It's what all the call-sites once, so gets rid of a bunch of inlined
glsl_get_base_type() at the call-sites.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Class "ir_constant" had a bunch of constructors where the pointer member
"array_elements" had not been initialized. This could have lead to unsafe
code if something had tried to write anything to it. This patch fixes
this issue by initializing the pointer to NULL in all the constructors.
This issue was discovered by Coverity.
CID: 401603, 401604, 401605, 401610
Signed-off-by: Jakob Sinclair <sinclair.jakob@openmailbox.org>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
The i965 driver has its own pass for fusing mul+add combinations that's
much smarter than what nir_opt_algebraic can do so we don't want to get the
nir_opt_algebraic one just because we didn't set lower_ffma.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We'll need this for a nir pass to lower builtin-uniform access.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Prep work to reduce the noise in the next patch.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Going to convert this pass to parameterized lower_io_to_temporaries, and
we want the user to be able to specify whether to lower outputs or
inputs or both. The restriction of running this pass before validate
to avoid output reads no longer applies.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
A pass to lower complex (struct/array/mat) inputs/outputs to primitive
types. This allows, for example, linking that removes unused components
of a larger type which is not indirectly accessed.
In the near term, it is needed for gallium (mesa/st) support for NIR,
since only used components of a type are assigned VBO slots, and we
otherwise have no way to represent that to the driver backend. But it
should be useful for doing shader linking in NIR.
v2: use glsl_count_attribute_slots() rather than passing a type_size
fxn pointer
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Handled by tgsi_emulate for glsl->tgsi case.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Currently, when cross validating global variables, all global variables
seen in the shaders that are part of a program are saved in a table.
When checking a variable this already exist in the table, we check both
are initialized to the same value. If the already saved variable does
not have an initializer, we copy it from the new variable.
Unfortunately this is wrong, as we are modifying something it is
constant. Also, if this modified variable is used in
another program, it will keep the initializer, when it should have none.
Instead of copying the initializer, this commit replaces the old
variable with the new one. So if we see again the same variable with an
initializer, we can compare if both are the same or not.
v2: convert tabs in whitespaces (Kenenth Graunke)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This reverts commit 99474dc29b.
-Wpedantic is too verbose, even when applied to just a few includes.
We'll just have to deal with the issues as they come.
Reviewed-by: Brian Paul <brianp@vmware.com>
We want to use interface_type, not vtn_var->type. They're normally
equivalent, but for geometry/tessellation per-vertex interface arrays,
we need to unwrap a level.
Otherwise, we tried to iterate a structure members but instead used
an array length. If the array length was longer than the number of
fields in the structure, we'd crash.
Fixes the CreatePipelineGeometryInputBlockPositive layer validation
test.
v2: Just use glsl_without_array() on the vtn_var type
(requested by Jason Ekstrand).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisforbes@google.com>
There are a couple of cycle count changes in shader-db, but it's
basically a wash.
However, with the Broadwell scalar TCS backend enabled, many
Shadow of Mordor shaders benefit from this patch. Because we don't
batch up output writes for TCS, vec4 outputs might not have all
components defined. Many output writes have a value of undef,
which is useless.
With scalar TCS, stats for tessellation shaders on Broadwell:
total instructions in shared programs: 1283000 -> 1280444 (-0.20%)
instructions in affected programs: 34302 -> 31746 (-7.45%)
helped: 71
HURT: 0
total cycles in shared programs: 10798768 -> 10780682 (-0.17%)
cycles in affected programs: 158004 -> 139918 (-11.45%)
helped: 71
HURT: 0
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
shader-db statistics on Broadwell:
total instructions in shared programs: 8963409 -> 8962455 (-0.01%)
instructions in affected programs: 60858 -> 59904 (-1.57%)
helped: 318
HURT: 0
total cycles in shared programs: 71408022 -> 71406276 (-0.00%)
cycles in affected programs: 398416 -> 396670 (-0.44%)
helped: 199
HURT: 51
GAINED: 1
The only shaders affected were in Dota 2 Reborn.
It also sets up for the next optimization.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This better reflects what it does. I plan to add other ALU
optimizations as well, so the old name would be confusing.
In preparation for that, also move the file comments about csels
above the opt_undef_csel function, and delete the ones about there
not being other optimizations.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The assert was null checking dest_arr_parent twice. The intention
seems to be to check both dest_ and src_.
Added in d3636da9
Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>
Split 32-bit and 64-bit fmod lowering as the drivers might need to
lower them separately inside NIR depending on the HW support.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
There are rounding errors with the division in i965 that affect
the mod(x,y) result when x = N * y. Instead of returning '0' it
was returning 'y'.
This lowering pass fixes those cases.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This fixes two of the cases in
GL43-CTS.shader_subroutine.subroutines_not_allowed_as_variables_constructors_and_argument_or_return_types
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
resource just appears in GLSL 4.20 without any fanfare.
Fixes GL43-CTX.CommonBugs.CommonBug_ReservedNames
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From Section 7.3.1.1 (Naming Active Resources) of the OpenGL 4.5 spec:
"For the property LOCATION_COMPONENT, a single integer indicating the first
component of the location assigned to an active input or output variable is
written to params. For input and output variables with a component specified
by a layout qualifier, the specified component is written. For all other
input and output variables, the value zero is written."
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
I don't think this will do much as it's a compiler error
to use component without location which is already in the
table but its good to be consistent.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
This is needed so we don't optimise away the varying when more than
one shares the same location.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This change checks for component overlap, including handling overlap of
locations and components by doubles. Previously there was no validation
for assigning explicit locations to a location used by the second half
of a double.
V3: simplify handling of doubles and fix double component aliasing
detection
V2: fix component matching for matricies
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We make use of the existing IR field location_frac used for tracking
component locations.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
