The lower_named_interface_blocks() pass is called before we try
assign locations to varyings so this shouldn't be reachable.
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
I believe that `1u << x`, where x >= 32 yields undefined results
according to the C standard.
Particularly MSVC says `warning C4334: '<<' : result of 32-bit shift
implicitly converted to 64 bits (was 64-bit shift intended?)`.
Reviewed-by: Brian Paul <brianp@vmware.com>
Previously we were only reserving a single location for arrays and
structs.
We also didn't take into account implicit locations clashing with
explicit locations when assigning locations for their arrays or
structs.
This patch fixes both issues.
V5: fix regression for patch inputs/outputs in tessellation shaders
V4: just use count_attribute_slots() to get the number of slots,
also calculate the correct number of slots to reserve for gs and
tess stages by making use of the new get_varying_type() helper.
V3: handle arrays of structs
V2: also fix for arrays of arrays and structs.
Acked-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
This will be used in the following patch for calculating array sizes correctly
when reserving explicit varying locations.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Previously we would pack varyings before trying to remove them, this
relied on the packing pass not packing varyings with a location of -1
to avoid packing varyings that should be removed.
However this meant unused varyings with an explicit location would be
packed before they could be removed when we enable packing of them in a
later patch.
V2: fix regression in V1 removing unused varyings in multi-stage SSO,
fix regression with single stage programs.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
There is a function dedicated to demoting unused varyings lets
trust it to do its job.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
After lowering the matching flag is_unmatched_generic_inout is lost so
we need to move this validation before lowering.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
varying_matches::record tries to compute the number of components in
each varying, which varying_matches::assign_locations uses to assign
locations. With varying packing, it uses glsl_type::component_slots()
to come up with a reasonable value.
Without varying packing, it fell back to an open-coded computation
that didn't bother to handle structs at all. I believe we can simply
use 4 * glsl_type::count_attribute_slots(false), which already handles
these cases correctly.
Partially fixes rendering in GFXBench 4.0's tessellation benchmark.
(NVE0 is almost right after this, but i965 is still mostly garbage.)
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
This fixes the calculations for transform feedback for doubles.
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
So vertex shader input attributes are handled different than internal
varyings between shader stages, dvec3 and dvec4 only count as
one slot for vertex attributes, but for internal varyings, they
count as 2.
This patch comments all the uses of this API to clarify what we
pass in, except one which needs further investigation
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
This fixes an issue where the addition of the FLAT qualifier in
varying_matches::record() can break the expected varying order.
It also avoids a future issue with the relaxing of interpolation
qualifier matching constraints in GLSL 4.50.
V2: (by Timothy Arceri)
* reworked comment slightly
Signed-off-by: Gregory Hainaut <gregory.hainaut@gmail.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
This change allows used defined inputs/outputs with explicit locations
to be removed if they are detected to not be used between shaders
at link time.
To enable this we change the is_unmatched_generic_inout field to be
flagged when we have a user defined varying. Previously
explicit_location was assumed to be set only in builtins however SSO
allows the user to set an explicit location.
We then add a function to match explicit locations between shaders.
V2: call match_explicit_outputs_to_inputs() after
is_unmatched_generic_inout has been initialised.
Cc: Gregory Hainaut <gregory.hainaut@gmail.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Current behavior on the interface matching:
layout (location = 0) out0; // Assigned to VARYING_SLOT_VAR0 by user
out1; // Assigned to VARYING_SLOT_VAR0 by the linker
New behavior on the interface matching:
layout (location = 0) out0; // Assigned to VARYING_SLOT_VAR0 by user
out1; // Assigned to VARYING_SLOT_VAR1 by the linker
v4:
* Fix variable name in assert
Signed-off-by: Gregory Hainaut <gregory.hainaut@gmail.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
The idea is to allow 32 normal varyings and 32 patch varyings,
a total of 64. Previously, only a total of 32 was allowed.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Similar to gl_ClipDistance -> gl_ClipDistanceMESA
v2: - renamed is_mesa_var to lowered_builtin_array_variable
- moved LowerTessLevel into gl_constants
- cosmetic changes in lower_tess_level.cpp
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Marek: require a tess eval shader if a tess control shader is present
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
We now have is_array() and without_array() that make the
code much clearer and remove the need for this.
For all remaining calls to this we already knew that
the type was an array so returning a null wasn't adding any value.
v2: use without_array() in _mesa_ast_array_index_to_hir() and don't use
without_array() in lower_clip_distance_visitor() as we want to make sure the
array is 2D.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Commit 18004c3 introduced more restrictive validation to linker
between inputs and outputs. This patch skips the additional check
for programs that utilize GL_ARB_separate_shader_objects, there
inputs and outputs might not make exact match during linking but
only when constructing the final pipeline.
