This allows us to communicate to the back-end that we don't actually
know if the framebuffer is multisampled or not. No drivers set anything
but ALWAYS/NEVER and we still have a few ALWAYS/NEVER assumptions but
those should be asserted.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21094>
This allows for the possibility that we may not know at compile time if
sample shading is enabled through the API. While we're here, also
document exactly what this bit means so we don't confuse ourselves.
v2: Fixup coarse pixel values (Lionel)
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21094>
Whenever one of them is BRW_SOMETIMES, we depend on dynamic flag pushed
in as a push constant. In this case, we have to often have to do the
calculation both ways and SEL the result. It's a bit more code but
decouples MSAA from the shader key.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21094>
If you're only affecting one or a couple of drivers, it would be nice if
your pipeline buttons on the web UI weren't full of manual run buttons for
all the other drivers.
This is a bunch of duplicated lines, but less than it could have been now
that we have !references.
In some of these cases (i915g, nouveau, etnaviv), we have no non-manual
jobs for those drivers, so I could have just rewritten the original
"driver-rules" to "driver-manual-rules". I decided to keep things
consistent between drivers, though, because this is all esoteric enough to
readers already without making different drivers' rules look different.
Fixes: #4891
Acked-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17445>
Here adding kmd_type parameter to
intel_gem_read_render_timestamp(), intel_gem_can_render_on_fd() and
intel_gem_supports_protected_context().
Those 3 functions will have Xe implementations, the other functions
in intel_gem.h will not be called by Xe code paths so not adding
kernel_driver_type to it.
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20773>
These are expected to fail by the design of gbm. Don't make each driver
track them.
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Acked-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Martin Roukala <martin.roukala@mupuf.org>
Acked-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20798>
I'm going to add some automatic platform-based skips lists shortly (like
all-skips but more targeted), and this avoids needing to add them to each
.toml.
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Acked-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Martin Roukala <martin.roukala@mupuf.org>
Acked-by: David Heidelberg <david.heidelberg@collabora.com>
Acked-by: Erico Nunes <nunes.erico@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20798>
e31d08d307 made it a skip, so no need to
track these any more.
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Acked-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Martin Roukala <martin.roukala@mupuf.org>
Acked-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20798>
This replaces brw_fs_get_dispatch_enables(), which was added in
b9403b1c47 ("intel: factor out dispatch PS enabling logic"), but this
function will not work well for future changes to 3DSTATE_PS.
So, instead, this moves the related code into a "genX" file which can
directly update 3DSTATE_PS for the given platform.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20329>
i965 used these, but Gallium drivers do this lowering via a separate
nir_lower_tex call from st/mesa. Vulkan drivers don't use these at all.
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20223>
The compiler looks at this key field to determine whether to perform
an MCS fetch for a txf_ms or samples_identical texture message, if a
nir_tex_src_ms_mcs_intel source wasn't provided. If it isn't set,
it instead uses constant 0 (nothing is compressed).
All of the drivers (iris, crocus, anv, hasvk) unconditionally set this
to ~0 because we don't want to pay for costly shader recompiles (which
can cause nasty stuttering). Most textures are compressed anyway, and
the hardware ignores the l2dms MCS parameter if MCS is disabled.
The only user was BLORP, which sets the key field based on whether the
texture's aux usage has MCS. But if it has MCS, it also does the MCS
fetch itself and supplies it directly. Otherwise, it relies on the
compiler to fill in the 0 value. But it could easily just provide the
0 value itself in that case and not rely on the compiler at all.
With that fixed, we can just drop the key fields entirely. We leave
them as padding for now to avoid repacking structures; we won't need
to after the next commits anyway.
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20223>
All 4 drivers were fetching the same information, better do it on one
place.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19425>
We don't need to login anymore, but we can't use plain minio commands
now. `ci-fairy` got a helper as `s3cp` to keep an almost identical
API.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19076>
Again sharing the same function across all Intel drivers.
There is still two additional DRM_IOCTL_I915_GEM_CONTEXT_GETPARAM
calls, one in intel/dev and other in perf.
The first one can't call intel_gem_get_context_param() because of the
build order of libs and the second one because it sets the size
parameter.
Will revisit those calls in future but this is already an improvement.
v2:
- using intel_gem_get_context_param() for the recently added query for
I915_CONTEXT_PARAM_PROTECTED_CONTENT
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18974>
Again sharing the same function across all Intel drivers.
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18974>
Again sharing the same function across all Intel drivers.
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18974>
Add intel_gem_create_context() to common/intel_gem.c/h and use it
on Iris, Crocus, ANV and HASVK.
