This can be useful to measure whether memory access optimizations are
having the desired effect. For example, we might see a reduction in
image loads/stores, or constant buffer loads. We can already see this
in cycle estimates to some extent, but this is a more direct approach,
minus a lot of the noise of random scheduler shuffling.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Apparently the ts_request_type and ts_resource_select thread spawner
message descriptor bits were removed from the hardware at least since
ICL. Drop them in order to avoid assertion failures on Gen12+
platforms which don't have any encoding for this. On Gen9+ these are
probably just ignored by the hardware, so this is unlikely to have had
any functional implications prior to Gen12.
v2: Mark TS message fields as non-existing in brw_inst.h on ICL. (Caio)
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
The WAIT instruction has been removed, but SYNC.bar can be used
instead to wait for a notification on n0.0.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewers are encouraged to audit the code generation pass
independently for the case I missed some potential data hazard or new
code has been added in the meantime.
v2: Add SYNC instruction to cr0 workaround in brw_float_controls_mode().
v3: Drop likely redundant (and potentially harmful) RegDist SWSB
annotation from ce0 read in brw_find_live_channel() (Caio).
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
A future lowering pass will simulate the same behavior originally
provided by NoDDChk/NoDDClr at the IR level by using appropriate SWSB
annotations.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The new SEND instruction behaves like the former SENDS instruction.
The original single-payload SEND instruction is gone.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The SEND instruction is now four-source. The descriptor is no longer
part of source 1, so avoid touching it to avoid corruption while
initializing the descriptor.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We can't really handle it in the little-core 64-bit case but it's not
really needed there. Where we really want this is for when we need to
do 16 -> 8-bit conversions.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
During generate_shuffle(), when we use byte sized registers we end up
with a destination stride of 2. We don't take the stride into
consideration when selecting the group offset for the last MOV
operation, which means we end up moving things to the wrong place,
leaving the last few channels untouched. Take the destination stride
in consideration so we don't miss the last channels.
v2: Assert this is not necessary for the IVB special case (Jason).
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
The current code can create functions with a width of 32, which is not
supported by our hardware. Add some code to simplify how we express
what we want and prevent such cases.
For some unknown reason, all the tests I could run seem to work even
with these unsupported MOVs.
Fixes: b0858c1cc6 "intel/fs: Add a couple of simple helper opcodes"
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
There are cases where we try to generate registers with a stride of
32, while the hardware maximum is just 16. This happens, for example,
when using 8 bit integers on SIMD32. This results in a crash because
the variable 'width' has a value of 32:
../../src/intel/compiler/brw_reg.h:550: brw_reg brw_vecn_reg(unsigned
int, brw_reg_file, unsigned int, unsigned int): Assertion `!"Invalid
register width"' failed.
This change prevents the crash and makes the tests pass.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Before this commit, we had only FPRoundingMode decoration (the per
instruction one) that is applied during the SPIR-V handling. In
vtn_alu we find out the rounding mode, and generate the code
accordingly that later will be used to look for the respective
nir_op_f2f16_{rtz,rtne}.
Per-instruction gets prioritized because we make them explicit
conversions (with RTZ or RTNE nir opcodes) and they will override the
default execution mode defined with float controls. However, we need
to come back to the mode defined by float controls after the execution
of the FP Rounding instruction.
Therefore, the new SHADER_OPCODE_FLOAT_CONTROL_MODE opcode will be
used to set the default rounding mode and denorms treatment in the
whole shader while the pre-existent SHADER_OPCODE_RND_MODE, will be
used as prioritized rounding mode in a per-instruction basis.
v2:
- Fix bug in defining BRW_CR0_FP_MODE_MASK.
v3:
- Update comment (Caio).
v4:
- Split the patch into the helper and the new opcode (this
one) (Caio).
v5:
- Add an explanation on the actual purpose and priority of the newly
introduced opcode in the commit log (Caio).
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
v2:
- Fix bug in defining BRW_CR0_FP_MODE_MASK.
v3:
- Update comment (Caio).
v4:
- Split the patch into the helper (this one) and the new
opcode (Caio).
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
This reverts commit c0504569ea. Now that
we're doing interpolation lowering in NIR, we can continue to stride the
FS input registers directly in the brw_fs_nir code like we did before.
This fixes SIMD32 fragment shaders which broke because lower_simd_width
depended on the 0 stride to split PLN instructions correctly.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
This commit is all annoying plumbing work which just adds support for a
new brw_compile_stats struct. This struct provides a binary driver
readable form of the same statistics we dump out to stderr when we
INTEL_DEBUG is set with a shader stage.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
When dumping shader's assembly with INTEL_DEBUG=vs,tcs,...
sha1 of the resulting assembly is also printed, having environment
variable INTEL_SHADER_ASM_READ_PATH present driver will try to
load a "%sha1%.bin" file from the path and substitute current
assembly with the one from the file.
