Here we use the NIR based builder to add everything to the resource
list execpt for SSO packed varyings. Since the details of those
varyings get lost during packing we leave the special handing to
the GLSL IR pass for now. In order to do this we add some bools
to the build resource list functions.
Using the NIR based resource list builder gets us a step closer to
using a native NIR based linker. It should also be faster than the
GLSL IR builder, one because the NIR optimisations should mean we
add less entries due to better optimisations, and two because nir
gives us better lists to work with and we don't need to walk the
entire IR to find the resources.
Ack-by: Alejandro Piñeiro <apinheiro@igalia.com>
This is where all the other uniform values are populated so it
makes much more sense here. Moving it will also allow us to better
share code between the NIR and GLSL IR resource list builders.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Currently the linker do all the work then check for the limits, which
means num_textures and num_images in shader_info may have to store more
than the limit. This breaks down now since shader_info was packed and
doesn't expect to store larger invalid values.
To fix this, pull the check before we set the counts in shader_info.
Add necessary plumbing to make sure we bail once those errors are
found.
Fixes: 84a1a2578d ("compiler: pack shader_info from 160 bytes to 96 bytes")
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Currently the linker do all the work then check for the limits, which
means num_ssbos and num_ubos in shader_info may have to store more
than the limit. This breaks down now since shader_info was packed and
doesn't expect to store larger invalid values.
To fix this, pull the check before we set the counts in shader_info.
One drawback of this approach is that for some cases we might not see
the collected errors from various stages, but bail as soon as a stage
breaks the limits.
Fixes: 84a1a2578d ("compiler: pack shader_info from 160 bytes to 96 bytes")
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
For radeonsi, we will prefer the NIR pass as it'll generate better code
(some index calculation and a single load vs. a load, then index
calculation, then another load) and oftentimes NIR optimization can kick
in and make all the access indices constant.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This function is confusingly also used to match interstage interfaces
as well as intrastage. In the interstage case it needs to avoid
comparing the precisions. This patch adds a parameter to specify
whether to take the precision into account or not so that it can be
used for both cases.
Reviewed-by: Eric Anholt <eric@anholt.net>
This greatly simplifies the code to calculate if we should add a
buffer to the resource list. This uses the spec rules and simple
math to decide if we should add the buffer rather than complex
string processing.
This patch refines a patch present in the ARB_gl_spriv merge
request for the NIR linker and applies it to the GLSL IR linker.
This is why we also move the function to the shared linker code,
because we will want to reuse the code for the NIR linker also.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Until now, we were only doing this when linking a SSO
program. However, nothing avoids linking a non SSO program which
doesn't have both a VS and FS. In those cases, we also need to report
the usual linking errors, if happening.
v2: Use a better name for the renamed function (Timothy).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
NV_compute_shader_derivatives allow selecting between two possible
arrangements (quads and linear) when calculating derivatives and
certain subgroup operations in case of Vulkan. So parse and propagate
those up to shader_info.h.
v2: Do not fail when ARB_compute_variable_group_size is being used,
since we are still clarifying what is the right thing to do here.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
'invariant' qualifier is propagated on variables which are used
to calculate other invariant variables, however when we are matching
variable's declarations we should take into account only explicitly
declared invariance because invariance propagation is an implementation
specific detail.
Thus new flag is added to ir_variable_data which indicates 'invariant'
qualifier being explicitly set in the shader.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100316
Fixes: 89b60492 ('glsl: Add a pass to propagate the "invariant" and
"precise" qualifiers')
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
On GLSL that info is set as a layout qualifier when redeclaring
gl_FragCoord, so somehow tied to a specific variable. But in practice,
they behave as a global of the shader. On ARB programs they are set
using a global OPTION (defined at ARB_fragment_coord_conventions), and
on SPIR-V using ExecutionModes, that are also not tied specifically to
the builtin.
This patch moves that info from nir variable and ir variable to nir
shader and gl_program shader_info respectively, so the map is more
similar to SPIR-V, and ARB programs, instead of more similar to GLSL.
