That flow control may be trying to avoid invalid loads. On at least
some platforms, those loads can also be expensive.
No shader-db changes on any Intel platform (even with the later patch
"intel/compiler: More peephole select").
v2: Add a 'indirect_load_ok' flag to nir_opt_peephole_select. Suggested
by Rob. See also the big comment in src/intel/compiler/brw_nir.c.
v3: Use nir_deref_instr_has_indirect instead of deref_has_indirect (from
nir_lower_io_arrays_to_elements.c).
v4: Fix inverted condition in brw_nir.c. Noticed by Lionel.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
If there is a CMP.NZ that compares a single component (via a .zzzz
swizzle, for example) with 0, it can propagate its conditional modifier
back to a previous CMP that writes only that component. The specific
case that I saw was:
cmp.l.f0(8) g42<1>.xF g61<4>.xF (abs)g18<4>.zF
...
cmp.nz.f0(8) null<1>D g42<4>.xD 0D
In this case we can just delete the second CMP.
No changes on Broadwell or Skylake because they do not use the vec4
backend. Also no changes on GM45 or Iron Lake.
Sandy Bridge, Ivy Bridge, and Haswell had similar results. (Sandy Bridge shown)
total instructions in shared programs: 10856676 -> 10852569 (-0.04%)
instructions in affected programs: 228322 -> 224215 (-1.80%)
helped: 1331
HURT: 0
helped stats (abs) min: 1 max: 7 x̄: 3.09 x̃: 4
helped stats (rel) min: 0.11% max: 6.67% x̄: 1.88% x̃: 1.83%
95% mean confidence interval for instructions value: -3.19 -2.99
95% mean confidence interval for instructions %-change: -1.93% -1.83%
Instructions are helped.
total cycles in shared programs: 154788865 -> 154732047 (-0.04%)
cycles in affected programs: 2485892 -> 2429074 (-2.29%)
helped: 1097
HURT: 59
helped stats (abs) min: 2 max: 168 x̄: 51.96 x̃: 64
helped stats (rel) min: 0.12% max: 12.70% x̄: 3.44% x̃: 2.22%
HURT stats (abs) min: 2 max: 16 x̄: 3.02 x̃: 2
HURT stats (rel) min: 0.18% max: 0.83% x̄: 0.64% x̃: 0.71%
95% mean confidence interval for cycles value: -51.04 -47.26
95% mean confidence interval for cycles %-change: -3.40% -3.07%
Cycles are helped.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
The (-abs(x) >= 0) => (x == 0) optimization is removed from the vec4 and
scalar parts. In the VS part, adding the new pattern was not
helpful. The pattern that is removed is really old, and it has been
handled by NIR for ages.
All Gen7+ platforms had similar results. (Broadwell shown)
total instructions in shared programs: 14715715 -> 14715709 (<.01%)
instructions in affected programs: 474 -> 468 (-1.27%)
helped: 6
HURT: 0
helped stats (abs) min: 1 max: 1 x̄: 1.00 x̃: 1
helped stats (rel) min: 1.12% max: 1.35% x̄: 1.28% x̃: 1.35%
95% mean confidence interval for instructions value: -1.00 -1.00
95% mean confidence interval for instructions %-change: -1.40% -1.15%
Instructions are helped.
total cycles in shared programs: 559569911 -> 559569809 (<.01%)
cycles in affected programs: 5963 -> 5861 (-1.71%)
helped: 6
HURT: 0
helped stats (abs) min: 16 max: 18 x̄: 17.00 x̃: 17
helped stats (rel) min: 1.45% max: 1.88% x̄: 1.73% x̃: 1.85%
95% mean confidence interval for cycles value: -18.15 -15.85
95% mean confidence interval for cycles %-change: -1.95% -1.51%
Cycles are helped.
