The GL frontend is perfectly good at lowering it like we do. Cuts out a
bunch of duplicate code.
We still have ucp_enables for the FS due to lowering of CLIPDIST to
discards in the FS.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8953>
This should help vk-icd-loader skip libraries of the wrong bit width.
Reviewed-by: Eric Engestrom <eric@igalia.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/35567>
There's no need for a per driver HMI implementation since the
vk_icdGetInstanceProcAddr implementation can well populate the required
entrypoints for Android icd.
Changes have to be done in this single commit for simplicity. Otherwise,
I would have to create a separate android shared library in the runtime
like how vk_instance is handled today, so that the target is able to
check per driver enablement def. However, after all drivers have
migrated over within this MR, we still have to clean those up. So I
decided to just do those in a single commit instead.
v2: avoid preloading u_gralloc in vulkan hal open
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> (v1)
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/35561>
Per <hardware/hwvulkan.h>, the hw_device_t::close() function is called
upon driver unloading. The behavior has been like this since Android 10.
Acked-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/35561>
PresentWait2 should be possible on any physical device, as it adds a
surface capability query that depends on common wsi code.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/35414>
Some tests no longer OOM after updating the devices to the 6.12 kernel.
Therefore, remove those tests from the skip list.
Also, reduce the timeout of some full-run jobs, as the VK full-run
usually takes no longer than 25 minutes in the RPi 4 and no longer than
30 minutes in the RPi 5.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/35300>
Before we move a UBO load to a previous location in the block we take a
reference to the instruction after it so we can continue the loop from
there, however, if the load we just moved was already the last instruction
in the block we just want to break the loop right there.
Fixes crashes with shaders from http://flightradar24.com
Fixes: 8998666de7 ("broadcom/compiler: sort constant UBO loads by index and offset")
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/35333>
If the render area is restricted to a section of the framebuffer, there
is no need to consider all the framebuffer size when configuring the
supertiles, as only the supertiles coordinates of the affected area will
be submitted.
This allow to create supertiles smaller than the ones in case
considering the full screen, reducing the tiles that need to be
processed.
This also fixes https://gitlab.freedesktop.org/mesa/mesa/-/issues/13218.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/35257>
So far the driver was configuring the supertiles to be less than 256.
But actually, there can be up to 256, not strictly less than 256.
There is one restriction though: the frame width or height in supertiles
must be less than 256.
It also moves this limit to the limits file, which is shared by v3d and
v3dv.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/35257>
Something is not working correctly when running Vulkan implicit
synchronization tests. They are affecting other tests running in
parallel in the sense that they go from taking a few seconds to time
out.
Let's skip them until we find where is the problem, as this is affecting
the CI with several flakes and timeouts.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/35064>
When computing the number of primitives from the number of vertices, for
the case of line loops we need to include an extra line that closes the
shape.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/35007>
The indirect CSD job is added to the list of jobs when the device do not
support CPU queues. Otherwise it is not added, which means the job is
not free when the command buffer frees all the resources, generating a
leak.
This fixes this leak by identifying the job that contains the indirect
CSD job, and freeing it before freeing the job itself.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34892>
The EXTERNAL_KERNEL_TAG variable is no longer needed.
For LAVA and bare-metal, we can override the KERNEL_TAG variable to fetch
both the kernel image and modules from a different tag than the default
mainline gfx-ci/linux kernel.
For LAVA, this also avoids the issue where jobs using EXTERNAL_KERNEL_TAG
would still have mainline kernel modules downloaded by the LAVA overlay.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34873>
These stages are for the jobs that are skipped in merge pipelines,
automatically run in nightly pipelines, and are available to run
manually in other pipelines.
None of these ever run in post-merge pipelines.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34590>
While all the arm32 jobs are testing GL, there are both GL and VK arm64
jobs. This is required to be able to use the rootfs from the test-*
containers.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34451>
As we have a -vk suffix for the Vulkan-related suites, add a -gl one for
the OpenGL/ES related suites.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Eric Engestrom <eric@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34680>
The aim is to increase the coverage as maximum as possible while using
the less possible DuTs, everything under a testing budget of 10 minutes.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Eric Engestrom <eric@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34680>
