support for listing wireless
networks just like the real applet. This is probably all I'm
going to work on this applet from now on.
TODO: add support for actually changing networks and devices
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@111 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* examples/python/NetworkManager.py (NetworkManager.get_device):
changed "nm.networks" into a dict from a list so I can store all
the cool information about networks in there
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@109 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* examples/python/NetworkManager.py:
Bug fixes to the code so we get all the device information
that we need in get_device()
* examples/python/NMTester.py:
Fixed _print_device_list to print_device_list
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@107 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDbus.c (nm_dbus_get_network_timestamp): Return
a GTimeVal instead of time_t. This is easier to work with,
since time_t may be a long or double, we don't know.
* src/NetworkManagerDbus.h: Update prototype.
* src/NetworkManagerAP.c (struct NMAccessPoint): Store a GTimeVal
instead of time_t.
(nm_ap_get_timestamp): Update to return GTimeVal.
(nm_ap_set_timestamp): Update to take GTimeVal.
* src/NetworkManagerDevice.c (nm_device_update_best_ap): Update
to handle GTimeVal.
* src/NetworkManagerAPList.c (nm_ap_list_update_network): Handle
GTimeVal change.
(nm_ap_list_print_members): Fix warnings in printf format.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@104 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDbus.c (nm_dbus_get_network_timestamp): Return
a GTimeVal instead of time_t. This is easier to work with,
since time_t may be a long or double, we don't know.
* src/NetworkManagerDbus.h: Update prototype.
* src/NetworkManagerAP.c (struct NMAccessPoint): Store a GTimeVal
instead of time_t.
(nm_ap_get_timestamp): Update to return GTimeVal.
(nm_ap_set_timestamp): Update to take GTimeVal.
* src/NetworkManagerAPList.c (nm_ap_list_update_network): Handle
GTimeVal change.
(nm_ap_list_print_members): Fix warnings in printf format.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@103 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in: Generate config.h.
* configure.in: Dump dependency on OpenSSL; we can't
use it since this package is GPL:
http://www.gnome.org/~markmc/openssl-and-the-gpl.html
Instead, check for libgcrypt, use it if available,
otherwise use included MD5 code.
* src/gnome-keyring-md5.h, src/gnome-keyring-md5.c:
Suck in from gnome-keyring, munge a bit.
* src/Makefile.am (NetworkManager_SOURCES) <!WITH_GCRYPT>: Include
gnome-keyring-md5.h gnome-keyring-md5.c.
(NetworkManager_LDADD) <WITH_GCRYPT>: Add dep on LIBGCRYPT_LIBS.
* src/NetworkManagerWireless.c (nm_md5): New function, uses
libgcrypt or included gnome-keyring md5 bits.
(nm_wireless_128bit_key_from_passphrase): Use nm_md5.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@101 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.c
- Make current device bold
- Show more user-friendly device name if we got one from hal
* panel-applet/NMWirelessAppletDbus.c
- Grab "info.product" key from hal for network devices
- Cache the current active device
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@92 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.c
- Remove debugging code
- Enable device switching from menus
* panel-applet/NMWirelessAppletDbus.[ch]
- Method for asking NM to switch devices
* src/NetworkManagerDevice.c
- Set dev->activating earlier, avoids race between
the dbus signal of "DeviceActivating" and setting
dev->activating (which is what NM's "status" method call
looks at)
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@83 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.[ch]
- Rework menu code to add devices to menu, and to show
signal strength for each access point. Code cleanups
too.
