Since the commit "color-lcms: extract HDR static metadata from profile"
this was all dead code.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This tests our dma-buf buffer support for GL screenshots. We use two
backends that have outputs with different y origin in order to exercise
the implementation.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
I was doing
$ mseon setup --wipe
$ meson test
and hit
../../git/weston/tests/constraints-test.c:31:10:
fatal error: pointer-constraints-unstable-v1-client-protocol.h:
No such file or directory
31 | #include "pointer-constraints-unstable-v1-client-protocol.h"
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
There is no need to special-case this generated header in foreach-tests
if we list it as an order-only dependency implied by dep_test_client.
The viewporter header is already there.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
xdg-client-helper is already built into the dep_test_client library,
there is no need to add the sources again.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
A minor simplification to tests/meson.build. The disabler object
prevents the test from being built or run.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
It was getting difficult to see which files were part of the test
harness and which were actual tests. Moving the harness sources into a
subdirectory helps to see at a glance what is what, and will allow using
shorter file names in the future.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The protocol requires clients to perform an initial commit before they
receive configure events:
> After creating a role-specific object and setting it up (e.g. by sending
> the title, app ID, size constraints, parent, etc), the client must
> perform an initial commit without any buffer attached. The compositor
> will reply with initial wl_surface state such as
> wl_surface.preferred_buffer_scale followed by an xdg_surface.configure
> event. The client must acknowledge it and is then allowed to attach a
> buffer to map the surface.
Previous to this patch various calls such as set_fullscreen() or
set_maximized() would schedule configure events, resulting in clients
being able skip the initial commit. This again made it possible to write
clients that only work on Weston, in violation of the protocol.
For xdg-popups we already tracked the initial commit status. Move it
to xdg-surface, guard schedule_configure() on it and ensure to run the
later on the initial commit.
Incorporate tests that checks if we get configure events when calling
set_fullscreen/set_maximized and tests that uses the main xdg_surface as
a parent to a sub-surface (which initially triggered this issue).
Signed-off-by: Robert Mader <robert.mader@collabora.com>
Test the various combinations of:
1. Renderer backends - currently GL only.
2. Renderer modes - plane-offloading/vkms, shaders in Mesa, internal
shaders.
3. Buffer-types - SHM and DMABuf.
4. Coefficient/range combinations.
Signed-off-by: Robert Mader <robert.mader@collabora.com>
Introduce support for the commit-timing protocol to allow applications
to attach a presentation time to a content update.
We use the repaint timer to schedule content updates in advance of
the frame time when they should be displayed.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
This includes a few changes, but given that we still want to bisect
things when they break I'm pulling some of the changes into a bigger change.
Here's a list of most noticeable that I had to address in order to make
this switch:
- added a PACKAGES_SPECIFIC env variable to able to pass different
packages to each version. Some packages basically changed their names
and need to pass a different name
- added USE_DEBIAN_BACKPORTS and use it when adding -backport apt
sources for each Debian version
- llvm-19 now requires some additional packages for trixie
- add imghdr for sphinx for trixie
- had to keep use_tls=0 and modified the notes to point now to Trixie
instead of Bookworm
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Add support for the fifo protocol, which allows an application to submit
a content update that can only be applied after the previous content
update has been active for a display refresh.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Recent improvements to llvmpipe made it possible to test dmabuf import
and offloading on vkms. Use our new client-buffer helper and the
presentation protocol to implement tests for simple offloading
scenarios.
Right now this is limited to the vkms default config, only providing us
with one primary and one cursor plane. In the future we can extend the
test to include more advanced scenarios.
Signed-off-by: Robert Mader <robert.mader@collabora.com>
This tests the [output] section key 'color-profile', which is meant for
setting up parametric color profiles. It tests the special names, and
fetching values from EDID. There are also tests for all accepted keys in
a [color-profile] section.
These tests are all positive. Error messages are tested in another
patch.
The test client helper changes are needed for loading the EDID file.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Follow-up of "color: introduce output color effects". This adds a few
sanity tests for color effects.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Use the shared helper in order to avoid duplication. This will also
ensure that any format added to the test will also be usable by other
tests and clients.
Signed-off-by: Robert Mader <robert.mader@collabora.com>
lua-shell is a new meta-shell for Weston. It does nothing in and of
itself, but is defined to be user-scriptable and configurable. A
supplied Lua script will be interpreted and executed by Weston, allowing
full control over window management in response to events.
This includes a shell.lua example script which behaves as a tiling WM.
Co-authored-by: Michael Tretter <m.tretter@pengutronix.de>
Co-authored-by: Marius Vlad <marius.vlad@collabora.com>
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
And make use of it in kiosk-shell-test. There's no functional change,
this is for other shells to re-use the code here.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Allow querying supported formats and modifiers.
We use version 3 as it is easier to implement and also works
if no main device is present - such as when using llvmpipe.
