All the checks being replaced are fore potential aliasing so we want to
flush stores whenever the mode might be something that aliases.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6332>
We use the same nir_deref_mode_is_in_set helper that we use in
nir_lower_vars_to_explicit_types for the same reason. If there are any
generic pointers in play, we have to lower all generic pointer modes at
the same time or else we risk types getting out-of-sync.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6332>
We can only lower a deref to SSA in this pass if it's guaranteed to be
nir_var_function_temp. We already flag any variables with complex uses
(i.e. casts) as not being lowerable and refuse to lower any derefs to
them so we don't have to worry about false negatives.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6332>
If we don't know the actual mode then we can't get to the variable so
it's going to be a scratch or other indirect load anyway and we aren't
saving ourselves anything by unrolling the loop.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6332>
In both cases, we're trying to determine if a load is scalarizable. We
don't want to scalarize if it's a function_temp or shader_temp because
it might turn into something we can't scalarize.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6332>
For non-explicit nir_lower_io, we use nir_deref_mode_is because there's
no way it works for generic pointers. For nir_lower_vars_to_explicit_types,
and nir_lower_explicit_io, we use nir_deref_mode_is_in_set to ensure we
never get type confusion. For generic pointers, this means that they
must be called with the full set of generic pointer modes.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6332>
NIR derefs currently have exactly one variable mode. This is about to
change so we can handle OpenCL generic pointers. In order to transition
safely, we need to audit every deref->mode check. This commit adds a
set of helpers that provide more nuanced mode checks and converts most
of NIR to use them.
For simple cases, we add nir_deref_mode_is and nir_deref_mode_is_one_of
helpers. These can be used in passes which don't have to bother with
generic pointers and just want to know what mode a thing is. If the
pass ever encounters generic pointers in a way that this check would be
unsafe, it will assert-fail to alert developers that they need to think
harder about things and fix the pass.
For more complex passes which require a more nuanced understanding of
modes, we add nir_deref_mode_may_be and nir_deref_mode_must_be helpers
which accurately describe the compiler's best knowledge about the given
deref. Unfortunately, we may not be able to exactly identify the mode
in a generic pointers scenario so we have to be very careful when we use
these. Conversion of these passes is left to later commits.
For the case of mass lowering of a particular mode (nir_lower_explicit_io
is one good example), we add nir_deref_mode_is_in_set. This is also
pretty assert-happy like nir_deref_mode_is but is for a set containment
comparison on deref modes where you expect the deref to either be all-in
or all-out.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6332>
We already have the variable so we know the mode exactly. Just use that
instead of the deref mode. If these paths ever have to handle variable
pointers (not likely since they're OpenGL-specific), we can fix them to
handle crazy deref modes then.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6332>
In split_var_list_structs where we initalize the splitting, we already
use get_complex_used_vars to avoid splitting any variables that have a
complex use. However, we weren't actually handling the complex uses
properly in the case where we can't actually find the variable.
Fixes: f1cb3348f1 "nir/split_vars: Properly bail in the presence of ..."
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6332>
I can't think of any reason why shared and output aren't in this list.
The real thing we're trying to do is avoid premature scalarization
because of a shader or function temporary variable because we might
lower it to something we don't want scalarized later. Also fix the
version we copy+pasted into GCM.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6332>
The img stride was being calculated incorrectly.
Fixes crashes in:
dEQP-VK.api.copy_and_blit.core.image_to_image.all_formats.color.3d.bc1_rgb_srgb_block.bc1_rgb_srgb_block.general_general
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7416>
the tgsi file max is used to determine the number of input slots,
the old code was pretty bogus for the lavapipe cases (it worked
by accident).
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7416>
This code works but isn't entirely correct, for a dvec3 it would
fetch loc 0,1 2,3 4,5 but really each loc only has 4 entries,
instead catch this and read loc 0,1 2,3 loc+1 0,1
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7416>
for render pass information pointers into the command buffer are stored,
but command buffers are immutable content so make sure to use const ptrs
to avoid problems like was seen with clears.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7416>
When the cmd buffer is recorded, we record the attachments state
into it, however we use the pending clear aspects to keep track
of clears, but it should be kept in the state no overwrritten
in the cmd buffer.
Allocate some memory to store this hanging off the state.
This fixes gears and radialblur demos.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7416>
evergreen_emit_atomic_buffer_setup_count is only called if chip >= EVERGREEN
otherwise atomic_used_mask is left uninitialized when unconditionally used by
r600_need_cs_space so it might want more space than needed
fix this by always initializing atomic_used_mask
Fixes: 32529e6084 ("r600/eg: rework atomic counter emission with flushes")
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7417>
spirv can't handle this, so instead we have to convert this into constant values
for any driver passing this sort of instruction through to vtn
eventually this will get removed in favor of using direct bo derefs
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7199>
We just freed the NIR after turning it into TGSI, no using it in that last
switch statement.
Closes: #3725
Fixes: 57effa342b ("st/mesa: Drop the TGSI paths for PBOs and use nir-to-tgsi if needed.")
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7407>
Detects the MoltenVK layer and extension.
If present, get the ext function pointers and use to enable full swizzeling suport.
Fixes issues with Swizzling behaviour fro MoltenVk is disabled by default and needed to be enable via this API.
This also supplied the ground work to allow IOSurfaces to be used later for surface passing.
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7383>
This will create code that is easier to combine into MADs/FMA when the
last component of the vector is 1.0.
nir_opt_algebraic_late has an optimization to do something similar but it
only works for inexact code, if the multiplication-by-1 optimization is
done before it and if the backend enables fuse_ffma.
fossil-db (Navi):
Totals from 4296 (3.75% of 114665) affected shaders:
SGPRs: 283468 -> 283764 (+0.10%); split: -0.02%, +0.12%
VGPRs: 172868 -> 172904 (+0.02%); split: -0.09%, +0.11%
CodeSize: 14045312 -> 14027128 (-0.13%); split: -0.15%, +0.02%
MaxWaves: 59285 -> 59282 (-0.01%); split: +0.04%, -0.05%
Instrs: 2703507 -> 2683187 (-0.75%); split: -0.76%, +0.00%
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5631>
This will create code that is easier to combine into MADs/FMA when the
last component is 1.0.
nir_opt_algebraic_late has an optimization to do something similar but it
only works for inexact code, if the multiplication-by-1 optimization is
done before it and if the backend enables fuse_ffma.
fossil-db (Navi):
Totals from 85583 (74.64% of 114665) affected shaders:
SGPRs: 4556060 -> 4558596 (+0.06%); split: -0.07%, +0.12%
VGPRs: 3315060 -> 3312984 (-0.06%); split: -0.23%, +0.17%
SpillSGPRs: 13552 -> 13553 (+0.01%)
CodeSize: 184962756 -> 184431388 (-0.29%); split: -0.32%, +0.03%
MaxWaves: 1208693 -> 1209361 (+0.06%); split: +0.17%, -0.11%
Instrs: 35678819 -> 35361617 (-0.89%); split: -0.91%, +0.02%
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5631>
Drop the PAN_MESA_DEBUG=bifrost flag. Load on Bifrost chips by default.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7408>
It doesn't look like the lowering in !6473 will land before the branch
point. Let's nop out point sprites in the backend to avoid MMU faults
from creating invalid Midgard-style varyings.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7408>
We need to inject a *CUBEFACE1 at pack-time so everything works out.
This is a pretty ugly hack but it'll hold us over until we have a real
scheduler, at which point it won't be necessary at all.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7408>
We need to do the transform specified in the OpenGL spec ourselves, with
some assistance from the hardware.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7408>
