I didn't notice this due to a noobed piglit run. It wasn't previously
noticed because the patch was only run on a driver that supported GLES3.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Fixes error EGL_BAD_ATTRIBUTE in the tests below on Intel Sandybridge:
* piglit egl-create-context-verify-gl-flavor, testcase OpenGL ES 3.0
* gles3conform, revision 19700, when runnning GL3Tests with -fbo
This plumbing is added in order to comply with the EGL_KHR_create_context
spec. According to the EGL_KHR_create_context spec, it is illegal to call
eglCreateContext(EGL_CONTEXT_MAJOR_VERSION_KHR=3) with a config whose
EGL_RENDERABLE_TYPE does not contain the EGL_OPENGL_ES3_BIT_KHR. The
pertinent
portion of the spec is quoted below; the key word is "respectively".
* If <config> is not a valid EGLConfig, or does not support the
requested client API, then an EGL_BAD_CONFIG error is generated
(this includes requesting creation of an OpenGL ES 1.x, 2.0, or
3.0 context when the EGL_RENDERABLE_TYPE attribute of <config>
does not contain EGL_OPENGL_ES_BIT, EGL_OPENGL_ES2_BIT, or
EGL_OPENGL_ES3_BIT_KHR respectively).
To create this patch, I searched for all the ES2 bit plumbing by calling
`git grep "ES2_BIT\|DRI_API_GLES2" src/egl`, and then at each location
added a case for ES3.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
We used to keep the color buffers in the dri_buffers array and
swap __DRI_BUFFER_BACK_LEFT and __DRI_BUFFER_FRONT_LEFT around there
and swap third_buffer in in case we needed to triple buffer. That
gets a little fidgety with all the swaps, so lets use the
color_buffers pool like the gbm platform does. We track the color buffers,
their corresponding wl_buffer and locked status here and just plug
a free one into dri2_surf->buffers when we need to.
This is a nice clean-up in itself, but it also sets us up to track
buffer age in the color_buffers structs.
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Since wl_display_dispatch_queue() returns the number of processed events
or -1 on error, only cancel the roundtrip if an -1 is returned.
This also fixes a potential memory corruption bug happening when the
roundtrip does an early return and the callback later writes to the then
out of scope stack allocated `done' parameter.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
In Jelly Bean, the interface to ANativeWindow changed. The change included
adding a new parameter the queueBuffer and dequeueBuffer methods,
removing the lockBuffer method, and requiring libsync.
v2:
- s/fence_fd == -1/fence_fd != -1/
- Fix leak. Close the fence_fd.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
When a client frame callback is executed and the client starts rendering
again, the egl event queue might not have been dispatched so that the
buffer release event for the previous frame hasn't been processed. In
that case a third buffer is allocated, even though it would be possible
to reuse the buffer that was just released.
The wl_display_dispatch_queue_pending() entry point is available from
wayland-client 1.0.2, so require that in configure.ac. Also, just
let the pkg-config macro throw its own error, which will show what version
we were looking for and failed to find.
Note: This is a candidate for stable branches.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Commit ca3ed3e024 fixed the problem where
eglMakeCurrent would trigger a getbuffer callback that then breaks the
following wl_egl_window_resize() call. However, we still need to
invalidate buffers in eglSwapBuffers, since in wayland we always swap
buffers, so the dri driver needs to come out and ask us for the next buffer
after each swapbuffer.
Note: this is a candidate for stable branches.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
We used to invalidate the drawable after a call to eglSwapBuffers(),
so that a wl_egl_window_resize() would take effect for the next frame.
However, that leads to calling dri2_get_buffers() when eglMakeCurrent()
is called with the current context and surface, and a later call to
wl_egl_window_resize() would not take effect until the next buffer
swap.
Instead, add a callback from wl_egl_window_resize() back to the wayland
egl platform, and invalidate the drawable only when it is resized.
This solves a bug on wayland clients when going back to windowed mode
from fullscreen when clicking a pop up menu, where the window size
after this would be the fullscreen size.