FWIW, shader_info.fs already had pixel_center_integer, so this change
also removes some redundancy. Also, as struct gl_program also includes
a shader_info, we removed gl_program::OriginUpperLeft and
PixelCenterInteger, as it would be superfluous.
This change was needed because recently spirv_to_nir changed the order
in which execution modes and variables are handled, so the variables
didn't get the correct values. Now the info is set on the shader
itself, and we don't need to go back to the builtin variable to set
it.
Fixes: e68871f6a ("spirv: Handle constants and types before execution
modes")
v2: (Jason)
* glsl_to_nir: get the info before glsl_to_nir, while all the rest
of the info gathering is happening
* prog_to_nir: gather the info on a general info-gathering pass,
not on variable setup.
v3: (Jason)
* Squash with the patch that removes that info from ir variable
* anv: assert that OriginUpperLeft is true. It should be already
set by spirv_to_nir.
* blorp: set origin_upper_left on its core "compile fragment
shader", not just on some specific places (for this we added an
helper on a previous patch).
* prog_to_nir: no need to gather specifically this fragcoord modes
as the full gl_program shader_info is copied.
* spirv_to_nir: assert that we are a fragment shader when handling
this execution modes.
v4: (reported by failing gitlab pipeline #18750)
* state_tracker: update too due changes on ir.h/gl_program
v5:
* blorp: minor change after change on previous patch
* radeonsi: update due this change.
v6: (Timothy Arceri)
* prog_to_nir: remove extra whitespace
* shader_info: don't use :1 on origin_upper_left
* glsl: program.fs.origin_upper_left/pixel_center_integer can be
move out of the shader list loop
Replace calls to create hash tables and sets that use
_mesa_hash_pointer/_mesa_key_pointer_equal with the helpers
_mesa_pointer_hash_table_create() and _mesa_pointer_set_create().
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Eric Engestrom <eric@engestrom.ch>
Always match TCS outputs since they are shared by all invocations
within the patch and should not be converted to local variables.
This is one of the issues found in Downward.
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104297
Commit 27f1298b9d ("glsl/linker: validate attribute aliasing before optimizations")
forgot to complete the documentation.
Cc: Tapani Pälli <tapani.palli@intel.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Patch does a 'dry run' of assign_attribute_or_color_locations before
optimizations to catch cases where we have aliasing of unused attributes
which is forbidden by the GLSL ES 3.x specifications.
We need to run this pass before unused attributes may be removed and with
attribute binding information from program, therefore we re-use existing
pass in linker rather than attempt to write another one.
This fixes WebGL2 test 'gl-bindAttribLocation-aliasing-inactive' and
Piglit test 'gles-3.0-attribute-aliasing'.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106833
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Since out variables are copied from shader objects instruction
streams to linked shader instruction steam it should be cloned
at first to keep source instruction steam unaltered.
Fixes: 966a797e43 ("glsl/linker: Link all out vars from a shader
objects on a single stage")
Signed-off-by: Vadym Shovkoplias <vadym.shovkoplias@globallogic.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105731
Also there is no "OpenGL ES Shading Language 4.00" spec,
so change it to GLSL 4.00 spec.
Signed-off-by: Vadym Shovkoplias <vadym.shovkoplias@globallogic.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
>From Section 6.1.2 (Subroutines) of the GLSL 4.00 specification
"A program will fail to compile or link if any shader
or stage contains two or more functions with the same
name if the name is associated with a subroutine type."
v2:
- error out earlier (Tapani)
- style fixes (Iago)
Fixes:
* no-overloads.vert
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108109
Signed-off-by: Vadym Shovkoplias <vadym.shovkoplias@globallogic.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
From Section 4.6.4 (Invariance and Linkage) of the GLSL ES 1.0 specification
"The invariance of varyings that are declared in both the vertex and
fragment shaders must match. For the built-in special variables,
gl_FragCoord can only be declared invariant if and only if
gl_Position is declared invariant. Similarly gl_PointCoord can only
be declared invariant if and only if gl_PointSize is declared
invariant. It is an error to declare gl_FrontFacing as invariant.
The invariance of gl_FrontFacing is the same as the invariance of
gl_Position."
