EGL_CONTEXT_RELEASE_BEHAVIOR_KHR determines what happends with implicit
flushes when context changes, on multigpu scenario we change context
frequently when blitting content. while we still rely on explicit sync
fences, the flush is destroying driver optimisations.
setting it to EGL_CONTEXT_RELEASE_BEHAVIOR_NONE_KHR essentially mean
just swap context and continue processing on the next context.
* shader: split CM rgba/rgbx into discard ones
make it branchless if we have no discards.
* shader: ensure we dont stall on vbo uv buffer
if we render a new texture before the previous was done gpu wise its
going to stall until done, call glBufferData to orphan the data.
this allows the driver to return a new memory block immediately
if the GPU is still reading from the previous one
* protocols: ensure we reset GL_PACK_ALIGNMENT
reset GL_PACK_ALIGNMENT back to the default initial value of 4
* shader: use unsigned short in VAO
loose a tiny bit of precision but gain massive bandwidth reductions.
use GL_UNSIGNED_SHORT and set it as normalized. clamp and round the UV
for uint16_t in customUv.
* shader: interleave vertex buffers
use std::array for fullverts, use a single interleaved buffer for
position and uv, should in theory improve cache locality. and also remove
the need to have two buffers around.
* shader: revert precision drop
we need the float precision because we might have 1.01 or similiar
floats entering CM shader maths, and rounding/clamping those means the
maths turns out wrong. so revert back to float, sadly higher bandwidth
usage.
* update doColorManagement api
* convert primaries to XYZ on cpu
* remove unused primaries uniform
---------
Co-authored-by: UjinT34 <ujint34@mail.ru>
* shader: begin the shader refactor
make SShader a class and rename it to CShader, move createprogram,
compileshader, logshadererror to CShader.
* shader: move uniform creation to CShader
move uniform creation to CShader, reduces tons of duplicated effort,
however forcing uniform names to be same in all shaders.
* shader: move to array based frag handling
use an array with an enum so it gets easier dealing with multiple
shaders, move creating program to a for loop and array, reduces line of
code a lot.
* shader: use shared ptr for frags
with smart pointers we can now rename useProgram to useShader and return
the shader directly, means only place we have to decide the shader frag
is when calling useShader. easier for future shader splitting to reduce
branching.
* shader: move unneded public members to private
move structs and uniforms to private add a get/set for initialtime
and add a getUniformLocation to make the code tell what its doing,
instead of direct array getting when all we wanted to get was its value,
also limits the setting of uniformLocations to the createProgram as it should
be.
* shader: fix style nits
set first enum member to 0 , remove extra {}
* shader: dont show a failed notif on success
the logic got inverted in the refactor here.
* shader: split CM shader to rgba/rgbx variants
split shader to rgba/rgbx variants, use bool, and reduce branching.
* shader: split up blurprepare CM and non CM
split up blurprepare, remove skipcm, move gain to gain.glsl.
remove ternary operator and reduce branching by using step() and mix()
use vec3 for gain, make brightness a cheap mulitplication with max.
* shader: split up border to CM/noncm variants
splitup border shader to CM/noncm variant, move common used things to
border.glsl , there is room for optimisations here but its a complex
shader im putting it for future PR.
* shader: touchup blurfinish
make brightness a cheap multiplication instead of branching.
mod is redundant, fract in hash already returns a value in [0.0, 1.0]
* fix named primaries
* default to gamma22
* mark mastering primaries as supported
* remove xx-cm and frog support
* immutable primaries and image descriptions
* clang-format
ubsan reports under wonky situation a runtime error of uninitialized
value lookups because of m_capStatus isnt initialized. so default
initialize it.
OpenGL.cpp:3331:26: runtime error: load of value 190, which is not a valid value for type 'bool'
These are: pointer_shape from the cursor-shape-v1 protocol prepared for v2, along with left_ptr...bottom_right_corner and killing (Hyprland specific)
pointer_shape_previous with
pointer_switch_time to blend between shapes
pointer_size scaled size as used by the normal cursor
pointer_pressed_positions[32] with
pointer_pressed_times[32] and
pointer_pressed_killed(32 bits) for click/touch animations and if they killed something
pointer_inactive_timeout with
pointer_last_active to smoothly fade the pointer out
pointer_hidden to hide it when the cursor is hidden (excluding by cursor:invisible as this config value can be used to turn off the normal cursor, which is useful when drawing it with the screen shader)
setCapStatus is a a heavy used function in hot rendering paths, it
shows up in profiling as using a bit of cpu just because of
unordered_set hashing etc, move to a enum and array and cache only the
heavily used ones.
* opengl: cache viewport state
according to nvidia docs calling glViewPort unnecessarily on the same
already set viewport is wasteful and can cause state changes when not
needed. cache it in a struct and only call it when the viewport is
actually changing.
* opengl: cache glenable/gldisable state
avoid making multiple glenable/gldisable calls on already set caps, can
cause state changes and incur driver overhead.
* opengl: cache glscissor box
only call glscissor if the box actually has changed, try to avoid state
changes.
* opengl: cache gluniform calls
cache the gluniform calls, the uniform values are cached in driver per
program only the drawcalls setting the uniform yet again with the same
value on same location is causing more overhead then caching it ourself
and just no oping on it if no changes.
* shader: rewrite handling of uniforms and state
this is way faster as we don't need to mess with maps (hashing, etc) and instead can just use an array
* opengl: stuff and 300 shaders
* opengl: typo
* opengl: get the uniform locations properly
now that the legacy shaders are gone get the uniformlocations for
SKIP_CM etc, so they can be properly set and used depending on if
cm_enabled is set to false or true, before it was falling back to a
legacy shader that didnt even have those uniforms.
* opengl: check epsilon on float and remove extra glcall
seems an extra unset glcall was added, remove it. and check the float
epsilon on the glfloat.
* opengl: remove instanced shader draw
remove the instanced boolean from the vertex shader, might be neglible
differences, needs more benchmark/work to see if its even worth it.
* texture: cache texture paramaters
parameters where occasionally set twice or more on same texture, short
version wrap it and cache it. and move gpu churn to cpu churn.
add a bind/unbind to texture aswell.
* texture: use fast std::array caching
cache the texparameter values in fast array lookups
and incase we dont want it cached, apply it anyways.
* shader: fix typo and hdr typo
actually use Matrix4x2fv in the 4x2fv cache function, and send the
proper float array for hdr.
* texture: make caching not linear lookup
make caching of texture params not linear.
* minor style changes
* opengl: revert drawarrays
revert the mostly code style reduce loc change of drawarrays, and focus
on the caching. its a if else case going wrong here breaking
blur/contrast amongst others drawing.
---------
Co-authored-by: Vaxry <vaxry@vaxry.net>
* opengl: remove unnecessery glflush calls
glflushing forces the driver to break batching and issue commands
prematurely and prevents optimisations like command reordering and
merging.
many glFunctions already internally glflushes and eglsync creation still
has a glflush at end render. so lets reduce the overhead of these calls.
* opengl: reduce glUseProgram calls
apitrace shows cases where the same program gets called multiple times,
add a helper function that keeps track of current program and only call
it once on same program. reduces slight overhead.
* opengl: use more efficient vertex array object
use a more modern vertex array object approach with the shaders, makes
it a onetime setup on shader creation instead of once per drawcall, also
should make the driver not have to revalidate the vertex format on each
call.