Note: this is a candidate for stable branches.
CC: wayland-devel@lists.freedesktop.org
When dri2CreateContextContextAttribs failed, eglCreateContext returned
NULL yet set the error code to EGL_SUCCESS! The problem was that
eglCreateContext ignored the error code returned by
driCreateContextAttribs.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56706
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Not maintained since 2008. Doubtful that it's worked in quite a while.
Also see commit 32ac8cb05 which removed VMS stuff from Makefile in 2009.
Cc: Jouk Jansen <j.jansen@tudelft.nl>
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
If a frame callback is not destroyed when destroying a surface, its
handler function will be invoked if the surface was destroyed after the
callback was requested but before it was invoked, causing a write on
free:ed memory.
This can happen if eglDestroySurface() is called shortly after
eglSwapBuffers().
Note: This is a candidate for stable branches.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
It doesn't provide the cross-process buffer sharing that a window system
pixmap could otherwise support and we don't have anything left that uses
this type of surface.
The 0.99.0 Wayland release changes the event API to provide a thread-safe
mechanism for receiving events specific to a subsystem (such as EGL) and
we need to use it in the EGL platform.
The Wayland protocol now also requires a commit request to make changes
take effect, issue that from eglSwapBuffers.
Version 12 of the EGL_KHR_create_context spec changed this behavior.
NOTE: This is a candidate for the 9.0 branch
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
The invalidate event support is a careful dance between driver and loader,
where both have to say they can handle it, and then the loader reports
invalidate events for the driver so the driver can do the optimization.
The EGL code doesn't report __DRIuseInvalidateExtension to the driver, so it
has no responsibility to call the driver's invalidate function, and the driver
is doing the glViewport hack because it assume. This is not
the only time invalidate would need to be called (we need it *any* time an
invalidate event comes down the pipe, but we don't watch for them), so just
stop calling the driver's function.
Acked-by: Chad Versace <chad.versace@linux.intel.com>
This behavior mostly matches glx_dri2. It's slightly complicated in
comparison because EGL exposes the implementation limits in the EGL config.
Note that platform_x11 was the only one setting swap_available, so the move of
the MaxSwapInterval into it is appropriate.
Acked-by: Chad Versace <chad.versace@linux.intel.com>
dri_interface.h comes from our tree, so why litter our tree with ifdefs for
older versions of it?
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
The EGLNative* types are all defined to be pointers across all our EGL
implementations, but in the X11 platform they're actually just XIDs (32-bit
integers).
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
The EGL_NOK_swap_region2 spec states that the rectangles are specified
with a bottom-left origin within a surface coordinate space also with a
bottom left origin, so this patch ensures the rectangles are flipped
before passing them on to dri2_copy_region.
Fixes piglit's egl-nok-swap-region test.
Tested-by: Matt Turner <mattst88@gmail.com>
This patch has been generated by the following Coccinelle semantic
patch:
@@
expression E;
identifier I;
@@
- I = malloc(E);
+ I = calloc(1, E);
...
- memset(I, 0, sizeof *I);
Reviewed-by: Brian Paul <brianp@vmware.com>
This patch has been generated by the following Coccinelle semantic
patch:
// Remove useless checks for NULL before freeing
//
// free (NULL) is a no-op, so there is no need to avoid it
@@
expression E;
@@
+ free (E);
+ E = NULL;
- if (unlikely (E != NULL)) {
- free(E);
(
- E = NULL;
|
- E = 0;
)
...
- }
@@
expression E;
type T;
@@
+ free ((T) E);
+ E = NULL;
- if (unlikely (E != NULL)) {
- free((T) E);
(
- E = NULL;
|
- E = 0;
)
...
- }
@@
expression E;
@@
+ free (E);
- if (unlikely (E != NULL)) {
- free (E);
- }
@@
expression E;
type T;
@@
+ free ((T) E);
- if (unlikely (E != NULL)) {
- free ((T) E);
- }
Reviewed-by: Brian Paul <brianp@vmware.com>
This patch has been generated by the following Coccinelle semantic
patch:
// Don't cast the return value of malloc/realloc.
