We should always do this. So far we have been getting away with this
because we overallocate at v3dv_job_start_frame, but that won't do
for secondary command buffers for example, it is also unreliable
if CLs grow past that initial allocation.
In the future, we might want to fix our emit macros so they do the
allocation check implicitly, which would simplify the code and would
make this process a lot less error prone.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
During a command buffer reset we call cmd_buffer_init(), which will
add the command buffer to the pool, so make sure we remove it first
and that we use a safe iterator when resetting a pool.
Fixes:
dEQP-VK.api.command_buffers.pool_reset_reuse
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
In order to properly check (and possibly compile) shader variants we
need a pipeline and a compatible descriptor set. So far we were trying
to do that check as early as possible, so we were trying to do it at
CmdBindPipeline or CmdBindDescriptorSets, and a combination of dirty
flags. This showed to not cover all the corners cases, and made the
code complex, as needed to handle cases where the descriptors were not
yet available, and return early. The latter also meant that we were
running several checks that failed in the middle.
This commit moves the variant check to CmdDraw, when we should have a
pipeline and compatible descriptor sets, and simplifies and makes more
strict the existing code.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
This reverts a previous half-attempt at an implementation of events
using a BO to hold the event state, and provides a full
implementation. V3D doesn't have any built-in GPU functionality to
wait on any kind of events, so we need to implement this in the driver
an therefore we no longer need to use a BO for the event state.
Instead, we implement GPU waits by using a CPU job for the wait
operation that spawns a wait thread if the wait operation doesn't have
all its events signaled by the time it is processed. To implement the
semantics of the wait correctly, any jobs in the same command buffer
that come after the wait will not be emitted until the wait thread
completes.
If a submit spawns any wait threads for a command buffer we can't
signal any semaphores for it until all the wait threads complete and
we know that all the jobs for those command buffers have been
submitted. The same applies to the submit fence, if present.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
This is generally very difficult to handle properly everywhere, but
at least this is good enough to make the few CTS tests for this happy.
Fixes (on Rpi4):
dEQP-VK.wsi.xlib.swapchain.simulate_oom.*
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
There is a hw bug by which the only way to clear the depth/stencil
tile buffers is to emit a clear of all tile buffers, so if we have
to do any such clears, we just emit a single clear of all tile
buffers and skip doing any per-buffer clears, even for color buffers,
since they would be redundant.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
We were declaring the destroy callback function as taking a pointer for the
vulkan object handle and relying on an implicit conversion to the Vulkan
handle type, however that would be incorrect on 32-bit platforms, where
non-dispatchable Vulkan objects (the kind that we may allocate privately during
command buffer recording), are defined as uint64_t, so the signature of the
destry callback type doesn't match the signature of the actual Vulkan
function, leading to bogus results. Fix that by using uint64_t instead.
This fixes compilation warnings and also crashes in some tests when
compiling and executing natively in Rpi4.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
We were pre-packing the constants from the pipeline state and then
always emitting that at draw time, ignoring dynamic state. This makes
it so we don't prepack at pipeline creation time and we always emit
the correct constants directly the command buffer dynamic state.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
So far we were just asserting or aborting if any of the internal
method used during the pipeline creation failed.
We needed to change the return value of several methods, in order to
bubble up the proper memory allocation error.
Note that as the pipeline creation is complex and splitted in several
methods, if an error happens in the middle, it returns back, and rely
on the higher level to call PipelineDestroy. This method needs to take
into account that some of the resources could have not been allocated
when freeing it.
Also note that v3dv_get_shader_variant is used during the pipeline
bind, as with the new resources bound, we need to check if we need to
recompile a new variant. At that moment we are not creating a new
vulkan object so we can really return a OOM error. For now we just
assert on that case.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
This uses the framework to register private commmand buffer objects
that get freed automatically when the command buffer is destroyed by
the application.
This change also moves the descriptor set pool that the meta blit path
uses to allocate descriptors for the blit source textures, from the
device to the command buffer, so we can have a descriptor pool per
command buffer. This is necessary to ensure correct behavior when
doing multi-threaded command buffer recording (alternatively, we would
have to lock around the descriptor set allocation code, which would be
undesirable).
