We sometimes emit warnings after a connection is added. Currently
there's a warning when the connection ID collides with another one (and
a suggestion to use an UUID instead).
Let's move the check into a separate routine, so that we can reuse it
elsewhere, such as on connection "modify" (in a following commit).
Check if a connection uses something that is likely not to work --
either now or in future.
The ultimate decision on whether it's going to work is up to the daemon.
We just use the result to color the connection differently to provide
slight visual cue to the user.
Follow-up commits are going color Wi-Fi networks and connections that rely
on deprecated features differently, to provide a visual cue.
Add color definitions for those.
We have nm_device_master_add_slave(). This should be mirrored by
nm_device_master_release_slave() (not release-one-slave).
Thereby, also rename nm_device_master_release_slaves() to
nm_device_master_release_slaves_all() to make it clearer.
I find the two (dependent) booleans "configure" and "force" confusing.
nm_device_master_release_one_slave() has many callers, it's interesting
to be able to grep for the release-type. Add an enum to make this more
readable.
This makes the non-obvious fact clearer, that when you look up an object
by an untrusted, user-provided path, it might not be the object type you
are looking for. In basically all cases, you need to check that the
result is of the expected type. This helper makes that clearer.
We often create the source with default priority, no destroy function and
attach it to the default context (g_main_context_default()). For that
case, we have wrapper functions like nm_g_timeout_add_source()
and nm_g_idle_add_source(). Use those.
There should be no change in behavior.
g_idle_add() uses G_PRIORITY_DEFAULT_IDLE priority. Most of the time we don't
care much about the priority.
But at the places that this patch changes, I think that using
G_PRIORITY_DEFAULT_IDLE (and following g_idle_add()) is more correct. The
reason for this is not very strong, except that it's probably the better
choice. And the old choice was made because I didn't realize that
g_idle_add() uses another default priority. Hence, the old choice was not
for good reasons either.
nm_g_idle_add_source() is supposed to work like g_idle_add(). Use the correct
priority.
I think this causes little actual problems, because usually we don't
carefully tune the priorities and would be mostly fine with either.
Fixes: 6b18fc252d ('shared: add nm_g_{idle,timeout}_add_source() helpers')
NMClient is strongly tied to the GMainContext with which it was created.
Several operations must only be called from within the context. There
was an assertion for that.
However, creating (and init_async()) should be allowed to call not
from within the GMainContext. So if the current context has no owner
(is not acquired), then it's also OK.
Fix the assertion for that.
Fixes: ce0e898fb4 ('libnm: refactor caching of D-Bus objects in NMClient')
When we have a GError* variable on the stack, we usually want to pass
it on to function that can fail. In that case, the variable MUST be
initialized to NULL. This is an easy mistake to make.
Note that this check still can have lots of false positives, for
example, if you have a struct with an GError field. In that case, you
would need to ensure that the entire struct is initialized. Ignore the
warning then.
Also, the check misses if you declare multiple variables on one line.
But that is already discouraged by our style.
When cloud-init job (metadata service crawler) starts, it sends the
SIGTERM signal to nm-cloud-setup and force the nm-cloud-setup to
restart, however, because the error is not initialized as NULL in
`_init_start_cancelled_cb()` before it is set, nm-cloud-setup will hit
a dumped core.
TO fix it, initialize the error as NULL in `_init_start_cancelled_cb()`.