//
// Casting the return value of malloc/realloc only stands to hide
// errors.
@@
type T;
expression E1, E2;
@@
- (T)
(
_mesa_align_calloc(E1, E2)
|
_mesa_align_malloc(E1, E2)
|
calloc(E1, E2)
|
malloc(E1)
|
realloc(E1, E2)
)
These calls allowed Xlib to use a custom memory allocator, but Xlib has
used the standard C library functions since at least its initial import
into git in 2003. It seems unlikely that it will grow a custom memory
allocator. The functions now just add extra overhead. Replacing them
will make future Coccinelle patches simpler.
This patch has been generated by the following Coccinelle semantic
patch:
// Remove Xcalloc/Xmalloc/Xfree calls
@@ expression E1, E2; @@
- Xcalloc (E1, E2)
+ calloc (E1, E2)
@@ expression E; @@
- Xmalloc (E)
+ malloc (E)
@@ expression E; @@
- Xfree (E)
+ free (E)
@@ expression E; @@
- XFree (E)
+ free (E)
Reviewed-by: Brian Paul <brianp@vmware.com>
As discussed with Kristian on #wayland. Pushes the decision of components into
the dri driver giving it greater freedom to allow t to implement YUV samplers
in hardware, and which mode to use.
This interface will also allow drivers like SVGA to implement YUV surfaces
without the need to sub-allocate and instead send 3 seperate buffers for each
channel, currently not implemented.
I have tested these changes on Gallium Svga. Scott tested them on both intel
and Gallium Radeon. Kristan and Pekka tested them on intel.
v2: Fix typo in dri2_from_planar.
v3: Merge in intel changes.
Tested-by: Scott Moreau <oreaus@gmail.com>
Tested-by: Pekka Paalanen <ppaalanen@gmail.com>
Tested-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
On Android we want to add only double buffered configs for visuals.
Earlier implementation set the SurfaceType as 0 for single buffered
configs but driver still exposed these configs that were not compatible
with any egl surface type. This caused Khronos conformance test runs to
fail on Android. This patch fixes the issue by skipping single buffered
configs earlier and not exposing them.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
android logging macros changed their name in JellyBean.
Signed-off-by: Bruce E. Robertson <bruce.e.robertson@intel.com>
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
We want to check whether there are bits set outside of the valid flags.
Fixes piglit test egl-create-context-invalid-flag-gl
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Uses libkms instead of dri image cursor. Since this is the only user of the
DRI cursor and write interface we can remove cursor surfaces entirely from
the DRI interface and as a consequence also from the Gallium interface as
well. Tho to make everybody happy with this it would probably should add a
kms_bo_write function, but that is probably wise in anyways.
The only downside is that it adds a dependancy on libkms, this could how ever
be replaced with the dumb_bo drm ioctl interface.
Tested-by: Scott Moreau <oreaus@gmail.com>
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
The segmentation fault occurs when DRI2 is not loaded up and
dri2_setup_screen() function deferences dri2_dpy->dri2 (since it's NULL
at this point).
This patch fixes the segmentation fault by checking if dri2 pointer is
not NULL before deferencing it.
Signed-off-by: Paulo Alcantara <pcacjr@profusion.mobi>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Brian Paul <brianp@vmware.com>
In the DRI2 back-end this will get the same API as GLES 2.0.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Just like in GLX, EGL_KHR_create_context requires DRI2 version >= 3, and
EGL_EXT_create_context_robustness requires both DRI2 version >= 3 and the
__DRI2_ROBUSTNESS extension.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The extra block in dri2_create_context is to prevent extra white space noise
in the next patch.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
KHR extension name is reserved for Khronos ratified extensions, and there is
no such thing as EGL_KHR_surfaceless_{gles1,gles2,opengl}. Replace these
three extensions with EGL_KHR_surfaceless_context since that extension
actually exists.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
