Mapping lentgh must be a multiple of 'nonCoherentAtomSize' bytes
when using VK_WHOLE_SIZE in vkFlushMappedMemoryRanges.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12131>
All vulkan drivers have been copying anv's code to convert
VkSpecializationInfo into nir_spirv_specialization.
Recently there was a Vulkan spec change on allowed values for
VkSpecializationInfo, and all drivers got affected.
This commits creates a new helper, and uses it on all Vulkan Mesa
drivers.
v2: use (uint8_t*) castings, instead of void*, to avoid C2036 with
MSVC (detected by the CI, inspired on what radv was doing)
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12047>
Under XWayland, the first present after a window resize is sometimes
completed with COPY (seems to happen when the previous present with the
old size is pending; not really sure). The following presents are
completed with FLIP.
When a swapchain is created with an old swapchain, and
old_chain->last_present_mode is FLIP, chain->last_present_mode is set to
FLIP as well. This causes the new swapchain to be marked
VK_SUBOPTIMAL_KHR, which is sticky, if the first present is completed
with COPY.
Instead of inheriting, treat each swapchain as independent. We will
miss the case where an old swapchain is flipping but a new swapchain is
copying. But swapchain reallocation normally happens in response to
present engine state change. If the newly allocated swapchain is
copying, another reallocation is unlikely to fix that.
Fixes: 61309c2a72 ("vulkan/wsi/x11: Return VK_SUBOPTIMAL_KHR for X11")
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12030>
venus only needs to know if a WSI image is a prime blit source. In an
upcoming swapchain image rework, the prime blit destination is unknown
when the WSI image is created. Replace prime_blit_buffer by a bool.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12046>
This aligns the code with the drm format code
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Simon Ser <contact@emersion.fr>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11945>
The Vulkan 1.2 specification, section 11.2.12 ("Host Access to Device
Memory Objects") say the following:
> memory must have been created with a memory type that reports
> VK_MEMORY_PROPERTY_HOST_VISIBLE_BIT
Since there's no guarantee that there's any memory that is *both*
device-local *and* host-visible, let's just use the latter requirement.
Fixes: 8af568e4ae ("vulkan: implement wsi_win32 backend")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11848>
The Vulkan 1.2 specification, section 11.2.12 ("Host Access to Device
Memory Objects") say the following:
> If size is not equal to VK_WHOLE_SIZE, size must be greater than 0
So, mapping a zero-sized range is illegal. Let's instead map the
reported size of the image, which we already know.
Fixes: 8af568e4ae ("vulkan: implement wsi_win32 backend")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11848>
This is required by the Vulkan specification:
If pSurfaceFormats includes an entry whose value for colorSpace is
VK_COLOR_SPACE_SRGB_NONLINEAR_KHR and whose value for format is a UNORM
(or SRGB) format and the corresponding SRGB (or UNORM) format is a color
renderable format for VK_IMAGE_TILING_OPTIMAL, then pSurfaceFormats must also
contain an entry with the same value for colorSpace and format equal to the
corresponding SRGB (or UNORM) format.
Signed-off-by: Georg Lehmann <dadschoorse@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11778>
Android.mk files haven't really been supported by Mesa devs for a long
time. Most of us have been willing to update Makefile.sources if we
remember and sometimes we try to blind code some Android.mk for a new
generator. However, the reality is that it breaks regularly and ends up
being maintained by the Android community. To address this problem
another approach was implemented in !10183 utilizing the maintained
meson build system. The old Android.mk files are no longer required.
This commit was created with the following commands:
git rm **/Android.mk
git rm **/Android.*.mk
git rm **/Makefile.sources
git rm CleanSpec.mk
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/4487
Acked-by: Roman Stratiienko <r.stratiienko@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9728>
The intention is to pick the system memory for the prime blit dst, but
that is not possible when all memory types are advertised to be local.
This fixes venus over vtest (i.e., unix socket) because the driver
provides no PCI bus info and wsi_device_matches_drm_fd returns false. A
driver might also use can_present_on_device to force prime blit.
Fixes: 469875596a ("vulkan/wsi: Fix prime blits to use system memory for the destination")
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11774>
Return VK_ERROR_OUT_OF_HOST_MEMORY if
zwp_linux_dmabuf_v1_create_params fails.
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11589>
If image->buffer cannot be allocated, the value returned by
wsi_create_native_image is returned. However, if we got that far,
that value is VK_SUCCESS.
Fix it and return VK_ERROR_OUT_OF_HOST_MEMORY.