https://bugzilla.redhat.com/show_bug.cgi?id=2027674
Fixes: ce0e898fb4 ('libnm: refactor caching of D-Bus objects in NMClient')
Backtrace:
#0 g_logv (log_domain=0x7f833a872071 "GLib", log_level=G_LOG_LEVEL_WARNING, format=<optimized out>, args=<optimized out>) at ../glib/gmessages.c:1413
#1 0x00007f833a81f043 in g_log (log_domain=<optimized out>, log_level=<optimized out>, format=<optimized out>) at ../glib/gmessages.c:1451
#2 0x00007f833ab97230 in nm_utils_error_set_cancelled (is_disposing=<optimized out>, instance_name=<optimized out>, error=0x7ffff79cb980) at src/libnm-glib-aux/nm-shared-utils.c:2599
#3 nm_utils_error_set_cancelled (is_disposing=0, instance_name=0x0, error=0x7ffff79cb980) at src/libnm-glib-aux/nm-shared-utils.c:2590
#4 _init_start_cancelled_cb (cancellable=<optimized out>, user_data=0x5640ca292150) at src/libnm-client-impl/nm-client.c:7324
#5 _init_start_cancelled_cb (cancellable=<optimized out>, user_data=0x5640ca292150) at src/libnm-client-impl/nm-client.c:7307
#6 0x00007f833a93094a in _g_closure_invoke_va (param_types=0x0, n_params=<optimized out>, args=0x7ffff79cbb40, instance=0x5640ca267020, return_value=0x0, closure=0x5640ca29d430)
at ../gobject/gclosure.c:873
#7 g_signal_emit_valist (instance=0x5640ca267020, signal_id=<optimized out>, detail=0, var_args=var_args@entry=0x7ffff79cbb40) at ../gobject/gsignal.c:3406
#8 0x00007f833a930a93 in g_signal_emit (instance=instance@entry=0x5640ca267020, signal_id=<optimized out>, detail=detail@entry=0) at ../gobject/gsignal.c:3553
#9 0x00007f833a9a6475 in g_cancellable_cancel (cancellable=0x5640ca267020) at ../gio/gcancellable.c:513
#10 g_cancellable_cancel (cancellable=0x5640ca267020) at ../gio/gcancellable.c:487
#11 0x00005640ca1a8bd4 in sigterm_handler (user_data=0x5640ca267020) at src/nm-cloud-setup/main.c:599
#12 0x00007f833a819d4f in g_main_dispatch (context=0x5640ca268ef0) at ../glib/gmain.c:3337
#13 g_main_context_dispatch (context=0x5640ca268ef0) at ../glib/gmain.c:4055
#14 0x00007f833a86e608 in g_main_context_iterate.constprop.0 (context=0x5640ca268ef0, block=block@entry=1, dispatch=dispatch@entry=1, self=<optimized out>) at ../glib/gmain.c:4131
#15 0x00007f833a819463 in g_main_loop_run (loop=0x5640ca24fdb0) at ../glib/gmain.c:4329
#16 0x00005640ca1a6d04 in nmc_client_new_waitsync (cancellable=0x5640ca267020, out_nmc=0x7ffff79cbfa0, error=0x7ffff79cbf98, first_property_name=0x5640ca1b11db "instance-flags",
first_property_name=0x5640ca1b11db "instance-flags") at src/libnm-client-aux-extern/nm-libnm-aux.c:129
#17 0x00005640ca1a3863 in main (argc=1, argv=<optimized out>) at src/nm-cloud-setup/main.c:639
Pass the full hostname to the DNS manager, so that the domain gets
added to resolv.conf even when the hostname was truncated.
Note that "hostname" argument for plugins's update() function is
currently unused. Don't remove that because it can be potentially
useful to set a global search domain based on the hostname, but change
it to carry the domain directly.
Before, we would just ignore the errors when we passed an invalid value
to a property alias:
$ nmcli c add type ethernet mac Hello
Connection 'ethernet-1' (242eec76-7147-411a-a50b-336cf5bc8137) successfully added.
$ nmcli c show 242eec76-7147-411a-a50b-336cf5bc8137 |grep 802-3-ethernet.mac-address:
802-3-ethernet.mac-address: --
...or crash, because the GError would still be around:
$ nmcli c add type ethernet mac Hello ethernet.mac-address World
(process:734670): GLib-WARNING **: 14:52:51.436: GError set over the top of a previous GError or uninitialized memory.
This indicates a bug in someone's code. You must ensure an error is NULL before it's set.
The overwriting error message was: Error: failed to modify 802-3-ethernet.mac-address: 'World' is not a valid Ethernet MAC.
Error: failed to modify 802-3-ethernet.mac-address: 'Hello' is not a valid Ethernet MAC.
Now we catch it early enough:
$ nmcli c add type ethernet mac Hello
Error: failed to modify 802-3-ethernet.mac-address: 'Hello' is not a valid Ethernet MAC.
Fixes: 40032f4614 ('cli: fix resetting values via property alias')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1134
This allows to fetch the information about the AP that CSME if connected
to. It'll allow us to connect to the exact same AP and shaving off the
scan from the connection, improving the connection time.
