The callers already have this value, and we would like to make it
follow different rules other than stage that might not be visible to
the helper function, so just pass explicitly.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9779>
Ensure that all resources are properly released by
properly parenting them to a memory context and releasing
the context during test teardown.
Signed-off-by: Rohan Garg <rohan.garg@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8162>
From the Kaby Lake PRM Vol. 7 "Assigning Conditional Flags":
* Note that the [post condition signal] bits generated at
the output of a compute are before the .sat.
Paragraph about post_zero does not mention saturation, but
testing it on actual GPUs shows that conditional modifiers
are applied after saturation.
* post_zero bit: This bit reflects whether the final
result is zero after all the clamping, normalizing,
or format conversion logic.
For signed types we don't care about saturation: it won't
change the result of conditional modifier.
For floating and unsigned types there two special cases,
when we can remove inst even if scan_inst is saturated: G
and LE. Since conditional modifiers are just comparations
against zero, saturating positive values to the upper
limit never changes the result of comparation.
For negative values:
(sat(x) > 0) == (x > 0) --- false
(sat(x) <= 0) == (x <= 0) --- true
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2610
Signed-off-by: Yevhenii Kolesnikov <yevhenii.kolesnikov@globallogic.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4167>
Knowing following:
- CMP writes to flag register the result of
applying cmod to the `src0 - src1`.
After that it stores the same value to dst.
Other instructions first store their result to
dst, and then store cmod(dst) to the flag
register.
- inst is either CMP or MOV
- inst->dst is null
- inst->src[0] overlaps with scan_inst->dst
- inst->src[1] is zero
- scan_inst wrote to a flag register
There can be three possible paths:
- scan_inst is CMP:
Considering that src0 is either 0x0 (false),
or 0xffffffff (true), and src1 is 0x0:
- If inst's cmod is NZ, we can always remove
scan_inst: NZ is invariant for false and true. This
holds even if src0 is NaN: .nz is the only cmod,
that returns true for NaN.
- .g is invariant if src0 has a UD type
- .l is invariant if src0 has a D type
- scan_inst and inst have the same cmod:
If scan_inst is anything than CMP, it already
wrote the appropriate value to the flag register.
- else:
We can change cmod of scan_inst to that of inst,
and remove inst. It is valid as long as we make
sure that no instruction uses the flag register
between scan_inst and inst.
Nine new cmod_propagation unit tests:
- cmp_cmpnz
- cmp_cmpg
- plnnz_cmpnz
- plnnz_cmpz (*)
- plnnz_sel_cmpz
- cmp_cmpg_D
- cmp_cmpg_UD (*)
- cmp_cmpl_D (*)
- cmp_cmpl_UD
(*) this would fail without changes to brw_fs_cmod_propagation.
This fixes optimisation that used to be illegal (see issue #2154)
= Before =
0: linterp.z.f0.0(8) vgrf0:F, g2:F, attr0<0>:F
1: cmp.nz.f0.0(8) null:F, vgrf0:F, 0f
= After =
0: linterp.z.f0.0(8) vgrf0:F, g2:F, attr0<0>:F
Now it is optimised as such (note change of cmod in line 0):
= Before =
0: linterp.z.f0.0(8) vgrf0:F, g2:F, attr0<0>:F
1: cmp.nz.f0.0(8) null:F, vgrf0:F, 0f
= After =
0: linterp.nz.f0.0(8) vgrf0:F, g2:F, attr0<0>:F
No shaderdb changes
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2154
Signed-off-by: Yevhenii Kolesnikov <yevhenii.kolesnikov@globallogic.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3348>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3348>
It's not used by anything anymore now that so much lowering has been
moved into NIR. Sadly, we still need on in brw_compile_gs() for
geometry shaders on Sandy Bridge. Short of a lot of pointless work,
that one's probably not going away.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
There were two errors. First, the pass could propagate conditional
modifiers from an instruction that writes on flag register to an
instruction that writes a different flag register. For example,
cmp.nz.f0.0(16) null:F, vgrf6:F, vgrf5:F
cmp.nz.f0.1(16) null:F, vgrf6:F, vgrf5:F
could be come
cmp.nz.f0.0(16) null:F, vgrf6:F, vgrf5:F
Second, if an instruction writes f0.1 has it's condition propagated, the
modified instruction will incorrectly write flag f0.0. For example,
linterp(16) vgrf6:F, g2:F, attr0:F
cmp.z.f0.1(16) null:F, vgrf6:F, vgrf5:F
(-f0.1) discard_jump(16) (null):UD
could become
linterp.z.f0.0(16) vgrf6:F, g2:F, attr0:F
(-f0.1) discard_jump(16) (null):UD
None of these cases will occur currently. The only time we use f0.1 is
for generating discard intrinsics. In all those cases, we generate a
squence like:
cmp.nz.f0.0(16) vgrf7:F, vgrf6:F, vgrf5:F
(+f0.1) cmp.z(16) null:D, vgrf7:D, 0d
(-f0.1) discard_jump(16) (null):UD
Due to the mixed types and incompatible conditions, this sequence would
never see any cmod propagation. The next patch will change this.
No shader-db changes on any Intel platform.
v2: Fix typo in comment in test case subtract_delete_compare_other_flag.
Noticed by Caio.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tests like this should have been added in 4467040cb6 ("i965/fs:
Propagate conditional modifiers from not instructions").
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
v2 (idr): Move adding the test to after adding the fix. Reordering the
two commits prevents possible headaches for git-bisect with scripts that
always do 'ninja check'.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109404
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
We emit an FBL instruction which only exists since Gen7. This prevents
the test from segfaulting when run with TEST_DEBUG=1.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Mostly a dummy git mv with a couple of noticable parts:
- With the earlier header cleanups, nothing in src/intel depends
files from src/mesa/drivers/dri/i965/
- Both Autoconf and Android builds are addressed. Thanks to Mauro and
Tapani for the fixups in the latter
- brw_util.[ch] is not really compiler specific, so it's moved to i965.
v2:
- move brw_eu_defines.h instead of brw_defines.h
- remove no-longer applicable includes
- add missing vulkan/ prefix in the Android build (thanks Tapani)
v3:
- don't list brw_defines.h in src/intel/Makefile.sources (Jason)
- rebase on top of the oa patches
[Emil Velikov: commit message, various small fixes througout]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
2017-03-13 11:16:34 +00:00
Renamed from src/mesa/drivers/dri/i965/test_fs_cmod_propagation.cpp (Browse further)
