This will be useful for pulling constants in device bound shaders. A64
allows us to put the constants anywhere.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32895>
Now using the same model as the compute shader.
As a result we temporarily disable the use of the Inline register for
providing push constants on Task & Mesh shaders. Since that register
is also available on the compute shader we'll try to find a way to use
the same mechanism for all 3 shaders in another MR and bring back that
optimization.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32895>
Starting in Xe3, there's a variant of SEND that take the
register numbers from the ARF scalar register, and don't
require them to be contiguous. The new opcode added here
represents that kind of SEND.
To make the original sources still reachable, we keep them
around during the IR, just ignoring them at generator time.
This allow software scoreboard to properly reason the
dependencies without trying to decode the contents of ARF
scalar register being used.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Lionel Landwerlin <None>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32410>
This limits the address register to simple cases inside a block.
Validation ensures that the address register is only written once and
read once.
Instruction scheduling makes sure that instructions using the address
register in the generator are not scheduled while there is an usage of
the register in the IR.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28199>
We want to reuse the brw::nr field as a virtual address register
identifer. So we can't use brw::file=ARF brw::nr=ADDRESS.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28199>
The push_constant_loc[] array is always an identity mapping these days,
so it's kind of pointless. Just use the original uniform number and
skip the unnecessary "remap" step. With that gone, and shrinking UBO
ranges gone, assign_constant_locations() is now empty and can be removed
as well.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32841>
Now that we never shrink ranges in the backend, we never lower push
constants to pull constants late in the backend either. get_pull_loc
will never return true, and so all of brw_lower_constant_loads becomes
a noop.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32841>
Back in the bad old days (vec4?) we had a bunch of smarts in the backend
to dead code eliminate unused vector components and re-pack regular
uniforms, so we really couldn't decide how much data we were pushing
until very late in the backend. Nowadays we have none of that - we do
all of our elimination and packing in NIR. anv shrinks ranges to deal
with Vulkan API push constants, and iris treats everything as a UBO and
as of the previous commit will also shrink appropriately.
So we don't need to do this anymore...which will let us simplify quite
a bit of code.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32841>
No shader-db changes on any Intel platform.
v2: Fix for Xe2.
v3: Rework the way that we determine that an intrinsic can actually be
convergent. This will now depend on whether or not the important
sources have previously be determined to be convergent. Fixes
intermitent failures in some test cases (including
dEQP-VK.spirv_assembly.instruction.graphics.16bit_storage.push_constant_float_16_to_32.scalar_frag).
v4: s/the it/it/ in a comment. Noticed by Ken.
fossil-db:
No fossil-db changes on Lunar Lake.
Meteor Lake and DG2 had similar results. (Meteor Lake shown)
Totals:
Instrs: 152743449 -> 152743161 (-0.00%)
Cycle count: 17399179660 -> 17399193488 (+0.00%)
Totals from 144 (0.02% of 633314) affected shaders:
Instrs: 5936 -> 5648 (-4.85%)
Cycle count: 51616 -> 65444 (+26.79%)
Tiger Lake, Ice Lake, and Skylake had similar results. (Tiger Lake shown)
Totals:
Instrs: 150646195 -> 150645907 (-0.00%)
Cycle count: 15618427818 -> 15618428942 (+0.00%)
Totals from 144 (0.02% of 632567) affected shaders:
Instrs: 6218 -> 5930 (-4.63%)
Cycle count: 39968 -> 41092 (+2.81%)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/29884>
In SIMD16 and SIMD32, storing convergent values in full 16- or
32-channel registers is wasteful. It wastes register space, and in most
cases on SIMD32, it wastes instructions. Our register allocator is not
clever enough to handle scalar allocations. It's fundamental unit of
allocation is SIMD8. Start treating convergent values as SIMD8.
Add a tracking bit in brw_reg to specify that a register represents a
convergent, scalar value. This has two implications:
1. All channels of the SIMD8 register must contain the same value. In
general, this means that writes to the register must be
force_writemask_all and exec_size = 8;
2. Reads of this register can (and should) use <0,1,0> stride. SIMD8
instructions that have restrictions on source stride can us <8,8,1>.