* panel-applet/NMWirelessAppletDbus.c
- Grab network devices from NetworkManager too
- Grab quality information from NM for wireless networks
* src/NetworkManagerDbus.[ch]
- Add dbus methods for getting the HAL UDI from a device and
for getting its base quality, if its wireless
- Consolidate some functions (wireless network notifications,
device notifications)
- Add method for requesting NM to use a particular device
* src/NetworkManager.c
- Change for function consolidations from NetworkManagerDbus.c
- Implement active device locking and user-requested devices
(ie, tell NM to use a particular device instead of the one
it autochose)
* src/NetworkManagerDevice.c
- Add method for getting the base quality of a device, if its
wireless
- Grab device base quailty info from iwlib during scans
* src/NetworkManagerPolicy.c
- Use a user-requested device rather than the auto-chosen device
if we are told to
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@81 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
(nmwa_menu_item_activate), (nmwa_toplevel_menu_activate),
(nmwa_add_menu_item), (nmwa_menu_item_data_free),
(nmwa_dispose_menu_items), (nmwa_populate_menu),
(nmwa_setup_widgets), (do_not_eat_button_press), (nmwa_new):
* panel-applet/NMWirelessApplet.h:
Use a menu bar instead of a button for the main clickable
thingy.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@79 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.c
- (nm_device_set_enc_key): always set device to "open" mode instead of
turning encryption off, because the Cisco driver doesn't associate
with WEP-enabled access points unless we are in "open"
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@78 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.c
- (nmwa_udpate_state): Set panel icon to "wired" (for lack of better ones)
when NM isn't around or when its not connected
* src/NetworkManagerDevice.c
- (nm_device_activation_worker): Make sure to reset dev->activating if we get
canceled.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@73 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessAppletDbus.c
- (nmwa_dbus_get_bool, nmwa_dbus_get_network_encrypted): correct method name
for getting encryption, and don't stop on "val" once we've gotten it
from NetworkManager. Short form: encryption should now show up.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@72 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.c
- Set ESSID on a gconf trusted network too when force-setting the wireless
network to associate with
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@71 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManager.c
src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerSystem.h
- Implement preliminary Gentoo support, adding a
nm_system_init function to the backend specification
* configure.in
- Distribution auto-detection, lowercase any user-fed
distribution names
* initscript/.cvsignore
initscript/Makefile.am
initscript/RedHat/Makefile.am
initscript/RedHat/NetworkManager
initscript/Gentoo/Makefile.am
initscript/Gentoo/NetworkManager
- Refactored initscript code separately for each
distribution
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@64 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in
src/Makefile.am
src/NetworkManagerDevice.c
src/NetworkManager.c
src/NetworkManagerUtils.[ch]
src/backends/NetworkManagerSystem.h
src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerGentoo.c
- Refactor system-specific code into separate backends for
each distribution
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@62 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.c
- Update our state every second to get more responsive panel icon
- (nmwa_update_state): remove bogus applet->pix_state = PIX_WIRED that
was causing our marching ants status blips to never move when
looking for a wireless network
* src/NetworkManagerDevice.c
- (nm_device_activation_begin): return if activation has already begun
- (nm_device_do_normal_scan): merge WEP key and priority from the
trusted/preferred network into the device's access point when the
scan list is processed
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@60 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* initscript/NetworkManager
- Use NMLaunchHelper rather than sleeping
* initscript/NMLaunchHelper.c
Makefile.am
- Add helper program that exits only when NM activates a device,
or 10 seconds have passed, whichever happens first. This
stops the boot processes until we have a network connection,
which NM can't do because it daemonizes and brings the connection
up in the background. Allows stuff like NFS to not die.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@59 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfoPassphraseDialog.c
- (nmi_passphrase_dialog_ok_clicked): when updating the wep key
for a network, set the essid as well since it may not exist yet
- (nmi_passphrase_dialog_init): don't star out the passphrase field,
since WEP keys/passphrases are long and prone to entry-error
* panel-applet/Makefile.am
panel-applet/wired.png
- Add (pulled from system-config-network temporarily)
* panel-applet/NMWirelessApplet.[ch]
- Show wired picture when a wired connection is used
- Rename wireless icon enums, adding WIRELESS
* src/NetworkManagerDevice.c
- (nm_device_activate_wireless): unset encryption before bringing
down the card and setting the essid
- (nm_device_activatin_worker): request a key from the user if the
AP we are connecting to is encrypted but we don't have a key
for it yet
- (nm_device_set_user_key_for_network): fix missing '== 0' for a
strcmp() that prevented a user-entered key from actually getting
used
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@58 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* initscript/NetworkManager
- Check for /sbin/ip
- Do sysctl magic that network service does
- sleep 4s after start to allow network time to come up [hack]
* src/Makefile.am
src/NMLoadModules
- Load all network device kernel modules (hal doesn't know devices
are ethernet until the module is loaded, and therefore we don't know)
* src/NetworkManager.c
- (main): daemonize later, launch NMLoadModules to alert HAL of our
network devices, and bring up the loopback device explicitly
* src/NetworkManagerUtils.[ch]
- (nm_enable_loopback): new function
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@55 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