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11589>
A wl_proxy inherits its queue from its parent.
display->dmabuf.wl_dmabuf already has its queue correctly set up,
so it's unnecessary to set it again on the child
zwp_linux_buffer_params_v1 proxy.
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11589>
The sole purpose of this wl_proxy is to set the queue to
chain->display->queue. However, wl_proxy inherit their queue from
their parent, so the original wl_drm proxy already has its queue
set up properly (inherited from wl_registry).
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11589>
The intention here was to pass VK_MEMORY_PROPERTY_DEVICE_LOCAL_BIT to
select_memory_types() when requesting device local memory, or simply
pass 0 for the prime blit destination which should be in system memory.
Unfortunately, that meant we did (type.propertyFlags & 0) == 0 which
was vacuously true, causing us to not filter out device local types.
Fixes hybrid display of Vulkan apps on Intel TGL+DG1 systems.
Tested-by: Luis Felipe Strano Moraes <luis.strano@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11680>
When the linux-dmabuf protocol is available, prefer it over the old
wl_drm protocol. Previously wl_drm was used when modifiers aren't
supported, however linux-dmabuf supports formats without modifiers too.
In this case, linux-dmabuf will send a DRM_FORMAT_MOD_INVALID modifier
for each supported format [1].
All of this allows compositors to better handle these buffers, getting a
DMA-BUF and implementing features like direct scan-out.
A similar logic has been implemented for EGL [2].
In this patch, we bind to linux-dmabuf even if the driver doesn't support
modifiers. In this case the formats advertised by the compositor will
still be added to the display->dmabuf.formats list.
In wsi_wl_image_init, drop the assertions that display->drm_wrapper and
display->dmabuf.wl_dmabuf can't be both present. If the driver doesn't
support modifiers, the modifier is already set to DRM_FORMAT_MOD_INVALID.
If the parent compositor doesn't support modifiers, the modifiers list
passed to wsi_create_native_image will be empty, and the common code
will ensure that the image's modifier is set to DRM_FORMAT_MOD_INVALID.
In wsi_wl_surface_create_swapchain, create the wl_proxy proxy if we've
bound to it earlier. Don't decide to create the proxy depending on the
number of supported modifiers.
[1]: fb9b2a8731
[2]: c376865f5e
Signed-off-by: Simon Ser <contact@emersion.fr>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4942>
This function has a switch which currently duplicates the format
handling logic.
Move this logic out of the switch.
This avoids repeating the same code for each supported format and
prepares the work for proper DRM_FORMAT_MOD_INVALID handling.
Signed-off-by: Simon Ser <contact@emersion.fr>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4942>
Move and rename warn_non_conformant_implementation() to common location
of src/vulkan/util/vk_util.c as vk_warn_non_conformant_implementation().
In freedreno/ci, move MESA_VK_IGNORE_CONFORMANCE_WARNING to common
location of .baremetal-deqp-test-freedreno-vk.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11563>
This code was written but (rightfully) commented out, because it
referenced non-existing vulkan formats.
The correct vulkan analogs come in the form _PACK16 and _PACK32,
respectively, which have their component ordering in high->low bit
order. This is compatible with the DRM format ordering on little endian
systems, so we can just implement them all in the obvious way. On big
endian systems, the _PACKN formats have no analogs, because the
corresponding DRM formats are specified as always being little endian.
I implemented all of the formats I could, while excluding those that
don't map to vulkan at all (e.g. BGRA1010102), and commenting out the
ones that require an extra extension (e.g. ARGB4444) because they
probably need to be checked for extension presence first.
List slightly re-ordered to make it more neatly organized. Tested
working with the 2101010 and 565 variants. Was not able to test the 4444
or 1555 formats, but I verified the channel order was correct so they
should be working in theory.
Signed-off-by: Niklas Haas <git@haasn.xyz>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9737>
Implements the two functions defined in the extension
VK_EXT_acquire_drm_display, vkAcquireDrmDisplayEXT and vkGetDrmDisplayEXT.
Signed-off-by: Simon Zeni <simon@bl4ckb0ne.ca>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Simon Ser <contact@emersion.fr>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11014>
Modifies the signature on `wsi_display_get_connector` to retrieve the
connector of an arbitrary DRM FD instead of the one taken from the
wsi_display.
Signed-off-by: Simon Zeni <simon@bl4ckb0ne.ca>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11014>
this simplifies implementations since a lot of the code is going to be
copy/pasted around, enabling related tweaks to be made in a centralized place
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11496>
No need to cast to a wl_proxy, there is a wl_surface variant
available.
