We now also use a similar function in VPN plugins. It makes
sense to provide a generic implementation in libnm.
Signed-off-by: Thomas Haller <thaller@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=740783
Instead of having NmtEditorPage be a widget itself, have it just be an
object that returns a list of NmtEditorSections, where
NmtEditorSection is a subclass of NmtNewtSection.
(This will be important when adding VPN pages, which will be split up
into multiple sections, but with the different sections needing to
cooperate on updating the NMSettingVpn. This reorganization lets us
have an NMPageVpn containing multiple sections, with the NMPageVpn
object handling the coordination between the sections.)
All page types except NmtPageMain are displayed as collapsible
sections. NmtPageMain behaved quite differently from everything else.
So merge it into its container, NmtEditor.
Add contrib/fedora/rpm/ directory to POTFILES.skip.
Otherwise, after building an RPM, make check would fail
due to the source files from the rpmbuild.
Signed-off-by: Thomas Haller <thaller@redhat.com>
When quitting, the Manager asks each device to spawn the interface helper,
which persists and manages dynamic address on the interface after NetworkManager
is gone. If the dynamic address cannot be maintaned, the helper quits and
the interface's address may be removed when their lifetime runs out.
To keep the helper as simple as possible, NetworkManager passes most of the
configuration on the command-line, including some properties of the device's
current state, which are necessary for the helper to maintain DHCP leases
or IPv6 SLAAC addresses.
Split a base NMSettingIPConfig class out of NMSettingIP4Config and
NMSettingIP6Config, and update things accordingly.
Further simplifications of now-redundant IPv4-vs-IPv6 code are
possible, and should happen in the future.
Synopsis:
nmcli agent { secret | polkit | all }
The command runs separate NetworkManager secret agent or session polkit agent, or both.
It is useful when
- no other secret agent is available (such as GUI nm-applet, gnome-shell, KDE applet)
- no other polkit agent is available (such as polkit-gnome-authentication-agent-1,
polkit-kde-authentication-agent-1 or lxpolkit)
https://bugzilla.gnome.org/show_bug.cgi?id=739568
Consolidate NMClientError and NMObjectError (such that there is now
only one libnm-API-specific error domain). In particular, merge
NM_CONNECTION_ERROR_CONNECTION_REMOVED with
NM_OBJECT_ERROR_OBJECT_CREATION_FAILURE as the new
NM_CONNECTION_ERROR_OBJECT_CREATION_FAILED.
Also make object_creation_failed() be a plain method rather than a
signal, since there's no reason for anyone to be connecting to it on
another object. And remove its GError argument because the subclass
can just create its own more-specific error.
As with the settings, each device type was defining its own error
type, containing either redundant or non-useful error codes. Drop all
of the subtype-specific errors, and reduce things to just
NM_DEVICE_ERROR_FAILED, NM_DEVICE_ERROR_INCOMPATIBLE_CONNECTION, and
NM_DEVICE_ERROR_INVALID_CONNECTION.
The device-type-specific errors were only returned from their
nm_device_connection_compatible() implementations, so this is also a
good opportunity to simplify those, by moving duplicated functionality
into the base NMDevice implementation, and then allowing the
subclasses to assume that the connection has already been validated in
their own code. Most of the implementations now just check that the
connection has the correct type for the device (which can't be done at
the NMDevice level since some device types (eg, Ethernet) support
multiple connection types.)
Also, make sure that all of the error messages are localized.
Each setting type was defining its own error type, but most of them
had exactly the same three errors ("unknown", "missing property", and
"invalid property"), and none of the other values was of much use
programmatically anyway.
So, this commit merges NMSettingError, NMSettingAdslError, etc, all
into NMConnectionError. (The reason for merging into NMConnectionError
rather than NMSettingError is that we also already have
"NMSettingsError", for errors related to the settings service, so
"NMConnectionError" is a less-confusable name for settings/connection
errors than "NMSettingError".)
