The if statement we insert would insert a new block before the end block
(and remove the old pre-end-block). If the new block ended up later in
the HT due to its pointer's hash value, you'd emit another copy of the if
statement after the last one. I saw this happen up to 4 times in testing.
The worst case would be if all those additions and removals ended up
reallocating the HT, at which point we might use-after-free.
Fixes inconsistent shader-db results with geometry shaders.
Cc: mesa-stable.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17501>
va_pack asserts a large number of invariants about the instruction being packed.
If one of these fails (due to an invalid instruction), it's helpful to inspect
the failing instruction, as it may not be apparent in a large shader. Pass the
instruction through with all the assertions in va_pack for easier debugging.
Now assertion failures when packing are easier to debug:
Invalid invariant lo.type == hi.type:
= STORE.i32.flow2.wls br5, br2, wls_ptr[1], byte_offset:0
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17224>
When we assert out due to certain invalid encoding, it's helpful to know what
instruction is causing the failure, since it may not be obvious from the
assembly for large shaders. Now we get nice errors when failing:
Invalid opcode:
br0 = VAR_TEX.f32.flow8.store.skip.lod_mode.center , texture_index:0, varying_index:0
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17224>
Apparently, the point coord origin within a batch can change with Gallium
(seemingly even with GLES? where that's impossible at an API level?) but that
doesn't matter if we're not drawing points. This might have to do with internal
Gallium CSOs (e.g. u_blitter). Issue noticed in SuperTuxKart, which was getting
state change flushes. Performance on one level on a Valhall GPU improved from
26fps to 29fps.
Fixes: 3641dfe436 ("panfrost: Flip point coords in hardware")
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17430>
b6a30b72ab ("panfrost: Implement provoking vertices on Valhall") added an
assertion that every draw selects a particular provoking vertex. The intent was
to ensure provoking vertex selection actually happened. Unfortunately, the
assertion is too strong, as the provoking vertex is irrelevant for some (most)
draws. For those, we don't *want* to commit to a particular provoking vertex for
those to avoid flushing.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17430>
driFetchDrawable is only ever called from the MakeCurrent path, which
means it has to handle the case of pre-GLX-1.3 Windows being named as
the drawable. When it finds the drawable in the hash, it increments its
refcount before returning it, so for a GLXWindow it would be 2 on first
return, one from glXCreateWindow and one from glXMakeCurrent. But when
it does not find the drawable and creates one for the naked Window, the
reference count on first return would only be 1. As a result, if this
context was then ever bound to a different drawable, the old Window's
DRI drawable state (like the back buffer) would be destroyed.
Fixes piglit's glx-multi-window-single-context and glx-make-current for
a variety of drivers.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/6713
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17479>
There is nothing more TODO here. With softpin, which is available on all
GPUs using texture descriptors, there is no need for the kernel to patch
the descriptor, as the proper GPU virtual address is filled in by userspace.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17448>
There already is a error handling label to free the sampler view
struct and return failure. Consistently use this label to make
error handling more uniform.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17448>
Texture descriptors currently waste a massive ammount of memory, as every
one is allocated via a separate BO. As the allocation granularity of the
kernel is 4KB and the descriptor is only 256B, 93.75% of the allocated
memory is wasted.
Add a simple suballocator for the texture descriptors, to allocate multiple
ones out of a single kernel BO. This isn't perfect, as freed slots in the
suballocated resource are not reused, but worst-case we end up with the
same waste as we had before. This also potentially improves efficiency at
the kernel side, as this reduces the number of BOs needed for the sampler
views in each submit.
As the BO is now used by multiple descriptors, avoid syncing with the GPU
via the cpu_prep/fini calls, as to not introduce stalls between pending
rendering and new descriptors being filled. This is safe, as each
suballocation slot is only used once, so newly filled slots are certainly
not in use by the GPU.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17448>
The dummy texture descriptor and the dummy render target relocs are not ever
changed by a context operation, so we can save some space by moving them to
the screen and potentially share them and the BOs backing them between
multiple contexts.
Also don't hold two pointers to the same BO, one in the reloc and one raw,
but always just use the reloc one.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17448>
libc++ does not yet implement the c++17 monotonic_buffer_resource,
so emulate it by doing normal allocations that are cleaned up
when the resource is destroyed.
v2: - Use C include and version without namespace aligned_alloc
- add include for sstream needed with clang++ (maurossi)
Closes: #6836
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Filip Gawin <filip@gawin.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17452>
With that most piglits for compatibility contexts are
passing, so enable higher compatibility profile support.
v2: fix formatting ahd fallthrough tag (Filip)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Filip Gawin <filip@gawin.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17484>
Another hot-fix: when a local register is written to, it is
actually unlikely that the value is never used, so just make
sure that this is never done.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Filip Gawin <filip@gawin.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17484>
On Cayman bank_swizzle[4] is never counted up, so add an
additional condition to make sure the loop is finished
at one point. This is a hot-fix, the logic below should be
improved.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Filip Gawin <filip@gawin.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17484>
Now that we have separate C types for the different sub-command types,
we can require a pointer to that type to be passed into functions
which expect the current sub-command to be of a specific type.
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Reviewed-by: Rajnesh Kanwal <rajnesh.kanwal@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17458>
This is a simple optimization to make type-specific uses of struct
pvr_sub_cmd slightly less verbose.
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Reviewed-by: Rajnesh Kanwal <rajnesh.kanwal@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17458>
The compiler has improved significantly since we found this issue
and this is no longer required.
Notice that because we are increasing the number of samplers
supported beyond what we can loop unroll (currently capped at 16),
some piglit tests that test the maximum number of samplers supported
start to fail because they use indirect indexing on a sampler array
and we don't support that (previously the indirect indexing was
removed by loop unrolling). This is a bug in tests which the
GLSL linker detects, failing to compile the shaders.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17509>
Also, remove the FIXME to pre-compute this in images. We only use
this helper from copy/clear operations where we may be working
with a compatible framebuffer format instead of the original image.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17509>
Correct the max thread number for DG2+ platforms according
to below bspec.
Ref: Bspec: 47202
Cc: mesa-stable
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17506>
Before, if the ssbo is too large this would always return 0.
Also, this code is easier to optimize, so the common case of offset 0
and pot stride results in one ushr instead of 5+ instructions.
Signed-off-by: Georg Lehmann <dadschoorse@gmail.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17468>
SIGSEGV is used by Vulkan API trace layers to track user changes in
device memory mapped to user space. Now with drivers such as Zink, GLES
applications are translated into Vulkan API calls and therefore it is
possible to be tracked by Vulkan api trace layers.
Blocking SIGSEGV hinders one of the memory tracking mechanisms used by
such layers.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17273>
With dynamic vertex bindings the vertex format lookups are a lot
more frequent (vs being baked in the pipeline). Add a simple lookup
cache using a dynamic array to keep track of the hw values, and
avoid repeated translation.
This also reduces the memset to just the bitfields since all
the others will be overwritten.
Seen in perf traces gputest gimark with zink on radv.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15846>
Ensure that if we have swizzle on the initial format, that the
component bits are identical with the lowered format.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17385>
For some formats like VK_FORMAT_B5G6R5_UNORM_PACK16, we have no direct
matching HW format. We can support it by swizzling.
We already apply those swizzles for image views. We just forgot to
deal with buffer views.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/6235
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17385>