No need to cache the result of get_version(), this is just a
one-line getter and doesn't perform any roundtrip.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11420>
We cannot use os_{malloc,free,realloc}_aligned because
os_realloc_aligned needs the old size (for memcpy).
v2: no max_align_t on MSVC
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11117>
Always chain wsi_image_create_info to VkImageCreateInfo, which indicates
that the image is a wsi image and can be transitioned to/from
VK_IMAGE_LAYOUT_PRESENT_SRC_KHR.
Add prime_blit_buffer to the struct as well. When set, it indicates the
prime blit destination and implies that the image is a prime blit
source.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Yiwei Zhang <zzyiwei@chromium.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10789>
Zink uses this, as it doesn't need to differentiate all the entrypoints.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11045>
The deqp test for it expects that the unused array elements are untouched,
so make sure they don't get replaced with random stack data.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10737>
MSVC uses different decorated names for 32-bit versus 64-bit. Declare
all argument sizes for 32-bit because computing the actual size would be
difficult.
Fixes: 9be7aa3fc8 ("vulkan: Add a common entrypoint table generator")
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10573>
On Wayland, if the wl_drm interface is not available, for example if the
compositor is using the proprietary NVIDIA driver along with their egl-wayland
library, the device_select layer will fail to initialize. However, the failure
path will unconditionally call wl_drm_destroy even though info.wl_drm would be
NULL in that case. This can cause a segfault in libwayland-client.so.
To fix this, check if info.wl_drm is NULL before calling wl_drm_destroy. This
way, initialization will fail gracefully even if that interface is not present.
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10598>
Disabling the check allows swapchains to be created on a remote
X Server using the xlib backend, which in turn allows Vulkan apps,
such as swapchain_images in Vulkan Samples, to run.
Closes#4323
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10349>
The current approach likley breaks icl and clang-cl, but it seems that
the problem isn't even really related to MSVC, but to Meson's Visual
Studio backend, as such, let's use link-whole unless we're using a
Visual Studio backend.
Fixes: 48d31a6280
("meson: link vulkan_util with link_whole on mingw")
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Acked-by: James Park <jpark37@lagfreegames.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10506>
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Fixes: bd1705a480 ("vulkan: Make vk_debug_report_callback derive from vk_object_base")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10433>
Currently, a resized window results in an VK_ERROR_OUT_OF_DATE_KHR. But,
this seems to go against the spec, which suggests returning
VK_SUBOPTIMAL_KHR if the surface extent no longer matches the window
extent. (It does not *require* the WSI actually scale the contents, only
encourages doing so "if possible")
More to the point, VK_SUBOPTIMAL_KHR is the correct status to return if
the client *can* continue presenting to this swapchain, even if the
result will look wrong / "suboptimal". It's the client's decision on
when exactly to recreate the swapchain in this case, and the client may
very well end up wanting to continue presenting for a frame or two, to
prevent flooding the driver with swapchain recreations (which can result
in the window appearing visually "frozen" while resizing).
This change makes live resizing *significantly* smoother in e.g. mpv.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3196>
If the swapchain already does not match the current geometry at the time
of creation, set the initial status to VK_SUBOPTIMAL_KHR as a way to
inform clients to please resize the swapchain.
This solves a race condition where users have no way of knowing if the
surface extent changed in between the user querying the current extent
and creating the swapchain, and might end up missing a resize event
because of it, since XCB_PRESENT_CONFIGURE_NOTIFY is not yet being
handled.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3196>
Until now, the WSI code would rely on VK_EXT_pci_bus_info to check if the
WSI device matched the DRM device used for display. If they matched, then
it would allow direct presentation of the swapchain images, otherwise
it would fallback to a blit path through a linear buffer.
Unfortunately, this only works for PCI devices, so embedded GPUs would
always fail the test and fallback to the prime blit path, incurring in a
performance penalty due to the extra blit.
With this change driver backends have the possibility to attach a
callback to the WSI device to take control over that decision and have
freedom to make that choice according to their own platform particularities.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5917>
Present operations do not necessarily complete after the requested
time; if the CRTC has been blanked, they will complete
immediately. This means we cannot use the MSC value to tell when a
present has finished.
Instead of using MSC, track whether each present is complete by serial
number, which is the low 32-bits of the SBC value. This value is
provided in the present_pixmap request and returned in the present
complete notify event.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
