We get a lot of useful coverage from running graphicsfuzz with spilling
enabled, but it's also pretty slow and can cause intermittent hangcheck
failures. I thought I'd categorized them when merging !14839 (device loss
on reset), but it looks like not all of them and we're now more likely to
have flakes take out the whole test run when a single flake makes the rest
of the caselist a flake.
This is a little unfortunate in that it means our test environment is not
the same as a stock system you would want to run deqp on to submit
conformance, but I think it's an improvement in the test maintenance work
vs needing to fix things up later.
We have some other tests besides turnip that can trigger hangchecks which
we might also like this increase for (some disabled traces, for example).
However, freedreno GL has a 5-second timeout waiting for idle when
mapping, and a couple of 2-second timeouts in a row can result in spurious
failures in other tests!
Fixes: #6163
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15435>
We use bi_dontcare() to specify any encoding where we don't care about
the value, with a preference for power-efficient encodings. On Bifrost,
a (possibly nonexistant) FAU read is the best encoding. On Valhall, that
encoding doesn't exist so just use a zero. That should be good enough in
practice.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15461>
When emitting code during or after register allocation, we need to be able to
emit constants without running the constant->{LUT, move, uniform} pass running
after. In particular, we need to access the constant 0 to implement spill code.
Add a Valhall-specific zero for this purpose.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15461>
These are preloaded in different places across Bifrost and Valhall. Abstract
that away so code using the builder isn't littered with "is Valhall?" checks.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15461>
The unknown field is a descriptor type, which we model as an opcode2 since it's
a fixed constant. This allows us to disambiguate LEA_TEX_IMM from LEA_ATTR_IMM.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15461>
The position and varying shader environment descriptors are additional sections
of the job, rather than part of the (fragment only) DCD. This distinction
matters for non-IDVS jobs.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15461>
There's an overflow here if index_size = 4. Caught when bringing up Valhall, not
sure why this was never caught before. Yikes.
Fixes: 7a6a5f3fe1 ("panfrost: Handle explicit primitive restart")
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15461>
Stops gamescope from recompiling pipelines on every start.
Cc: mesa-stable
Signed-off-by: Georg Lehmann <dadschoorse@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15454>
Lifetime of descriptor sets and pipeline layouts are odd. Let's refcount
them so we don't end up with use-after-free patterns.
That means we can't use custom allocators for those objects.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14406>
VK_SYSTEM_ALLOCATION_SCOPE_COMMAND is used for transient allocations that
are not expected to live outside the vkXxx(). Use
VK_SYSTEM_ALLOCATION_SCOPE_OBJECT for cmd_entry allocations.
v2 (Jason Ekstrand):
- Also fix the manually typed entrypoints in vk_cmd_enqueue.c
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14406>
Needed to report allocation failures when vkEndCommandBuffer() is
called.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14406>
Instead of one MANUAL_COMMANDS, we now have two deny-lists:
MANUAL_COMMANDS and NO_ENQUEUE_COMMANDS. The former is for things which
have a manually typed implementation in vk_cmd_enqueue.c and the later
is for things we want to ignore entirely. This lets us auto-generate
vk_cmd_enqueue_unless_primary_Cmd* entrypoints for the manually typed
vk_cmd_enqueue_Cmd* entrypoints.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14406>
These check the command buffer level and enqueue the command if it's not
a primary but uses vk_device::command_dispatch_table for primaries.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14406>
This fixes bugs with lavapipe's hand-rolled pCount handling. The driver
is supposed to set *pCount to the number of queues actually written in
the case where it's initialized to a value that's too large. It's also
supposed to handle *pCount being too small.
Fixes: b38879f8c5 ("vallium: initial import of the vulkan frontend")
Acked-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15459>
The Vulkan spec was recently clerified to say that transitions only
happen to the bound layers:
"Automatic layout transitions apply to the entire image subresource
attached to the framebuffer. If multiview is not enabled and the
attachment is a view of a 1D or 2D image, the automatic layout
transitions apply to the number of layers specified by
VkFramebufferCreateInfo::layers. If multiview is enabled and the
attachment is a view of a 1D or 2D image, the automatic layout
transitions apply to the layers corresponding to views which are
used by some subpass in the render pass, even if that subpass does
not reference the given attachment."