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The issue here was discovered by a set of Vulkan CTS tests:
dEQP-VK.glsl.derivate.*.dynamic_*
These tests use ballot ops to construct a branch condition that takes
the same path for each 2x2 quad but may not be uniform across the whole
subgroup. They then tests that derivatives work and give the correct
value even when executed inside such a branch. Because the derivative
isn't executed in uniform control-flow and the values coming into the
derivative aren't smooth (or worse, linear), they nicely catch bugs that
aren't uncovered by simpler derivative tests.
Unfortunately, these tests require Vulkan and the equivalent GL test
would require the GL_ARB_shader_ballot extension which requires int64.
Because the requirements for these tests are so high, it's not easy to
test on older hardware and the bug is only proven to exist on gen7;
gen4-6 are a conjecture.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Matt Turner <mattst88@gmail.com>
Line wrap some awfully long lines while we are here.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
It'll grow further, and we'd like to avoid adding an additional
parameter to fs_generator() for each new piece of data.
v2 (idr): Rebase on 17 months. Track a visitor instead of a cfg.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Gen11 SLM is not on L3 anymore, so now the hardware has two separate
fences. Add a way to control which fence types to use.
At this time, we don't have enough information in NIR to control the
visibility of the memory being fenced, so for now be conservative and
assume that fences will need a stall. With more information later
we'll be able to reduce those.
Fixes Vulkan CTS tests in ICL:
dEQP-VK.memory_model.message_passing.core11.u32.coherent.fence_fence.atomicwrite.device.payload_nonlocal.workgroup.guard_local.buffer.comp
dEQP-VK.memory_model.message_passing.core11.u32.coherent.fence_fence.atomicwrite.device.payload_local.buffer.guard_nonlocal.workgroup.comp
dEQP-VK.memory_model.message_passing.core11.u32.coherent.fence_fence.atomicwrite.device.payload_local.image.guard_nonlocal.workgroup.comp
dEQP-VK.memory_model.message_passing.core11.u32.coherent.fence_fence.atomicwrite.workgroup.payload_local.buffer.guard_nonlocal.workgroup.comp
dEQP-VK.memory_model.message_passing.core11.u32.coherent.fence_fence.atomicwrite.workgroup.payload_local.image.guard_nonlocal.workgroup.comp
The whole set of supported tests in dEQP-VK.memory_model.* group
should be passing in ICL now.
v2: Pass BTI around instead of having an enum. (Jason)
Emit two SHADER_OPCODE_MEMORY_FENCE instead of one that gets
transformed into two. (Jason)
List tests fixed. (Lionel)
v3: For clarity, split the decision of which fences to emit from the
emission code. (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
v2: 1) Drop changes for vec4 backend as on Gen11+ we don't support
align16 mode (Matt Turner)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This rewrites the ddy in EXECUTE_4 mode with a loop to make it more
obvious what is going on and also sets the group each of the 4 threads
in the groups are supposed to execute.
Fixes the following CTS tests :
dEQP-VK.glsl.derivate.dfdyfine.dynamic_*
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Co-Authored-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Fixes: 2134ea3800 ("intel/compiler/fs: Implement ddy without using align16 for Gen11+")
With 8 and 16-bit types and anything where we have to use non-trivial
strides registersto deal with restrictions, we end up with things that
look like partial writes even though we don't care about any values in
the register except those written by that instruction. This is
particularly important when dealing with loops because liveness sees
is_partial_write and the fact that an old version from a previous loop
iteration may be valid at that point and extends all purely partially
written values to the entire loop.
This commit adds a new UNDEF instruction which does nothing (the
generator doesn't emit anything) but which does a fake write to the
register. This informs liveness that we don't care about any values
before that point so it won't consider those registers to be falsely
live. We can safely emit UNDEF instructions for all SSA values that
come in from NIR and nearly all temporaries generated by various stages
of the compiler. In particular, we need to insert UNDEF instructions
when we handle region restrictions because the newly allocated registers
are almost guaranteed to be partially written.
No shader-db changes.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110432
Reviewed-by: Matt Turner <mattst88@gmail.com>
We set header_present but then pass it some random garbage. Give it g0
instead. I'm not actually sure this does anything but g0 is the usual
header data and this is what the windows driver does so it seems like a
good idea.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
In the FS IR we pretend that the instruction is predicated with (+f0.1)
just for flag dependency tracking purposes. Since the instruction
doesn't support predication before Haswell, we unset the predicate so we
should also unset the flag register so that we can round-trip the
disassembly.