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
This allows the driver to register private Vulkan objects it creates as part
of command buffer recording (usually for meta operations) in the command
buffer, so they can be destroyed together with it.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
This needs to be updated everytime we bind a new pipeline, but we can
bind a pipeline and not have an actual job yet, so we want to postpone
this until we actually need to emit CFG_BITS, during the pre-draw
setup.
Also, rename the update helper to be about the job rather the command
buffer, since it is updating state that we track per job.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
We were asserting that we had a valid subpass index, but we can have
meta operations that run outside a render pass, such as for blitting.
If we allow this, then we also need to account for the fact that
pipelines can be bound outside a render pass too.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
While very limited in scope, this might be the most efficient way to blit
when applicable. In fact, we might also want to use this for the image copy
commands when possible instead of the TLB.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
The design for queries in Vulkan requires that some commands execute
in the GPU as part of a command buffer. Unfortunately, V3D doesn't
really have supprt for this, which means that we need to execute them
in the CPU but we still need to make it look as if they happened
inside the comamnd buffer from the point of view of the user, which
adds certain hassle.
The above means that in some cases we need to do CPU waits for certain
parts of the command buffer to execute so we can then run the CPU
code. For exmaple, we need to wait before executing a query resets
just in case the GPU is using them, and we have to do a CPU wait wait
for previous GPU jobs to complete before copying query results if the
user has asked us to do that. In the future, we may want to have
submission thread instead so we don't block the main thread in these
scenarios.
Because we now need to execute some tasks in the CPU as part of a
command buffer, this introduces the concept of job types, there is one
type for all GPU jobs, and then we have one type for each kind of job
that needs to execute in the CPU. CPU jobs are executed by the queue
in order just like GPU jobs, only that they are exclusively CPU tasks.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
Most of our state doesn't carry over across jobs, so it needs to be re-emitted.
For example, if we have two render passes running back to back using the
same pipeline, the application could decide to only bind the vertex buffer
or/and the pipeline just once, but as soon as we record the second render
pass and create a new job for it we will need to re-emit the shader state
record for it just because it is a new job.
We could probably only do this for jobs inside a render pass, since those
are the only ones that actually draw something and need to care about
dirty state, however, there is no harm in doing this for all jobs, for the
same reason.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
When testing if we could merge the new subpass into the previous one
We were taking the subpass index from the state (which isn't updated
to the new subpass until a bit later when the job for the new subpass
has been settled). This means that we were doing the merge checks with
the previous subpass, not the current one.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
There are some texture operations (like mipmap query levels) that
doesn't require a sampler. In fact, you should ignore it. So we need
to take it into account when combining the
indexes. nir_tex_instr_src_index is returning a negative value to
identify that case, but as we are using a uint32_t to pack both values
(for convenience, easy to pack/unpack the hash table key), we just use
a uint value big enough to be a wrong sampler id.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
This requires that we emit a specific draw command and that we emit
the base instance if not zero right before the instanced draw call.
Notice that we were already doing this for instanced indexed draw
calls, so here we are only adding this for non-indexed draw calls.
We also need to flag whether the vertex shader reads the base instance
in the shader record (which it will if it reads uses gl_InstanceIndex,
as that is lowered in Vulkan to base_instance + instance_id).
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
OpenGL doesn't have the concept of individual texture and sampler, so
texture and sampler indexes have the same value. v3d compiler uses
this assumption, so for example, the texture info at the v3d key
include values that you need to use the texture format and the sampler
to fill (like the return_size).
One option would be to adapt the v3d compiler to handle both, but then
we would need to adapt to the lowerings it uses, like nir_lower_tex,
that also take the same assumption.
We deal with this on the Vulkan driver, by reassigning the texture and
sampler index to a combined one. We add a hash table to map the
combined texture idx and sampler idx to this combined idx, and a
simple array to the opposite map. On the driver we work with the
separate indices to fill up the data, while the v3d compiler works
with the combined one.
As mentioned, this is needed to properly fill up the texture return
size, so as we are here, we fix that. This gets tests like the
following working:
dEQP-VK.glsl.texture_gather.basic.2d.depth32f.base_level.level_2
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
We must update our check for whether the render area is tile-aligned for
each subpass, since the hardware will update tile sizes for each RCL.