This is in the context of render passes but it applies to dynamic
rendering because the implicit layout transition stuff is a Mesa pseudo-
extension and inherits those rules.
For clears, the Vulkan spec says:
"renderArea is the render area that is affected by the render pass
instance. The effects of attachment load, store and multisample
resolve operations are restricted to the pixels whose x and y
coordinates fall within the render area on all attachments. The
render area extends to all layers of framebuffer."
Again, this is in the context of render passes but the same principals
apply to dynamic rendering where the layerCount and renderArea are
specified as part of the vkCmdBeginRendering() call.
Fixes: 3501a3f9ed ("anv: Convert to 100% dynamic rendering")
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15441>
This was waiting for multisync support in our kernel interface so
we can wait on the actual imported payload of a semaphore rather
than the last job we submitted.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15342>
Any thread we create may end up creating/submitting at least a
noop job, which is a shared object. Before multisync, this was
an issue only for the creation of the job itself, but with
multisync we can also modify parameters of the noop job
every time it is used (for signaling and serialization
configuration).
This change adds a noop mutex that all threads (main, wait and
master) take before submitting a noop job to ensure concurrent
access is not an issue.
Fixes flakyness observed with multisync with the following test:
dEQP-VK.api.command_buffers.secondary_execute_twice
Reviewed-by: Melissa Wen <mwen@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15342>
If a CPU job comes first in a command buffer with a semaphore wait operation
we need to wait on the CPU for the semaphore to be signaled before we process
the job.
We have been doing this with a WaitForIdle operation, but that only works
if the semaphore has been submitted for signaling from the same instance
of the driver. If we have an imported payload from another instance in our
semaphore however, waitForIdle may return too early since the submission
to signal the semaphore may have been submitted by a different instance
of the driver as well, and our wait for idle checks only know about this
instance submissions.
To fix this, we always submit a noop job from our instance that waits on
the semaphores on the GPU and follow up with WaitForIdle to wait for that
to complete.
Fixes test failures and/or assert crashes in:
dEQP-VK.synchronization.cross_instance.*
(when enabling support for semaphore imports)
Reviewed-by: Melissa Wen <mwen@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15342>
When we have a wait thread we can't ensure that the last job in the last
command buffer will be the one to signal semaphores because in this case
there is no gurantee that jobs from command buffers in the batch will be
submitted to the GPU in order, as those put in a wait thread will be
submitted later when the event wait operation is completed.
Instead, we need to wait for all outstanding wait threads to complete
and only then we should signal any semaphores or fences.
This also fixes a bug where the wait for events was the last job in
the command buffer. In this case, once the event wait is completed
we have no additional jobs to submit and thus would never try to
signal semaphores or fences.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15342>
This is preparatory work to expose support for importing semaphores, which
was waiting on kernel multisync support.
When we implemented user-space multisync support we didn't handle
temporary fence/semaphore payload imports at all, so we fix that here.
Also, we add a has_temp boolean flag to identify the case where we have
a temporary payload in a fence/sempahore instead of just checking if
temp_sync is not 0. This is necessary to support semaphore imports
(for which we are not exposing support yet) because these need to drop
the temporary payload when they are used as wait semaphores in a submit,
but we can't destroy the underlying temp_sync at that point because it
needs to survive at least until the submit is finished, so instead
we use a flag to tell if we have an active temporary payload or not,
and we simply destroy any temp_sync on a semaphore destroy or any new
import on the same semaphore. We only strictly need this flag for
semaphores because fences drop the temporary payload when they are
reset, which happens in the CPU and can only be done if the GPU is not
using the fence, but we add the same flag for the fence for consistency.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15342>