This made some of the GL_ARB_program_interface_query tests shaders
fail to link, these tests can be used to verify the change.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
GLSL ES 3.00 spec, 4.3.10 (Linking of Vertex Outputs and Fragment Inputs),
page 45 says the following:
"The type of vertex outputs and fragment input with the same name must match,
otherwise the link command will fail. The precision does not need to match.
Only those fragment inputs statically used (i.e. read) in the fragment shader
must be declared as outputs in the vertex shader; declaring superfluous vertex
shader outputs is permissible."
[...]
"The term static use means that after preprocessing the shader includes at
least one statement that accesses the input or output, even if that statement
is never actually executed."
And it includes a table with all the possibilities.
Similar table or content is present in other GLSL specs: GLSL 4.40, GLSL 1.50,
etc but for more stages (vertex and geometry shaders, etc).
This patch detects that case and returns a link error. It fixes the following
dEQP test:
dEQP-GLES3.functional.shaders.linkage.varying.rules.illegal_usage_1
However, it adds a new regression in piglit because the test hasn't a
vertex shader and it checks the link status.
bin/glslparsertest \
tests/spec/glsl-1.50/compiler/gs-also-uses-smooth-flat-noperspective.geom pass \
1.50 --check-link
This piglit test is wrong according to the spec wording above, so if this patch
is merged it should be updated.
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
GLSL ES 3.00 spec, chapter 4.6.1 "The Invariant Qualifier",
Only variables output from a shader can be candidates for invariance. This
includes user-defined output variables and the built-in output variables.
As only outputs can be declared as invariant, an invariant output from one
shader stage will still match an input of a subsequent stage without the
input being declared as invariant.
This patch fixes the following dEQP tests:
dEQP-GLES3.functional.shaders.qualification_order.variables.valid.invariant_interp_storage_precision
dEQP-GLES3.functional.shaders.qualification_order.variables.valid.invariant_interp_storage
dEQP-GLES3.functional.shaders.qualification_order.variables.valid.invariant_storage_precision
dEQP-GLES3.functional.shaders.qualification_order.variables.valid.invariant_storage
dEQP-GLES3.functional.shaders.qualification_order.variables.invalid.invariant_interp_storage_precision_invariant_input
dEQP-GLES3.functional.shaders.qualification_order.variables.invalid.invariant_interp_storage_invariant_input
dEQP-GLES3.functional.shaders.qualification_order.variables.invalid.invariant_storage_precision_invariant_input
dEQP-GLES3.functional.shaders.qualification_order.variables.invalid.invariant_storage_invariant_input
No piglit regressions observed.
v2:
- Add spec content in the code
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
producer_var could be NULL if consumer_var is not NULL and
consumer_is_fs is false. This will occur when the producer is NULL and
the consumer is the geometry shader for a program that contains only a
geometry shader. This will occur starting with the next patch.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: pavol@klacansky.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82585
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Patch fixes following test case from 'shaders-with-varyings' WebGL
conformance suite: "vertex shader with unused varying and fragment
shader with used varying must succeed"
v2: emit still a warning if the condition happens (Ian)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This should be ensured by the parser, so assert on that.
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Outputs that are linked to inputs in the next stage must be output to stream 0,
otherwise we should fail to link.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Both the ast->IR and linker have functions with this name, but different
behavior.
Rename the linker's version to var_counts_against_varying_limit to be
closer to what it is actually used for.
Suggested by Ian a while back.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
In an earlier incarnation of populate_consumer_input_sets and
get_matching_input, the consumer_inputs_with_locations array was indexed
using the user-specified location. In that version, only user-defined
varyings were included in the array.
In the current incarnation, the Mesa location is used to index the
array, and built-in varyings are included.
This change fixes the unit test to exepect gl_ClipDistance in the array,
and it resizes the arrays to actually be big enough. It's just dumb
luck that the existing piglit tests use small enough locations to not
stomp the stack. :(
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78258
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Cc: Vinson Lee <vlee@freedesktop.org>
This will be used for GL_ARB_separate_shader_objects. That extension
not only allows separable shaders to rendezvous by location, but it also
allows traditionally linked shaders to rendezvous by location. The spec
says:
36. How does the behavior of input/output interface matching differ
between separable programs and non-separable programs?
RESOLVED: The rules for matching individual variables or block
members between stages are identical for separable and
non-separable programs, with one exception -- matching variables
of different type with the same location, as discussed in issue
34, applies only to separable programs.
However, the ability to enforce matching requirements differs
between program types. In non-separable programs, both sides of
an interface are contained in the same linked program. In this
case, if the linker detects a mismatch, it will generate a link
error.
v2: Make sure consumer_inputs_with_locations is initialized when
consumer is NULL. Noticed by Chia-I.
v3: Rebase on removal of ir_variable::user_location.
v4: Replace a (stale) FINISHME with some good explanation comments from
Eric.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
When linking a separable program that contains only a fragment shader,
the producer will be NULL. Similar cases will exist with geometry
shaders and, eventually, tessellation shaders.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
