These tags need to match up with what's actually described by the MFBD,
so check this. Once this is checked, since the type and contents of the
FBD are obvious from printing above, there's no need to explicitly mark
off the framebuffer line.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Minor fixups required to keep the prototypes matching and to remove
mention of retired enums.
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
v2: Pass through to oscreen rather than faking it (review from Marek).
Fixes: 0346b70083 ("gallium/screen: Add pipe_screen::resource_get_param")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Expose configs when allow_fp16_configs has been enabled and
DRI_LOADER_CAP_FP16 is set in the loader.
Also, make kms_swrast_dri respect format bpp, to allow for allocating
buffers wider than 32 bpp.
Make fp16 opt-in for gallium.
Signed-off-by: Kevin Strasser <kevin.strasser@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
rgb10 uses an 'if(allowed) continue' approach, do the same for rgba_ordering.
Signed-off-by: Kevin Strasser <kevin.strasser@intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
This should fix glDepthRangef issues. Eventually, something similar
should allow implementing the depth bounds test.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
This better matches all the other atomic intrinsics such as those for
SSBOs and shared variables where the sign is part of the intrinsic
opcode. Both generators (GLSL and SPIR-V) know the sign from the type
of the image variable or handle. In SPIR-V, signed min/max are separate
opcodes from unsigned.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
It's a legacy GL thing... we don't really need to handle it *right* now,
but we shouldn't crash..
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
This CAP controls a desktop-only extension. If the corresponding support
exists in the hardware, we don't know how to use it.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Subtle issue masked by how we emitted SET_VALUE jobs, but this case can
and does occur, so let's fix it.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Verify sizes / masks / etc against something logical to cull down the
trace space and automatically guard against a number of potential
hazards.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
While the algorithm for computing the header size has been correct for a
while, we used a major hack to conservatively guess the body size. Let's
scrap that and figure out the algorithm we actually need to use to be
bit-identical with what the hardware expects.
We do have to be careful to add the header size to total comptued BO
size.
It's not clear how big the polygon list needs to be in practice -- but
it has to be somewhat bigger than the polygon list itself. This needs
more investigation. If we size the polygon list exactly based on the
polygon_list_size field, we get faults like:
[ 1224.219886] panfrost ff9a0000.gpu: Unhandled Page fault in AS0 at VA 0x000000001BDE8000
Reason: TODO
raw fault status: 0x660003C3
decoded fault status: SLAVE FAULT
exception type 0xC3: TRANSLATION_FAULT_LEVEL3
access type 0x3: WRITE
source id 0x6600
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
This is a blob quirk; in so much as I know, the hardware doesn't care.
But we're trying to be bit-identical to take as much entropy out of
traces as possible, so let's introduce the quirk.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
The routines in this file have no dependency on Gallium. Let's share
them so they can be used for a theoretical future Vulkan driver or, more
immediately, consulted when tracing.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
To help make sure we are running tests in the ideal number of threads,
print load stats to make obvious when there's a problem with
utilization.
This will be specially useful when we run tests on a wider variety of
devices.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Some runners may be configured such that the qemu binary might not be
available by the time we need to start running commands within the
chroot.
So make sure that it's there to avoid suprising problems in that case.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
There's lots of locking changes going into the Panfrost kernel driver,
so better be prepared.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
A number of things can go wrong when building the rootfs from within a
non-native chroot, so make sure to print the bootstrap.log so we can
tell what's going on.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
It's able to run tests in parallel, fully utilizing the HW and
shortening considerable the time it takes.
Needed to disable tests in RK3288 for now because Volt doesn't support
armhf yet, though this should be fixed soon.
Tests are now run with --deqp-gl-config-name=rgba8888d24s8ms0, so we are
hitting a few more failures in tests that previously were being skipped.
The time to run the tests decreases from around 8 minutes to 1:45
minutes, allowing for extending coverage without increasing CI times too
much.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
An application quitting before the destroying its GL context and
binding a NULL context might still have a radeonsi compiler thread
running and potentially still accessing the types.
Therefore take a reference for the duration of the threads' lifetime.
v2: Only ref the glsl types, the builtins should be used by the time
shader data gets to a gallium driver.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
The compute paths in vl are a bit AMD-specific. For example, they (on
nouveau), try to use a BGRX8 image format, which is not supported.
Fixing all this is probably possible, but since the compute paths aren't
in any way better, it's difficult to care.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111213
Fixes: 9364d66cb7 (gallium/auxiliary/vl: Add video compositor compute shader render)
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
ra_get_best_spill_node is what other users of the mesa register
allocator use.
Switching to it now also fixes an infinite loop issue with ppir regalloc
with the ppir control flow patchset, and also provides a small gain over
the previous herusitic on number of spilled nodes testing with
shader-db.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
The SSE2 executor was removed in 4eb3225b38 ("Remove tgsi_sse2.")
Acked-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
This was fixed in 912ed84f83 ("tgsi: move to using vector for system
values.")
Acked-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
The implementation introduced in "tgsi_to_nir: be careful about not
losing any TGSI properties silently (v2)" updates all the TGSI properties,
but it didn't take into account that the shader_info structure uses a union
to store the different attributes for each shader stage.
Now we only update the attributes if they affect current shader stage,
avoiding to overwrite members of the union that should be overwritten.
This has created hundreds of regressions in v3d.
For example the TGSI_PROPERTY_VS_BLIT_SGPRS_AMD was overwritting the
same position used by TGSI_PROPERY_CS_FIXED_BLOCK_DEPTH.
Fixes: e300365197 ("tgsi_to_nir: be careful about not losing any TGSI properties silently (v2)")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