Fixes:
dEQP-VK.renderpass.suballocation.attachment_allocation.roll.8
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
This is the same as the subpass start version, only that it won't
emit subpass clears. This is necessary when resuming a subpass
from a partial clear to make sure we don't try to clear subpass
attachments again.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
Since a meta partial clear starts a new render pass, we need to store
all state that can be changed with vkCmdBeginRenderPass.
Also, since the meta clear pipeline sets dynamic state, we also
have to restore that.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
The problem with this is that TLB clears always clear and store full
tiles, so if our render area is not perfectly aligned to tile boundaries
we end up clearing all pixels in tiles that are only partially covered.
In this scenario we have to avoid using TLB clears and instead fallback
to clearing by rendering a scissored quad in the clear color, like we do
for partial clears in vkCmdClearAttachments.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
There are some scenario where this won't happen and don't imply a bug.
For example, if we find a pipeline barrier, we will finish the current
job automatically and won't start a new one. There may be other
scenarios where we may want to do the same.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
And flag dirty scissor state if the render area is constraining the
current clip window, so that we emit a new clip window with the next
draw call.
Also, remove the early emission of a clip window for the render area
if we didn't have any scissor state. TLB clears ignore the clip
window, so this was doing nothing for us.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
This is achieved by rendering a quad in the clear color for each layer
of each attachment being cleared. Right now we emit each clear in a
separate job with a single attachment framebuffer, but in the future
we may be able to extend the solution to using multiple render targets
and clear multiple attachments with a single job.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
Right now shader variant update on the cmd_buffer is based on populate
a new key using the descriptor bounds, assuming that we would get one
final descriptor for any usage on the shader. But if the descriptors
are being bound with more that one call to CmdBindDescriptorSet, that
would not be true, as the first calls would not bind all the
descriptors. Right now this was raising an assert.
Now we allow that as possible, and for the case of checking variants,
we just stop it, and we don't clean up the SHADER_VARIANT flag.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
Specially after CmdBindDescriptorSets, it is likely that we would need
a new shader variant, like for example if sampler descriptor sets are
bound.
At that moment a new v3d key is populated, using as base the one used
at pipeline creation, so only cmd_buffer depending values are changed.
Then a new variant is requested. Note that internally it is handled
with a cache, so no new compilation will be done if not needed.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
So far, we were doing the compilation to qpu when the pipeline was
created (as part of vkCreateGraphicsPipeline).
But this would not be correct when some specific descriptors are
involved, like textures. For that case some nir lowerings depend on
the texture format, and that info is not available until the specific
descriptors are bound to the command buffer. In the same way, the same
command buffer with a given pipeline could get their descriptor bound
again.
So it would be needed to support compilation variants of the same
shader. So finally, the v3d_key would work as keys, as the variants
would be tracked with a hash table.
This commit introduces the new structures for that. What we were
building as the final qpu shader would become the initial default
variant for the pipeline. We are also saving the keys used at that
point, to avoid needing to fully regenerate them when a new variant is
created. Not just for performance, but also to avoid needing to track
the graphics pipeline create info structure.
The code to handle updating the current variant would be done on
following commits.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
v3dv_descriptor is going to be expanded with more data, so it doesn't
make sense anymore to handle a fake descriptor for the push
constants. Introducing a new struct, that is just a pair
bo/offset. Initially named v3dv_resource, as it could be the base to
reuse bos for different resources (like assembly bo)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
This fixes multi-layer vkCmdClearAttachments CTS tests. The underlying
problem here is that even though this command runs inside a render pass,
it is implemented as a separate job that emits its own RCL to program
render target color clears, so we should not emit the subpass RCL for it.
Fixes 250+ CTS tests (all but a1r5g5b5) in:
dEQP-VK.api.image_clearing.core.clear_color_attachment.cube_layers.*
dEQP-VK.api.image_clearing.core.clear_color_attachment.multiple_layers.*
dEQP-VK.api.image_clearing.core.clear_depth_stencil_attachment.multiple_layers.*
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
