If the user explicitly passes --with-netconfig=$PATH or --with-resolvconf=$PATH,
the path is accepted as is. We only do autodetection, if the binary was not found.
In that case, if the binary cannot be found in the common paths fail compilation.
(cherry picked from commit 5b36585a3d)
Some path variable like $(bindir), $(datadir), etc. are special for
autotools and must be handled separately through config-extra.h.
But dhcp path variables are just normal variables defined through
the configure script and should go into config.h.
(cherry picked from commit 087c367d62)
dhcpcd version 6, the first supporting IPv6, was released more than 5
years ago. Remove all checks on version number and IPv6 support.
(cherry picked from commit e0c49d7341)
Handle the iptables, dnsmasq and dnssec-trigger paths in the same way
through common code.
The path set by user must be accepted as is, even if does not exist,
because this is a requirement for cross-compilation. When user does
not specify a path, search a predefined set of paths and fall back to
an hardcoded one.
(cherry picked from commit 220dea0948)
A few components are still disabled. Most notably, team support
which is not available on Ubuntu 14.04 (trusty).
All other components which are disabled are bugs in our build tools.
It should be possible to enable them, but currently breaks on travis.
Those needs additional fixes.
In particular, the DHCP plugins and ifcfg-rh plugin with meson.
Also, netconfig plugin with autotools requires that the path exists.
(cherry picked from commit e893405927)
Rename variables for the error number. Commonly the naming
is:
- errno: the error number from <errno.h> itself
- errsv: a copy of errno
- nlerr: a netlink error number
- err: an error code, but not a errno/errsv and not
a netlink error number.
(cherry picked from commit f4de941d98)
Internal DHCPv4 client requires a valid MAC address for functioning.
Just always require a MAC address to start DHCP, both v4 and v6.
We have no MAC address for example on Layer3 devices like tun or wireguard.
Also, before "0a797bdc2a systemd/dhcp: fix assertion starting DHCP
client without MAC address", if we tired to start sd_dhcp_client without
setting a MAC address, an assertion was triggered.
(cherry picked from commit e8fa75ce06)
An assertion in dhcp_network_bind_raw_socket() is triggered when
starting an sd_dhcp_client without setting setting a MAC address
first.
- sd_dhcp_client_start()
- client_start()
- client_start_delayed()
- dhcp_network_bind_raw_socket()
In that case, the arp-type and MAC address is still unset. Note that
dhcp_network_bind_raw_socket() already checks for a valid arp-type
and MAC address below, so we should just gracefully return -EINVAL.
Maybe sd_dhcp_client_start() should fail earlier when starting without
MAC address. But the failure here will be correctly propagated and
the start aborted.
See-also: https://github.com/systemd/systemd/pull/10054
(cherry picked from commit 34af574d58)
It's enough that all code paths in impl_ppp_manager_set_ifindex() log exactly
one message. Also, give all messages the same prefix, so that it's clear where
they come from.
(cherry picked from commit 2a45c32e8c)
In src/ppp/nm-pppd-plugin.c, it seems that pppd can invoke
phasechange(PHASE_RUNNING:) multiple times. Hence, the plugin
calls SetIfindex multiple times too. In nm-ppp-manager.c, we
want to make sure that the ifindex does not change after it
was set once. However, calling SetIfindex with the same ifindex
is not something worth warning. Just log a debug message and nothing.
Maybe the plugin should remember that it already set the ifindex,
and avoid multiple D-Bus calls. But it's unclear that that is desired.
For now, just downgrade the warning.
(cherry picked from commit 4a4439835d)
When unplugging an USB 3G modem device, pppd does not exit correctly and
we have the following traces:
Sep 10 07:58:24.616465 ModemManager[1158]: <info> (tty/ttyUSB0): released by device '/sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/usb4/4-1'
Sep 10 07:58:24.620314 pppd[2292]: Modem hangup
Sep 10 07:58:24.621368 ModemManager[1158]: <info> (tty/ttyUSB1): released by device '/sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/usb4/4-1'
Sep 10 07:58:24.621835 ModemManager[1158]: <warn> (ttyUSB1): could not re-acquire serial port lock: (5) Input/output error
Sep 10 07:58:24.621358 NetworkManager[1871]: <debug> ppp-manager: set-ifindex 4
Sep 10 07:58:24.621369 NetworkManager[1871]: <warn> ppp-manager: can't change the ifindex from 4 to 4
Sep 10 07:58:24.623982 NetworkManager[1871]: <info> device (ttyUSB0): state change: activated -> unmanaged (reason 'removed', sys-iface-state: 'removed')
Sep 10 07:58:24.624411 NetworkManager[1871]: <debug> kill child process 'pppd' (2292): wait for process to terminate after sending SIGTERM (15) (send SIGKILL in 1500 milliseconds)...
Sep 10 07:58:24.624440 NetworkManager[1871]: <debug> modem-broadband[ttyUSB0]: notifying ModemManager about the modem disconnection
Sep 10 07:58:24.626591 NetworkManager[1871]: <debug> modem-broadband[ttyUSB0]: notifying ModemManager about the modem disconnection
Sep 10 07:58:24.681016 NetworkManager[1871]: <warn> modem-broadband[ttyUSB0]: failed to disconnect modem: GDBus.Error:org.freedesktop.DBus.Error.UnknownMethod: No such interface 'org.freedesktop.ModemManager1.Modem.Simple' on object at path /org/freedesktop/ModemManager1/Modem/0
Sep 10 07:58:26.126817 NetworkManager[1871]: <debug> kill child process 'pppd' (2292): process not terminated after 1502368 usec. Sending SIGKILL signal
Sep 10 07:58:26.128121 NetworkManager[1871]: <info> device (ppp0): state change: disconnected -> unmanaged (reason 'unmanaged', sys-iface-state: 'removed')
Sep 10 07:58:26.135571 NetworkManager[1871]: <debug> kill child process 'pppd' (2292): terminated by signal 9 (1511158 usec elapsed)
This is due to nm-ppp-plugin waiting on SetIfIndex call until timeout,
which is longer than termination process timeout.
Calling g_dbus_method_invocation_return_value() on error fixes this.
Fixes: dd98ada33fhttps://mail.gnome.org/archives/networkmanager-list/2018-September/msg00010.html
(cherry picked from commit e66e4d0e71)
The Station.GetOrderedNetworks dbus method's return type has changed in
IWD commit 0a42f63d42be903a46c595693884772c1c84d39f as the last incompatible
API change before IWD 0.8 (docs change was made earlier in
0453308134a3aadb6a2ec6a78ea642e19427704c) so that network names and
types are no longer included in the reply. Expect this new reply
signature although still handle the old signature if we're using the
Device interface for IWD <= 0.7 compatibility.
It may be good idea to eventually pass the object manager instance from
nm-iwd-manager.c to nm-device-iwd.c to avoid using g_dbus_proxy_new_sync
and g_dbus_proxy_new_for_bus_sync in act_stage2_config, which possibly
generates a lot of DBus property queries.
https://github.com/NetworkManager/NetworkManager/pull/197
(cherry picked from commit 32506c8788)
Later we want to fully support wireguard devices. Also,
possibly activating a generic profile in a wireguard device
would make sense.
Anyway, for the moment, just prevent that from happening
by explicitly marking the device as unmanaged.
(cherry picked from commit e3bd482329)
Currently, NMDeviceWireguard does neither set connection_type_check_compatible
nor implement check_connection_compatible. That means, it appears to be compatible
with every connection profile, which is obviously wrong.
Allow devices not to implement check_connection_compatible() and avoid the issue
by rejecting profiles by default.
(cherry picked from commit baa0008313)