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18974>
This is required when crocus is enabled in rusticl,
the lack of it contributes to this error:
thread '<unnamed>' panicked at 'Context missing features. This should never happen!', ../src/gallium/frontends/rusticl/mesa/pipe/context.rs:44:13
Signed-off-by: Thomas Debesse <dev@illwieckz.net>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19001>
Supported in all hardware and software drivers. Only that don't support
are virgl and svga, depending on host capabilities. I don't think
there's anything to be done there. This does give fewer places to screw
up the CAPs, though, because everyone wants ARB_buffer_storage.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Marek Ol<C5><A1><C3><A1>k <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19392>
There are three tiers of drivers:
* Drivers that support MRT and support mixed colorbuffer formats. All modern
hardware fits this as it becomes a spec requirement.
* Drivers that do not support MRT. Then this CAP is a no-op, so we might as well
set it by default even here (this commit trivially enables the CAP for lima,
vc4, etanviv).
* Drivers that support MRT but do not support mixed colorbuffer formats! Very
little hardware fits this category as it doesn't suffice for MRT in most APIs.
Unfortunately we have a few drivers that are in this category, preventing us
from bulldozing the CAP altogether.
Given that the CAP only exists for a few legacy drivers, default it to being
enabled to avoid new drivers falling into the trap of forgetting to enable it.
Failing to set this CAP causes failures in
dEQP-GLES3.functional.fbo.completeness.*
Drivers which still do not set this CAP: nv30, r300 (older than r500), virgl in
some cases. r300/r400 is due to a hardware requirement as Emma points out.
v2: Advertise the cap on lima like the commit message claims (delete the special
case).
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19079>
All current drivers reports supporting this cap, let's just assume
it's always supported.
It seems better to lower this in the drivers, like we already do for
etnaviv, panfrost and zink...
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Begrudgingly-reviewed-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19049>
A lot of code zero-initializes pipe_sampler_state, and sets the states
the non-zero fields manually. This means that normalized_coords is the
"default" setting.
However, setting normalized_coords to true isn't allways allowed, and
we'd need to check PIPE_CAP_TEXRECT first. So it's not really the ideal
default here. There's recently been found quite a bit of bugs in this
area, where the state-tracker didn't properly lower texrects.
Let's switch this around to avoid more bugs like this in the future.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18971>
Timestamp read is not in any hot path so there is no down-sides in
share the same function between iris, crocus, anv and hasvk.
Also while at it also dropping the functions to read MMIO from kernel,
the only use is read render timestamp so we don't need it.
v2:
- fix compilaton of ds
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18920>
Seems we haven't been running the Crocus CI much lately, and some things
has changed. The new failures needs to be investegated and fixed, but
let's update the results for now.
Acked-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18822>
Intel has different Z interpolation float point rounding
than other mesa gpus
For example gl_Position.z = 0.0 will be interpolated to
gl_FragCoord.z = 0.5 for all gpus
gl_FragCoord = -0.00000001 will be interpolated to
gl_FragCoord.z = 0.4999999702 for Intel
and rounded to gl_FragCoord.z = 0.5 for other gpus
Games with LEQUAL depth func will fail depth test on Intel
and will pass it on other gpus in such case
This workaround lowers translated depth range
and several gl_FragCoord.z coords with extra small difference
will be translated to the same UINT16\UINT24\UINT32
value of an integer depth buffer
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/7199
Signed-off-by: Illia Polishchuk <illia.a.polishchuk@globallogic.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18412>
We have fine NIR lowering for this (already called from mesa/st), no need
for a separate GLSL pass.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18361>
We've already allocated the pipe resource, so we ought to free it
before returning.
Fixes: d8a38edc48 ("crocus: fail resource allocation properly.")
Fixes: f3630548f1 ("crocus: initial gallium driver for Intel gfx 4-7")
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18311>
If we can't create a staging resource, then fall back to direct CPU
mapping (possibly with a stall). This is a rare case, but it could
happen for very large staging buffers.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18311>
Failing to create staging resources isn't necessarily a critical error,
and we probably don't want to be printing out XXX messages. I mostly
had this here when bringing up iris and resource creation was failing
because I'd done something wrong when writing the code. Then it got
copied over to crocus.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18311>
Whenever we add or remove a flag here, we need to update a bunch of
drivers in a fragile way. Moving to flags here instead should make this
a bit easier to maintain in the future.
Reviewed-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17959>
neither of these have a real alpha channel, so reuse the xrgb blend
clamping here to ensure the "right" alpha value is used
cc: mesa-stable
fixes:
spec@arb_texture_float@fbo-blending-formats
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17687>