Values that are vectors (e.g., results of load_uniform or texture
operations) will be stored as multiple SIMD8 hardware registers.
v2: brw_fs_opt_copy_propagation_defs fix from Ken. Fix for Xe2.
v3: Eliminte offset_to_scalar(). Remove mention of vec4 backend in
brw_reg.h. Both suggested by Caio. The offset_to_scalar() change
necessitates some trickery in the fs_builder offset() function, but I
think this is an improvement overall. There is also some rework in
find_value_for_offset to account for the possibility that is_scalar
sources in LOAD_PAYLOAD might be <8;8,1> or <0;1,0>.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/29884>
This isn't used now, but future commits will add uses. Doing this as a
separate commit removes a lot of "just typing" churn from commits that
have real changes to review.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/29884>
Almost all cases now handled with default arguments. The only real
extra work that was being done was pushed to the client code in
debug_optimizer().
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32596>
In this case, num_sources is bigger than this->sources, so if we loop
up to num_sources (instead of this->sources) we'll end up reading past
the end of old_src[]. Only copy up to what we originally had.
This was found by code inspection, I'm not aware of any applications
failing due to the lack of this patch.
Fixes: d9e737212d ("intel/brw: Add a src array for the common case in fs_inst")
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32600>
Moving it to intel_shader_enums.h
The plan is to make it visible to OpenCL shaders.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32329>
Add opcodes for VOTE_ALL, VOTE_ANY and VOTE_EQUAL. The first two
are also used for the quad variants. Move their lowering from
NIR conversion to brw_lower_subgroup_ops.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/31029>
This intrinsic was initially dedicated to mesh/task shaders, but the
mechanism it exposes also exists in the compute shaders on Gfx12.5+.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/31508>
This predicate at the moment is only relevant during register
allocation, so move it there and the code can ignore virtual
instructions that were already lowered previously.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30496>
The general idea is to be able to validate that certain instructions
were lowered and certain restrictions were already handled. Passes can
now assert their expectations, i.e. if a pass is mean to run after
certain lowerings or not.
The actual phases are a initial stab and as we re-organized the passes,
we may remove/add phases.
This commit just add some phase steps, later commits will make use of
them.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30496>
These have now been replaced by the MEMORY_*_LOGICAL opcodes.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Acked-by: Rohan Garg <rohan.garg@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30828>
This is a new unified set of opcodes for memory access loosely patterned
after the new LSC-style data port messages introduced on Alchemist GPUs.
Rather than creating an opcode for every type of memory access, it has
only three opcodes: load, store, and atomic. It has various sources to
indicate the rest:
- Binding type (raw pointer, pointer to surface state, or BT index)
- Address size (A64, A32, A16)
- Data size (bit size, number of components)
- Opcode (atomic opcode, or LOAD/STORE vs. LOAD_CMASK/STORE_CMASK)
- Mode (typed vs. untyped vs. shared-local vs. scratch)
- Address (and its dimensionality)
- Data (0 for loads, 1 for stores, 2 for atomics)
- Whether we want block access
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Reviewed-by: Rohan Garg <rohan.garg@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30828>
The intention of inst->is_partial_write() is that it should return true
when any REG_SIZE (32B) chunk of inst's destination is written but not
fully overwritten. This can be used to tell whether inst combines new
data with existing data, or screens off any previous writes, so the old
values are no longer required.
The existing (exec_size * brw_type_size_bytes(this->dst.type) < 32)
check doesn't work in a number of cases. For example, LSC block loads
have exec_size == 1 and force_writemask_all set, but may write multiple
full registers of data. (Currently, we only see them with exec_size 1
after logical-send-lowering, so our SHADER_OPCODE_SEND special case
was covering those.) We had also special cased UNDEF.
Instead, we can simply check:
1. Predication
2. !inst->dst.contiguous()
3. inst->dst.offset % REG_SIZE != 0
4. inst->size_written % REG_SIZE != 0
We had the first three already, but #4 is new. If either #3 or #4
are true, then that implies there is a REG_SIZE chunk of the destination
which is written, but not entirely written, so it's a partial write.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Reviewed-by: Rohan Garg <rohan.garg@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30828>
The specific pattern from the unit test was observed in ray tracing
trampoline shaders.
v2: Refactor the is_raw_move tests out to a utility function. Suggested
by Ken.
v3: Fix a regression caused by being too picky about source
modifiers. This was introduced somewhere between when I did initial
shader-db runs an v2.
v4: Fix typo in comment. Noticed by Caio.