Fixes:
* glsl-pcoord-invariant.shader_test
* glsl-fcoord-invariant.shader_test
* glsl-fface-invariant.shader_test
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107734
Signed-off-by: Vadym Shovkoplias <vadym.shovkoplias@globallogic.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
and _mesa_bitcount_64 with util_bitcount_64. This fixes a build problem
in nir for platforms that don't have popcount or popcountll, such as
32bit msvc.
v2: - Fix additional uses of _mesa_bitcount added after this was
originally written
Acked-by: Eric Engestrom <eric.engestrom@intel.com> (v1)
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
During intra stage linking some out variables can be dropped because
it is not used in a shader with the main function. But these out vars
can be referenced on later stages which can lead to further linking
errors.
Signed-off-by: Vadym Shovkoplias <vadym.shovkoplias@globallogic.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105731
Instead of plain snprintf(). To fix the MSVC 2013 build.
Fixes: 6ff0c6f4eb ("gallium: move ddebug, noop, rbug, trace to auxiliary to improve build times")
Cc: Marek Olšák <marek.olsak@amd.com>
Cc: Brian Paul <brianp@vmware.com>
Cc: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
This includes:
* Move the defition of empty_uniform_block to linker_util.h
* Move find_empty_block (with a rename) to linker_util.h
* Refactor some code at linker.cpp to a new method at linker_util.h
(link_util_update_empty_uniform_locations)
So all that code could be used by the GLSL linker and the NIR linker
used for ARB_gl_spirv.
v2: include just "ir_uniform.h" (Timothy Arceri)
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
So it could be used by the GLSL and NIR linker.
v2: (Timothy Arceri)
* Moved from compiler to compiler/glsl
* Method renamed to link_util_add_program_resource
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
The prog->Shaders[i]->IsES check was accidentally removed causing
ES linking rules to be applied to desktop GLSL.
Fixes: 725b1a406d ("mesa/util: add allow_glsl_relaxed_es driconfig override")
This relaxes a number of ES shader restrictions allowing shaders
to follow more desktop GLSL like rules.
This initial implementation relaxes the following:
- allows linking ES shaders with desktop shaders
- allows mismatching precision qualifiers
- always enables standard derivative builtins
These relaxations allow Google Earth VR shaders to compile.
Reviewed-by: Dave Airlie <airlied@redhat.com>
This extension provides new GLSL built-in functions
beginInvocationInterlockARB() and endInvocationInterlockARB()
that delimit a critical section of fragment shader code. For
pairs of shader invocations with "overlapping" coverage in a
given pixel, the OpenGL implementation will guarantee that the
critical section of the fragment shader will be executed for
only one fragment at a time.
Signed-off-by: Plamena Manolova <plamena.manolova@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
The recent mtypes.h removal patches seems to have exposed a MSVC
issue where 'interface' is defined as a macro in an MSVC header file.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Neha Bhende <bhenden@vmware.com>
- remove mtypes.h from most header files
- add main/menums.h for often used definitions
- remove main/core.h
v2: fix radv build
Reviewed-by: Brian Paul <brianp@vmware.com>
According to GLSL ES 3.2 spec, see table in 9.2.1 "Linked Shaders"
section, the precision qualifier should match for uniform variables.
This also applies to previous GLSL ES 3.x specs.
This 'if' checks the condition for uniform variables, while for UBOs
it is checked in link_interface_blocks.cpp.
Fixes: b50b82b8a5
("glsl/es31: precision qualifier doesn't need to match in shader interface block members")
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
According with OpenGL GLSL 3.20 spec, section 4.3.9:
"It is a link-time error if any particular shader interface
contains:
- two different blocks, each having no instance name, and each
having a member of the same name, or
- a variable outside a block, and a block with no instance name,
where the variable has the same name as a member in the block."
This fixes a previous commit 9b894c8 ("glsl/linker: link-error using the
same name in unnamed block and outside") that covered this case, but
did not take in account that precision qualifiers are ignored when
comparing blocks with no instance name.
