From Vulkan spec:
"descriptorCount is the number of descriptors contained in the binding,
accessed in a shader as an array. If descriptorCount is zero this
binding entry is reserved and the resource must not be accessed from
any stage via this binding within any pipeline using the set layout."
Fixes:
dEQP-VK.binding_model.descriptor_update.empty_descriptor.uniform_buffer
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable@lists.freedesktop.org
ARB_ubo requires 12 UBOs (per stage) at least, but this limit has been
raised by GL 4.3 to 14, so don't advertize GL 4.3 without it (only checking
the vertex stage since all drivers probably have the same limit anyway for
other stages). (piglit has minmax tests for that kind of thing, but they go
only up to 3.3, so this won't really be noticed.)
I think this currently should not affect any driver - r600 until very
recently only supported 12 but now advertizes 14 too.
Reviewed-by: Brian Paul <brianp@vmware.com>
We've seen some problems internally due to macro redefinition.
Fix this by adding HAVE_FUNC_ATTRIBUTE_NORETURN to c99_compat.h,
and defining it for msvc.
And avoid redefinition just in case.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
If the number of instances hasn't changed and we've already
emitted it, don't emit it again.
If the vertex shader is the same and the first_instance, vertex_offset
haven't changed don't emit them again.
This increases the fps in GL_vs_VK -t 1 -m -api vk from around 40
to around 60 here, it may not impact anything else.
Dieter also reported smoketest going from 1060->1200 fps.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Running dota2 since the below commit crashes with an llvm assert.
Trim the vector like the other user. This possible could also be
avoided by not padding inside the load vec3->vec4.
Fixes: 41c36c4549 (amd/common: use ac_build_buffer_load() for emitting UBO loads)
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Otherwise this could be undefined in the egl directory.
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
This simplifies the build by removing the need to link targets against
libsensors.
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
This creates two new internal dependencies, idep_nir_headers and
idep_nir. The former encapsulates the generation of nir_opcodes.h and
nir_builder_opcodes.h and adding src/compiler/nir as an include path.
This ensures that any target that needs nir headers will have the
includes and that the generated headers will be generated before the
target is build. The second, idep_nir, includes the first and
additionally links to libnir.
This is intended to make it easier to avoid race conditions in the build
when using nir, since the number of consumers for libnir and it's
headers are quite high.
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
For things like:
loop
x = func()
list += x
end
just do:
loop
list += func()
end
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Don't use intermediate variables, use consistent whitespace.
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
These were added after adderlib was mesonified, but it still good to use
them instead of open coding them.
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Currently the meosn build has a mix of two styles:
arg : [foo, ...
bar],
and
arg : [
foo, ...,
bar,
]
For consistency let's pick one. I've picked the later style, which I
think is more readable, and is more common in the mesa code base.
v2: - fix commit message
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
We already had to switch all of the W types to UW to prevent issues
with vector immediates on gen10. We may as well use unsigned types
everywhere.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Gen 10 has a strange hardware bug involving V immediates with W types.
It appears that a mov(8) g2<1>W 0x76543210V will actually result in g2
getting the value {3, 2, 1, 0, 3, 2, 1, 0}. In particular, the bottom
four nibbles are repeated instead of the top four being taken. (A mov
of 0x00003210V yields the same result.) This bug does not appear in any
hardware documentation as far as we can tell and the simulator does not
implement the bug either.
Commit 6132992cdb was mostly a no-op
except that it changed the type of the subgroup invocation from UW to W
and caused us to tickle this bug with basically every compute shader
that uses any sort of invocation ID (which is most of them). This is
also potentially an issue for geometry shader input pulls and SampleID
setup. The easy solution is just to change the few places where we use
a vector integer immediate with a W type to use a UW type.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
Fixes: 6132992cdb
Without this we end up with the llvm error message:
"Both operands to a binary operator are not of the same type!"
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Without this we end up with the llvm error message:
"Both operands to a binary operator are not of the same type!"
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Without this we end up with the llvm error message:
"Both operands to a binary operator are not of the same type!"
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Per spec:
"Additionally, exporting a fence payload to a handle with copy transference has the same side effects
on the source fence’s payload as executing a fence reset operation. If the fence was using a
temporarily imported payload, the fence’s prior permanent payload will be restored."
