Many entries in the dri2_format_table have _DRI_IMAGE_FORMAT_NONE as the
dri_format. Make the result of dri2_get_mapping_by_format a tad more
well-defined by returning NULL when this format is passed into it.
Cc: mesa-stable
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8663>
no border colors here either
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Drive-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8714>
we aren't using border colors here, so this should be fine (and more compatible)
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Drive-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8714>
It is currently a bitset on top of a uint64_t but there are already
more than 64 values. Change to use BITSET to cover all the
SYSTEM_VALUE_MAX bits.
Cc: mesa-stable
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Jesse Natalie <jenatali@microsoft.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Acked-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8585>
All uses are passing variables of either nir_var_shader_in or
nir_var_shader_out modes. Note that currently there are more than 64
system values, so the uint64_t wouldn't be enough anyway.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8585>
These are intermittent (~1/day), seem to be around GPU faults (so
hopefully will go away once we clean up piglit's fault errors), and are
probably also related to our vintage firmware. Until we can get new
hardware in the farm, just restart the flaked job.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8722>
On Fiji, the CTS image can cause a hang when these are enabled.
Let's enable them for Polaris and newer only, for now.
Gitlab: #4136
Fixes: 9f43b44bf0
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8646>
The function is very convenient for lowering any type of instruction
that can be easily filtered, but so far instructions that didn't return
a value were siletly ignored.
Fix this by
- not requiring a return value in the instruction
- add a new special return value from the lowering implementation
function to indicated that an instruction that doesn't have a
return value must be removed, and
- don't try to collect and replace uses in this case.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8177>
This adds a couple of jobs to execute piglit testsuite in VC4
(quick_shader and quick_gl profiles).
It is defined as a manual test as it takes time to execute them.
v2:
- Add more excluded tests (Eric)
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Acked-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8702>
It fits better with what other drivers has done.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Acked-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8702>
The script that monitors activity in the serial assumes that something
was wrong if it does not detect activity in 60 seconds, rebooting the
device and re-trying the test again.
While this timeout is enough for most cases, in some cases it is not
enough. For instance, when executing piglit testsuite it takes quite a
few time to generate the results after the test is done.
This allow to setup a custom timeout (`BM_POE_TIMEOUT`) in the proper
jobs.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Acked-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8702>
On GFX6, EOS events are always emitted with EVENT_WRITE_EOS.
On GFX7+, EOS events are emitted with EVENT_WRITE_EOS on the
graphics queue, and with RELEASE_MEM on the compute queue.
Fixes: 9c65f1f111 ("radv: synchronize Cmd{Set,Write}Event() using PS_DONE/CS_DONE events")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8710>
MSVC has an undocumented feature that can act as GCC weak functions.
Also fix warnings about returning a value from void functions.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7793>
In Vulkan, for some variable modes, the generated NIR will have derefs
pointing to resource index intrinsics instead of the variable. This
was letting nir_remove_dead_variables pass remove those variables,
which would lose information relevant for later passes after
spirv2nir.
Add a set to keep track of such variables and prevent them to be
removed when producing the NIR output.
Issue reported by Rhys.
Fixes: c4c9c780b1 ("spirv: Remove more dead variables")
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8706>
Fix defects reported by Coverity Scan.
member_not_init_in_gen_ctor: The compiler-generated constructor for this class does not initialize buf.
member_not_init_in_gen_ctor: The compiler-generated constructor for this class does not initialize svm.
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8623>
We can skip CCS ambiguate if followed by a fast clear within render
pass.
v2: (Jason)
- Check array layer as well since we only fast clear first layer and
first LOD.
- Don't drop fast clear check while doing resolve operation.
Fixes: d5849bc840 "anv: Skip HiZ and CCS ambiguates which preceed fast-clears"
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6988>
According to the BSpec page for MEDIA_VFE_STATE, on Gen12 platforms
"if a fused configuration has fewer threads than the native POR
configuration, the scratch space allocation is based on the number of
threads in the base native POR configuration". However we currently
use the subslice count from devinfo->num_subslices[0], which only
includes the subslices currently enabled by the platform fusing. This
leads to scratch space underallocation and occasional hangs.
The problem is likely to affect most Gen12 GPUs with less than 96 EUs.
GFXBench5 Aztec Ruins is able to reproduce the issue fairly reliably.
Fixes: 9e5ce30da7 "intel: fix the gen 12 compute shader scratch IDs"
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8636>
Fixes an issue with 3dmark caused by a shader that only writes mrt0 in a
renderpass that has two color buffers bound, resulting in mrt1 getting
random/undefined values.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8685>
these may be unset from the ctx before the draw command has completed,
so we need (more) references to prevent that
Fixes: 3f9a6d333b ("zink: export shader image caps using features")
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8627>
While invalidating the AUX-TT entries, we have to consider the surface
offset as well otherwise, we will end up invalidating another surface's
CCS portion.
For eg. when we have HiZ+CCS and STC_CCS enabled, both will use the CCS
portion allocated at the end of BO. While invalidating the CCS portion
of stencil buffer, we will end up invalidating the CCS portion that
belongs to the depth main surface and vice-versa, if the surface offset
is not considered.
Cc: mesa-stable
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/4123
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Acked-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8677>
