Rather than silenty doing things, make them explicit and error if
anything is not quite right. Suggested by Daniel Stone.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
[Pekka: updated copyright years]
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Bryce Harrington <bryce@osg.samsung.com>
Rename interfaces and the protocol to follow the policy.
Reset interface versions.
Replace "surface coordinates" with "surface local coordinates".
Hook up to build and install.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Bryce Harrington <bryce@osg.samsung.com>
Remove the old, redundant request. The new way is to call both
wp_viewport.set_source and wp_viewport.set_destination when you want to
set everything.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Bryce Harrington <bryce@osg.samsung.com>
This XML file has been copied verbatim from Weston 1.10.0 release,
protocol/scaler.xml.
The interfaces still need renaming according to wayland-protocols
policy. Also a redundant request needs to be removed. These will be done
in a follow-up patch to clearly show the changes.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Bryce Harrington <bryce@osg.samsung.com>
Check autoconfs $cross_compiling instead as AC_CANONICAL_HOST call
will fail if the host cpu is not recognised (which can happen when
e.g. Yocto builds for "allarch").
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Attempting to clarify the paragraph. The key points are that feedback is
double-buffered, part of a commit as all double-buffered state is, and
it defines the term "content update" used later.
The new phrasing defines not only a content update, but also content
submission which is used further on in the spec. It implies the
double-buffered state semantics without actually using the term (it's
not really state to be applied), and makes a link with the very next
paragraph describing the prensentation time.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Move compositor implementors' guidelines to the end. Recombine the
affected paragraphs.
No changes to the wording are made.
Suggested-by: Bryce Harrington <bryce@osg.samsung.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Associates better with the surrounding paragraphs by not jumping topics
back and forth.
Suggested-by: Bill Spitzak <spitzak@gmail.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Add missing periods that terminate sentences.
Correct ARBITRARY_MODE to match the actual enum value name.
Adjust one post-period space to match the rest of the content.
Downcase summary description to match the rest of the document.
Add line breaks between sequential enum elements to match conventions
in this, and other, protocol xml docs.
Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Adds one line between two sequential request elements, to match conventions
within this, and other, protocol xml docs.
Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Remove line breaks preceding closing interface tags, to match conventions
in this, and other, protocol xml docs.
Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Downcase the protocol summary description to match other protocols.
Replace 'surface-relative' with 'surface local' for consistency and clarity.
Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Adjust double-space after period to be consistent with all content.
Adjust vertical whitespace surrounding first and last protocol tag to
match conventions in this, and other, protocol xml docs.
Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Downcase the protocol description summary.
Adjust two double-spaces to one, like the rest of the content.
Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Correcting minor grammar and punctuation affords clarity.
Standardize the use of 'surface local coordinates' in lieu of 'surface relative'.
Capitalize Wayland where appropriate, similar to other occurences.
Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Add/remove vertial whitespace between xml elements
according to conventions elsewhere within this, and other,
protocol xml docs.
Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
This patch was intended to be part of the coming v6 version of the
xdg_shell protocol. It is an semantically backward incompatible change,
so it cannot be implemented in xdg_shell v5 without breaking
compatibility with available clients.
This reverts commit 275fd34023.
this change ensures that the client will set its initial state
before performing any drawing, ensuring that there is no mismatch
when creating a surface with a non-default state
(eg. maximize, fullscreen, ...)
looking at the following event flows:
1) wl_surface.attach, wl_surface.commit, xdg_shell.get_xdg_surface
2) wl_surface.attach, xdg_shell.get_xdg_surface, wl_surface.commit
3) xdg_shell.get_xdg_surface, wl_surface.commit, xdg_surface.configure,
wl_surface.attach, wl_surface.commit
only 3) is now valid, while 1) and 2) will trigger errors as a result
of handling buffers prior to creating the xdg surface
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Signed-off-by: Mike Blumenkrantz <zmike@osg.samsung.com>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Rename interfaces and the protocol to follow the policy.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
This XML file has been copied verbatim from Weston 1.10.0 release,
protocol/presentation_timing.xml. The last behavioral change to that
file was in December 2014, so the behaviour is considered stable.
Interfaces still need to be renamed according wayland-protocols policy.
That will be done in a follow-up patch to clearly show the changes.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
This patch introduces a new protocol for locking and confining a
pointer. It consists of a new global object with two requests; one for
locking the surface to a position, one for confining the pointer to a
given region.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Reviewed-by: Daniel Stone <daniels@collabora.com>
The wp_relative_pointer interface is an extension to the wl_pointer
interface created from wl_seat. It has the same focus, but adds the
functionality of sending relative pointer motions unhindered by
constraints such as monitor edges or other barriers. It also contains
unaccelerated pointer motion information.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Reviewed-by: Daniel Stone <daniels@collabora.com>
We can now test all the protocol files by running make check (or distcheck)
which will pass them through the scanner.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Mike Blumenkrantz <zmike@osg.samsung.com>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
noarch_pkgconfigdir is not available on oldish pkg-config's. Among
other things this affects Wayland's nightly auto-build Ubuntu 14.04
PPAs.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Quentin Glidic <sardemff7+wayland@sardemff7.net>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
File bugs to the 'unspecified' version of the 'wayland' component. We
currently don't have a 'wayland-protocols' component, and 'wayland' is
the closest there is right now.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
It is arch-independent, so no need to install it to /usr/lib*
Cc: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Igor Gnatenko <i.gnatenko.brain@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
The scanner parses CDATA in <entry> but lets it disappear otherwise. To have
descriptive text associated with the <entry>, we need a <description> tag -
and that must have a summary attribute. The current scanner doesn't handle
<description> however, so to get the summary printed in the output file we
still need the summary attribute in the entry tag too.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