And similar for semaphores:
"Additionally, exporting a semaphore payload to a handle with copy transference has the same side
effects on the source semaphore’s payload as executing a semaphore wait operation. If the
semaphore was using a temporarily imported payload, the semaphore’s prior permanent payload
will be restored."
Fixes: 42bc25a79c "radv: Advertise sync fd import and export."
Reviewed-by: Dave Airlie <airlied@redhat.com>
More Coffee Lake PCI IDs have been added to the spec.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Some cases weren't handled, such as stride 4 which is needed for 64-bit
operations. Presumably fixes the assertion failure mentioned in commit
2d04572038 (Revert "i965/fs: Use align1 mode on ternary instructions
on Gen10+") but who can really say since the commit neglected to list
any of them!
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
After executing a secondary command buffer, we need to update certain
state on the primary command buffer to reflect changes by the secondary.
Otherwise subsequent commands may not have the correct state set.
This fixes various issues (rendering errors, GPU hangs) seen after
executing secondary command buffers in some cases.
v2 (Jason Ekstrand):
- Reset to invalid values instead of pulling from the secondary
- Change the comment to be more descriptive
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: mesa-stable@lists.freedesktop.org
anv_extensions usage from anv_icd was bringing the unwanted dependency
of mako templates for the latter. We don't want that since it will
force the dependency even for distributable tarballs which was not
needed until now.
Jason suggested this approach.
v2: Patch simplification (Jason).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104551
Fixes: 0ab04ba979 ("anv: Use python to generate ICD json files")
Cc: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
"The maxDescriptorSet* limit is n times the corresponding
maxPerStageDescriptor* limit, where n is the number of shader stages
supported by the VkPhysicalDevice. If all shader stages are supported,
n = 6 (vertex, tessellation control, tessellation evaluation,
geometry, fragment, compute)."
Fixes:
dEQP-VK.api.info.device.properties
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Fixes the follow test for radeonsi nir:
tests/spec/arb_tessellation_shader/execution/quads.shader_test
Also stops 8 other tests from crashing, they now just fail e.g.
tcs-output-array-float-index-rd-after-barrier.shader_test
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
If they were promoted from inputs/outputs, they could have a
non-zero value left over, which messed with our store handling.
Fixes: 06f05040eb "radv: Link shaders."
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Many of the functions declared in tgsi_build.h return structs (not struct
pointers). Therefore the full struct definitions are needed to avoid
warnings or errors:
In file included from src/gallium/drivers/nouveau/codegen/nv50_ir_from_tgsi.cpp:23:
external/mesa3d/src/gallium/auxiliary/tgsi/tgsi_build.h:47:1: error: 'tgsi_build_header' has C-linkage specified, but returns incomplete type 'struct tgsi_header' which could be incompatible with C [-Werror,-Wreturn-type-c-linkage]
This error shows up on Android builds using clang and -Werror.
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Rob Herring <robh@kernel.org>
BuilderSWR::swr_gs_llvm_fetch_input() (and consequently
swr_gs_llvm_fetch_input()), did not handle the case where
is_vindex_indirect or is_aindex_direct is set.
Implement it, using the code in draw_llvm.c as a guideline.
Fixes the following piglit tests:
dynamic_input_array_index (crash)
gs-input-array-vec4-index-rd
vs-output-array-vec4-index-wr-before-gs
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
v2: move those helpers to the header and use static inline
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> (v1)
This is unused because it's for libGL/libEGL, not drivers.
v2: i965 was wrong, because it used dri_util instead of its own config.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Using a gather for elements less than 32-bits in size can cause
pagefaults when loading the last elements in a page-aligned-sized
buffer.
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
If MaxAttribs were ever raised to 32, undefined behavior would occur.
We had already gone to the effort (albeit incorrectly) handle this in
one case, so fix them all.
CID: 1369628
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
If max_index were ever 32, the linker would have marked all 32
locations as invalid instead of marking none of them as invalid. It's
a good thing the maximum value actually set by any driver for
MaxAttribs is 16.
Found by inspection while investigating CID 1369628.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
All cases where the result could be non-visit_continue would have
already returned.
CID: 401351, 1224465, 1224466
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
None of these are necessary because result->type is the only thing used
outside the giant switch-statement.
CID: 1230983, 1230984
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