shader-db:
All Intel platforms had similar results. (Meteor Lake shown)
total instructions in shared programs: 19734086 -> 19733997 (<.01%)
instructions in affected programs: 135388 -> 135299 (-0.07%)
helped: 76 / HURT: 2
total cycles in shared programs: 916290451 -> 916264968 (<.01%)
cycles in affected programs: 41046002 -> 41020519 (-0.06%)
helped: 32 / HURT: 29
fossil-db:
Meteor Lake, DG2, and Skylake had similar results. (Meteor Lake shown)
Totals:
Instrs: 151531355 -> 151513669 (-0.01%); split: -0.01%, +0.00%
Cycle count: 17209372399 -> 17208178205 (-0.01%); split: -0.01%, +0.00%
Max live registers: 32016490 -> 32016493 (+0.00%)
Totals from 17361 (2.75% of 630198) affected shaders:
Instrs: 2642048 -> 2624362 (-0.67%); split: -0.67%, +0.00%
Cycle count: 79803066 -> 78608872 (-1.50%); split: -1.75%, +0.25%
Max live registers: 421668 -> 421671 (+0.00%)
Tiger Lake and Ice Lake had similar results. (Tiger Lake shown)
Totals:
Instrs: 149995644 -> 149977326 (-0.01%); split: -0.01%, +0.00%
Cycle count: 15567293770 -> 15566524840 (-0.00%); split: -0.02%, +0.01%
Spill count: 61241 -> 61238 (-0.00%)
Fill count: 107304 -> 107301 (-0.00%)
Max live registers: 31993109 -> 31993112 (+0.00%)
Totals from 17813 (2.83% of 629912) affected shaders:
Instrs: 3738236 -> 3719918 (-0.49%); split: -0.49%, +0.00%
Cycle count: 4251157049 -> 4250388119 (-0.02%); split: -0.06%, +0.04%
Spill count: 28268 -> 28265 (-0.01%)
Fill count: 50377 -> 50374 (-0.01%)
Max live registers: 470648 -> 470651 (+0.00%)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30251>
If there are no uniforms to push, don't emit the AND or invalidate the
shader analysis. This affects only compute shaders.
Not a significant impact since lots of shaders end up pushing
uniforms. Fossil-db numbers (restricted to compute pipelines only) for DG2
```
Totals:
Instrs: 3071016 -> 3070894 (-0.00%)
Cycle count: 8320268863 -> 8320264519 (-0.00%)
Totals from 122 (2.70% of 4520) affected shaders:
Instrs: 10675 -> 10553 (-1.14%)
Cycle count: 2060003 -> 2055659 (-0.21%)
```
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30631>
We don't actually need to extend g0's live range to the EOT message
generally - most messages that end a shader are headerless. The main
implicit use of g0 is for constructing scratch headers. With the last
two patches, we now consider scratch access that may exist in the IR
and already extend the liveness appropriately.
There is one remaining problem: spilling. The register allocator will
create new scratch messages when spilling a register, which need to
create scratch headers, which need g0. So, every new spill or fill
might extend the live range of g0, which would create new interference,
altering the graph. This can be problematic.
However, when compiling SIMD16 or SIMD32 fragment shaders, we don't
allow spilling anyway. So, why not use allow g0? Also, when trying
various scheduling modes, we first try allocation without spilling.
If it works, great, if not, we try a (hopefully) less aggressive
schedule, and only allow spilling on the lowest-pressure schedule.
So, even for regular SIMD8 shaders, we can potentially gain the use
of g0 on the first few tries at scheduling+allocation.
Once we try to allocate with spilling, we go back to reserving g0
for the entire program, so that we can construct scratch headers at
any point. We could possibly do better here, but this is simple and
reliable with some benefit.
Thanks to Ian Romanick for suggesting I try this approach.
fossil-db on Alchemist shows some more spill/fill improvements:
Totals:
Instrs: 149062395 -> 149053010 (-0.01%); split: -0.01%, +0.00%
Cycles: 12609496913 -> 12611652181 (+0.02%); split: -0.45%, +0.47%
Spill count: 52891 -> 52471 (-0.79%)
Fill count: 101599 -> 100818 (-0.77%)
Scratch Memory Size: 3292160 -> 3197952 (-2.86%)
Totals from 416541 (66.59% of 625484) affected shaders:
Instrs: 124058587 -> 124049202 (-0.01%); split: -0.01%, +0.01%
Cycles: 3567164271 -> 3569319539 (+0.06%); split: -1.61%, +1.67%
Spill count: 420 -> 0 (-inf%)
Fill count: 781 -> 0 (-inf%)
Scratch Memory Size: 94208 -> 0 (-inf%)
Witcher 3 shows a 33% reduction in scratch memory size, for example.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30319>