With this commit, the original tests
KHR-GL*.shaders.uniform_block.common.name_matching keep fixed, and also
dEQP-GLES31.functional.shaders.linkage.uniform.block.differing_precision
regression is fixed, which was broken by previous commit.
v2: use helper varibles (Matteo Bruni)
Fixes: 9b894c8 ("glsl/linker: link-error using the same name in unnamed block and outside")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104668
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104777
CC: Mark Janes <mark.a.janes@intel.com>
CC: "18.0" <mesa-stable@lists.freedesktop.org>
Tested-by: Matteo Bruni <matteo.mystral@gmail.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
According with OpenGL GLSL 4.20 spec, section 4.3.9, page 57:
"It is a link-time error if any particular shader interface
contains:
- two different blocks, each having no instance name, and each
having a member of the same name, or
- a variable outside a block, and a block with no instance name,
where the variable has the same name as a member in the block."
This means that it is a link error if for example we have a vertex
shader with the following definition.
"layout(location=0) uniform Data { float a; float b; };"
and a fragment shader with:
"uniform float a;"
As in both cases we refer to both uniforms as "a", and thus using
glGetUniformLocation() wouldn't know which one we mean.
This fixes KHR-GL*.shaders.uniform_block.common.name_matching.
v2: add fixed tests (Tapani)
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
If MaxAttribs were ever raised to 32, undefined behavior would occur.
We had already gone to the effort (albeit incorrectly) handle this in
one case, so fix them all.
CID: 1369628
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
If max_index were ever 32, the linker would have marked all 32
locations as invalid instead of marking none of them as invalid. It's
a good thing the maximum value actually set by any driver for
MaxAttribs is 16.
Found by inspection while investigating CID 1369628.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Intel was the only user and now NIR can do the lowering.
v2: do not try to handle it as a system value directly for the SPIR-V
path. In GL we rather handle it as a uniform like we do for the
GLSL path (Jason).
v3: drop LowerTESPatchVerticesIn as well (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Without this, the SPIR-V generator has to deal with a bunch of junk
like:
(swiz z (swiz xxx (swiz x (var_ref packed:binormal.z,light_dir))))
It seems better to cull that stuff out than to add code to deal with
it. The problem is the way swizzles to and from scalars have to be
handled in SPIR-V.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Thomas Helland <thomashelland90@gmail.com>
This turned out to be a dead end, it is much easier and less error
prone to just cache the IR used by the drivers backend e.g. TGSI or
NIR.
Cc: "17.2 17.3" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This patch is mostly a patch done by Ilia Mirkin.
It fixes KHR-GL45.enhanced_layouts.varying_structure_locations.
v2: fix locations for TCS/TES/GS inputs and outputs (Ilia)
CC: Ilia Mirkin <imirkin@alum.mit.edu>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103098
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Commit 259fc50545 added linker error for
mismatching uniform precision, as required by GLES 3.0 specification and
conformance test-suite.
Several Android applications, including Forge of Empires, have shaders
which violate this rule, on a dead varying that will be eliminated.
The problem affects a big number of applications using Cocos2D engine
and other GLES implementations accept this, this poses a serious
application compatibility issue.
Starting from GLSL ES 3.0, declarations with conflicting precision
qualifiers are explicitly prohibited. However GLSL ES 1.00 does not
clearly specify the behavior, except that
"Uniforms are defined to behave as if they are using the same storage in
the vertex and fragment processors and may be implemented this way.
If uniforms are used in both the vertex and fragment shaders, developers
should be warned if the precisions are different. Conversion of
precision should never be implicit."
The word "used" is not clear in this context and might refer to
1) declared (same as GLES 3.x)
2) referred after post-processing, or
3) linked after all optimizations are done.
Looking at existing applications, 2) or 3) seems to be widely adopted.
To avoid compatibility issues, turn the error into a warning if GLSL ES
version is lower than 3.0 and the data is dead in at least one of the
shaders.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97532
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This effectively factorizes a couple of similar routines.
v2 (Neil Roberts): Non-trivial rebase on master
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Eduardo Lima Mitev <elima@igalia.com>
Signed-off-by: Neil Roberts <nroberts@igalia.com>