Also, make sure that all of the affected error messages are localized,
and (where appropriate) prefix them with the relevant property name.
Renamed error codes:
NM_SETTING_ERROR_PROPERTY_NOT_FOUND -> NM_CONNECTION_ERROR_PROPERTY_NOT_FOUND
NM_SETTING_ERROR_PROPERTY_NOT_SECRET -> NM_CONNECTION_ERROR_PROPERTY_NOT_SECRET
Remapped error codes:
NM_SETTING_*_ERROR_MISSING_PROPERTY -> NM_CONNECTION_ERROR_MISSING_PROPERTY
NM_SETTING_*_ERROR_INVALID_PROPERTY -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_ERROR_PROPERTY_TYPE_MISMATCH -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_BLUETOOTH_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_INVALID_SETTING
NM_SETTING_BOND_ERROR_INVALID_OPTION -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_BOND_ERROR_MISSING_OPTION -> NM_CONNECTION_ERROR_MISSING_PROPERTY
NM_SETTING_CONNECTION_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING
NM_SETTING_CONNECTION_ERROR_SLAVE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING
NM_SETTING_IP4_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_IP6_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_VLAN_ERROR_INVALID_PARENT -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_WIRELESS_SECURITY_ERROR_MISSING_802_1X_SETTING -> NM_CONNECTION_ERROR_MISSING_SETTING
NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_802_1X -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_USERNAME -> NM_CONNECTION_ERROR_MISSING_PROPERTY
NM_SETTING_WIRELESS_SECURITY_ERROR_SHARED_KEY_REQUIRES_WEP -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_WIRELESS_ERROR_CHANNEL_REQUIRES_BAND -> NM_CONNECTION_ERROR_MISSING_PROPERTY
Dropped error codes (were previously defined but unused):
NM_SETTING_CDMA_ERROR_MISSING_SERIAL_SETTING
NM_SETTING_CONNECTION_ERROR_IP_CONFIG_NOT_ALLOWED
NM_SETTING_GSM_ERROR_MISSING_SERIAL_SETTING
NM_SETTING_PPP_ERROR_REQUIRE_MPPE_NOT_ALLOWED
NM_SETTING_PPPOE_ERROR_MISSING_PPP_SETTING
NM_SETTING_SERIAL_ERROR_MISSING_PPP_SETTING
NM_SETTING_WIRELESS_ERROR_MISSING_SECURITY_SETTING
Instead of creating it in NMSettings, where we must use
NM_IS_DEVICE_ETHERNET() (not NM_DEVICE_TYPE_ETHERNET because various generic
devices masquerade as NM_DEVICE_TYPE_ETHERNET too), push knowledge
of which device types create default wired connections into the device
types themselves. This solves a problem with testcases where
libNetworkManager.a (which testcases link to) requires the symbol
nm_type_device_ethernet().
Instead of handling iBFT (iSCSI Boot Firmware Table) in the ifcfg-rh plugin,
create a new plugin for it. This allows all distributions to use iBFT
configuration, and makes both iBFT handling and ifcfg-rh less complicated.
The plugin (like the old ifcfg-rh code) creates read-only connections backed
by the data exported by iscsiadm. The plugin does not support adding new
connections or modifying existing connections (since the iBFT data is
read-only anyway). Instead, users should change their iBFT data through
the normal firmware interfaces.
Unmanaged devices can be configured through NetworkManager.conf and the
normal 'keyfile' mechanisms.
(In the future, we'll read this data directly from the kernel's
/sys/firmware/ibft/ethernetX directory instead of iscsiadm, since the
kernel has all the information we need and that's where iscsiadm gets
it from anyway.)
https://bugzilla.gnome.org/show_bug.cgi?id=734009
For NMDeviceWifi and NMDeviceWimax, the printf format string for
nm_utils_complete_generic() was created based on ssid/nsp. Since
these input strings are untrusted, this is a serious bug.
Signed-off-by: Thomas Haller <thaller@redhat.com>