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We now have a lowering pass that will do this at the fs_visitor level,
so we can remove this code from gen11+.
v2: Reduce size of the "i" array from 4 to 2 (Matt).
Reviewed-by: Matt Turner <mattst88@gmail.com>
Move the scalar-region conversion from the IR to the generator, so it
doesn't affect the Gen11 path. We need the non-scalar regioning
for a later lowering pass that we are adding.
v2: Better commit message (Matt)
Reviewed-by: Matt Turner <mattst88@gmail.com>
Broadwell has restrictions that apply to Align16 half-float that
make the Align16 implementation of this invalid for this platform.
Use the gen11 path for this instead, which uses Align1 mode.
The restriction is not present in cherryview, gen9 or gen10, where
the Align16 implementation seems to work just fine.
v2:
- Rework the comment in the code, move the PRM citation from the
commit message to the comment in the code (Matt)
- Cherryview isn't affected, only Broadwell (Matt)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> (v1)
Reviewed-by: Matt Turner <mattst88@gmail.com>
We were assuming 32-bit elements. Also, In SIMD8 we pack 2 vector components
in a single SIMD register, so for example, component Y of a 16-bit vec2
starts is at byte offset 16B. This means that when we compute the offset of
the elements to be differentiated we should not stomp whatever base offset we
have, but instead add to it.
v2
- Use byte_offset() helper (Jason)
- Merge the fix for SIMD8: using byte_offset() fixes that too.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> (v1)
Reviewed-by: Matt Turner <mattst88@gmail.com>
ARB_fragment_shader_interlock depends on memory fences to
ensure fragment ordering and this ordering guarantee is
only supported from GEN9 onwards.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109980
Fixes: 939312702e "i965: Add ARB_fragment_shader_interlock support."
Signed-off-by: Plamena Manolova <plamena.n.manolova@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
For split indirect sends we have to put the EOT parameter in the
extended descriptor as well as the instruction itself so just calling
brw_inst_set_eot is insufficient. Moving the EOT handling handling into
the send_indirect_[split]_message helper lets us handle it properly.
Strides up to 32B can be implemented for the source regions of most
instructions by leveraging either the vertical or the horizontal
stride of the hardware Align1 region. The main motivation for this is
that currently the lower_integer_multiplication() pass will happily
double the stride of one of the 32-bit sources, which can blow up if
the stride of the original source was already the maximum value
allowed by the hardware.
An alternative would be to use the regioning legalization pass in
order to lower such strides into the composition of multiple legal
strides, but that would be somewhat less efficient.
This showed up as a regression from my commit cbea91eb57
in Vulkan 1.1 CTS tests on CHV/BXT platforms, however it was really a
pre-existing problem that had affected conformance on other platforms
without native support for integer multiplication. CHV/BXT were
getting around it because the code I removed in that commit had the
"fortunate" side effect of emitting narrower regions that didn't hit
the hardware stride limit after lowering. Beyond fixing the
regression this fixes ~90 additional Vulkan 1.1 subgroup CTS tests on
ICL (that's why this patch is marked for inclusion in mesa-stable even
though the original regressing patch was not).
According to Jason, a nearly equivalent change had been committed
previously as e8c9e65185 and then (mistakenly?) reverted as
a31d038208.
Cc: mesa-stable@lists.freedesktop.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109328
Reported-by: Mark Janes <mark.a.janes@intel.com>
Tested-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The original idea was that the backend compiler could eliminate
surfaces, so we would have it mark which ones are actually used,
then shrink the binding table accordingly. Unfortunately, it's a
pretty blunt mechanism - it can only prune things from the end,
not the middle - since we decide the layout before we even start
the backend compiler, and only limit the size. It also basically
gives up if it sees indirect array access.
Besides, we do the vast majority of our surface elimination in NIR
anyway, not the backend - and I don't see that trend changing any
time soon. Vulkan abandoned this plan a long time ago, and I don't
use it in Iris, but it's still been kicking around in i965.
I hacked shader-db to print the binding table size in bytes, and
observed no changes with this patch. So, this code appears to do
nothing useful.
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
These are broken on a future platform, but it turns out we don't need
to fix them, since they're just type-converting moves with strided
source. Kill them.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Align16 is no longer a thing, so a new implementation is provided
using Align1 instead. Not all possible swizzles can be represented as
a single Align1 region, but some fast paths are provided for
frequently used swizzles that can be represented efficiently in Align1
mode.
Fixes ~90 subgroup quad swap Vulkan CTS tests.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
To have uniform behavior while disassembling send(c) instruction use
register type of unsigned doubleword for src1 when message descriptor is
immediate value. Bspec does not specifiy anything for src1 immediate
default type.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
v2: Split changes to the message type field to another patch. Suggested
by Caio.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