Signed-off-by: Robert Mader <robert.mader@collabora.com>
Setup a custom assertion handler that increases an assertion counter
instead of aborting on failure. This allows to run all the sub tests
defined for a test and to correctly report which sub test failed.
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
This adds tests to create image descriptions through color parameters
using the CM&HDR protocol extension.
The code for that was added in commit "color: allow clients to create
image description from parameters".
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Without this fix, we have randomly been getting CI failures due to
LeakSanitizer itself crashing after all the tests in a program have
succeeded. This has been happening randomly for a long time, but
https://gitlab.freedesktop.org/wayland/weston/-/merge_requests/1486
made it very reliably repeatable in the job x86_64-debian-full-build
(and no other job) in the test-subsurface-shot program.
--- Fixture 2 (GL) ok: passed 4, skipped 0, failed 0, total 4
Tracer caught signal 11: addr=0x1b8 pc=0x7f6b3ba640f0 sp=0x7f6b2cc77d10
==489==LeakSanitizer has encountered a fatal error.
I was also able to get a core file after twiddling, but there it ended
up with lsan aborting itself rather than a segfault.
We got some clues that use_tls=0 might work around this, from
https://github.com/google/sanitizers/issues/1342https://github.com/google/sanitizers/issues/1409
and some other projects that have cargo-culted the same workaround.
Using that cause more false leaks to appear, so they need to be
suppressed. I suppose we are not interested in catching leaks in glib
using code, so I opted to suppress g_malloc0 altogether. Pinpointing it
better might have required much more slower stack tracing.
wl_shm_buffer_begin_access() uses TLS, so no wonder it gets flagged.
ld-*.so is simply uninteresting to us, and it got flagged too.
Since this might have been fixed already in LeakSanitizer upstream, who
knows, leave some notes to revisit this when we upgrade that in CI.
This fix seems to make the branch of
https://gitlab.freedesktop.org/wayland/weston/-/merge_requests/1486
in my quick testing.
Suggested-by: Derek Foreman <derek.foreman@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Exercise the color-management protocol mechanics.
This lacks a few test cases that are a bit harder to have, e.g. testing
that a bad ICC file gets rejected. In the future we plan to add them.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
This is very trivial test, which does not skip correctly when built with
color-management-lcms=false. It fails instead.
Since alpha-blending test already covers everything that color-manager
test did, remove color-manager test.
My editor eliminated a stray whitespace, too.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Add yet another flavor of assertion macros.
Unlike libc assert.h assert(), these cannot be easily disabled by the
build. They also print both the implied expression and the compared
values.
Unlike ZUC macros, there is much less framework code and it can handle
also floating-point types.
The function custom_assert_fail_ can be redefined, meaning that
different compilation units can do different things on failure.
Also the 'compositor' parameter was added to the new macros because we
plan to use these asserts in our log infrastructure, and we want to
print the "failure" messages in the right log scopes. Having the
compositor already in the macros will avoid double work.
Another future possibility is to write specific asserts for the test
suite. So we would be able to write a test suite failure function that
just print what "failed" without aborting.
There is also limited support for custom types.
These are actually pretty similar to libinput's litest macros.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
This is a very simple test, mostly intended as a demonstration of the
new client<->compositor breakpoint infrastructure. It ensures that for a
simple test surface, a paint node has been created in the output's
paint-node list, reflecting the properties of the attached buffer.
This is an example of properties which are not observable by regular
clients.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Add support for clients to request the server insert breakpoints at
various points in its processing. These breakpoints are handled
internally by semaphores (visible to tests through helpers): when the
server reaches the specified point, it will pause execution until the
client allows it to restart.
A weston_compositor pointer returned at each breakpoint allows the
client to reach across the thread boundary and access the server's
internal data structures. This can be used to, for example, inspect
paint nodes, internal damage, or any other work which is not necessarily
client-visible.
The majority of tests will not need to use this infrastructure; it is
only intended for tightly-coupled tests which can very specifically
dictate and anticipate the server's execution flow.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This will help us to debug our color pipeline optimizer without the
need to craft special ICC profiles for that. In this initial patch,
we are able to add matrices and curve sets to the pipeline and assure
that the optimizer is doing the right thing.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
cf. the never-ending saga of how we can't neuter the fontconfig leaks,
also pass our CI leak-sanitizer suppression file when running tests
locally. This makes it easier to run with ASan enabled in your local
environment.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This adds three new helpers: one to iterate over all debug scopes
created/added and other two are for simpler getters for the scope name
and the description.
Included with this change is also a simple test to retrieve them.
This is an alternative to using the debug scope list advertised when
using the weston-debug private extension. libweston users can use this
directly to know which scopes they can subscribe to, and there's no need
to have a client implementation for the weston-debug protocol.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
This adds a test to ensure that the DRM-backend writeback screenshooter
is working properly.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
