This is basically cut-and-paste from the swrast implementation, and it
could probably be (slightly) more optimal.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
No driver supports this extension, and it seems unlikely than any driver
ever will. I think r300c may have supported it at one time, but that
driver has already been removed.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
The final step of _mesa_unpack_depth_span is to take the temporary
GLfloat depth values and convert them to the desired format. When
converting to GL_UNSIGNED_INTEGER with depthMax > 0xffffff, we use
double-precision math to avoid overflow and precision problems.
Or at least that's the idea. Unfortunately
GLdouble z = depthValues[i] * (GLfloat) depthMax;
actually causes single-precision multiplication, since both operands are
GLfloats. Casting depthMax to GLdouble causes the scaling to be done
with double-precision math.
Fixes a regression in oglconform's depth-stencil basic.read.ds test
since c60ac7b179, where the expected and
actual values differed slightly. For example, 0xcfa7a6 vs. 0xcfa7a4.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=49772
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
v2: Use base-10 for versions like gl_context::Version. Suggested by Ken.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2: Use base-10 for versions like gl_context::Version. Suggested by Ken.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
In the i965 dirver, the chipset must be i965.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
This forces the drivers to do at least some validation of context API
and version before creating the context. In r100 and r200 drivers, this
means that they don't do any post-hoc validation.
v2: Actually reject compatibility profile 3.2+ contexts. Thanks Ken.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
It may be possible to trim the list of extensions futher. These are
just the obvious extensions that add functionality that the core context
explicitly forbids. Apple's core-context extension list is *just* the
extensions on top of the core GL version. I'm not sure we want to go
that far, but removing some things that have been in core since 2.1 may
be okay.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2: Add both top_srcdir and top_builddir to mesa asm include dirs.
These require both in-tree and build-time-generated files.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Like in src/mesa, use GLSL_BUILDDIR/GLSL_SRCDIR to unambiguously
distinguish between in-tree and generated files.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Also fix include paths for the generated headers.
v2: Switch to using self-explanatory BUILDDIR/SRCDIR defined from
top_builddir/top_srcdir rather than the ambiguous TOP.
v3: Add both top_builddir and top_srcdir to include flags for mesa asm.
These rely on both in-tree and build-time-generated includes.
v4: Rebased on top of 948c8f502a.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
After realizing that brw_finish_batch emitted some final PIPE_CONTROLs
to record occlusion queries, Chris noted that we probably hadn't
reserved enough space to actually emit them.
Reserving a full 60 bytes seems a bit harsh, since we only need that
much if occlusion queries are actually active. Plus, 28 bytes would be
sufficient for Gen7, and 24 for Gen4-5.
We could optimize this in the future, but it doesn't seem too critical.
NOTE: This is a candidate for stable release branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=53311
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
On Gen4+, brw_finish_batch() calls brw_emit_query_end(), which emits
some extra PIPE_CONTROLs to capture the current occlusion query data.
Unfortunately, it was being called *after* _intel_batchbuffer_flush
added the MI_BATCH_BUFFER_END, meaning those PIPE_CONTROLs didn't get
inside the batch.
Not only does this likely cause bogus occlusion query values, it can
also cause crashes: with the recent change to use 64-bit depth count
writes on Gen6+, we started emitting an odd-length PIPE_CONTROL, which
happened after the MI_NOOP padding. This resulted in an odd-length
batch buffer, which resulted in execbuf2 returning -EINVAL and the
application dying with an intel_do_flush_locked failure.
On older generations, finish_batch() doesn't emit any state, so this
change shouldn't have any effect.
Huge thanks to Chris Wilson for helping me figure this out.
NOTE: This is a candidate for stable release branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=53311
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
v2: fix bad comment from before I gave up and decided to just use doubles.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
I want to introduce some more debug output for performance surprises that
includes fallbacks, but aren't necessarily software rasterization. Leave
INTEL_DEBUG=fall in place for those that have used that flag before.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Avoid INVALID_OPERATION error if decompressing rectangle texture.
Setting mipmap level limits for those textures is error that must not be
hit by meta code to mislead user.
[v3/Kayden]: Resolve conflicts due to Eric picking a subset of Pauli's
original changes.
Signed-off-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Sampler objects are perfect for meta operations.Sampler object
is separate state object that shadows the sampling state in texture
object. With sampler object mipmap can maintain same sampling state for
all subsequent generation requests.
Signed-off-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Sampler queries are so far made only for enabled texture unit. But if
any code would query sampler before checking texture unit state that
would result to NULL deference.
Making the inline helper easier to use with NULL check makes a lot sense
because compiler is likely to combine the checks for the current texture.
Signed-off-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
In tune with previous patches. Again there is duplication of information
in function parameters that is good to remove.
Signed-off-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Size and format information is always stored in gl_texture_image
structure. That makes it preferable to remove duplicate information from
parameters to make interface easier to understand.
Signed-off-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