Iron Lake and Sandy Bridge had similar results. (Iron Lake shown)
total instructions in shared programs: 7780915 -> 7780913 (<.01%)
instructions in affected programs: 246 -> 244 (-0.81%)
helped: 2
HURT: 0
total cycles in shared programs: 177876108 -> 177876106 (<.01%)
cycles in affected programs: 3636 -> 3634 (-0.06%)
helped: 1
HURT: 0
GM45
total instructions in shared programs: 4799152 -> 4799151 (<.01%)
instructions in affected programs: 126 -> 125 (-0.79%)
helped: 1
HURT: 0
total cycles in shared programs: 122052654 -> 122052652 (<.01%)
cycles in affected programs: 3640 -> 3638 (-0.05%)
helped: 1
HURT: 0
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
In an instruction sequence like
cmp(8).ge.f0.0 vgrf17:D, vgrf2.xxxx:D, vgrf9.xxxx:D
(+f0.0) sel(8) vgrf1:UD, vgrf8.xyzw:UD, vgrf1.xyzw:UD
The other fields of vgrf17 may be unused, but the CMP still needs to
generate the other flag bits.
To my surprise, nothing in shader-db or any test suite appears to hit
this. However, I have a change to brw_vec4_cmod_propagation that
creates cases where this can happen. This fix prevents a couple dozen
regressions in that patch.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 5df88c20 ("i965/vec4: Rewrite dead code elimination to use live in/out.")
We were not using the view mask for depth clears, causing only the
first view to be cleared.
Fixes: 2e86f6b259 "radv: Add multiview clears."
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
The switch directly after the check has a default case that returns
NULL too, so the effective return value is not changed. Also this
check is wrong once we start dealing with formats introduced by an
extension (e.g. YUV formats).
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
I botched some copy-and-paste and clamped to signed int max instead of
uint max. Fixes KHR-GL46.shader_image_load_store.multiple-uniforms on
skl.
Fixes: d3e046e76c ("nir: Pull some of intel's image load/store format
conversion to nir_format.h")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
I thought the value was correctly propagated, but actually not.
Fixes: 2ac6d55f38 ("radv: bump reported version to 1.1.90")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Now at version 2 with the fixed header.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 191a1dce92 ('nir: Add 1-bit Boolean opcodes')
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Fixes: f8d5b377c8 ('radv: set cb base tile swizzles for MRT speedups (v4)')
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108116
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
nir_sweep already marks all metadata invalid, so it is safe to release
the memory here too.
mean soft fp64 using uint64: 1,342,759,331 => 1,010,670,475
gfxbench5 aztec ruins high 11: 63,555,571 => 61,889,811
deus ex mankind divided 148: 62,845,304 => 62,829,640
deus ex mankind divided 2890: 71,922,686 => 71,922,686
dirt showdown 676: 69,238,607 => 69,238,607
dolphin ubershaders 210: 77,822,072 => 77,822,072
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Found using pahole.
Changes in peak memory usage according to Valgrind massif:
mean soft fp64 using uint64: 1,343,991,403 => 1,342,759,331
gfxbench5 aztec ruins high 11: 63,619,971 => 63,555,571
deus ex mankind divided 148: 62,887,728 => 62,845,304
deus ex mankind divided 2890: 72,399,750 => 71,922,686
dirt showdown 676: 69,464,023 => 69,238,607
dolphin ubershaders 210: 78,359,728 => 77,822,072
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Replace the old array in each value with a hash table in each value.
Changes in peak memory usage according to Valgrind massif:
mean soft fp64 using uint64: 5,499,875,082 => 1,343,991,403
gfxbench5 aztec ruins high 11: 63,619,971 => 63,619,971
deus ex mankind divided 148: 62,887,728 => 62,887,728
deus ex mankind divided 2890: 72,402,222 => 72,399,750
dirt showdown 676: 74,466,431 => 69,464,023
dolphin ubershaders 210: 109,630,376 => 78,359,728
Run-time change for a full run on shader-db on my Haswell desktop (with
-march=native) is 1.22245% +/- 0.463879% (n=11). This is about +2.9
seconds on a 237 second run. The first time I sent this version of this
patch out, the run-time data was quite different. I had misconfigured
the script that ran the test, and none of the tests from higher GLSL
versions were run. These are generally more complex shaders, and they
are more affected by this change.
The previous version of this patch used a single hash table for the
whole phi builder. The mapping was from [value, block] -> def, so a
separate allocation was needed for each [value, block] tuple. There was
quite a bit of per-allocation overhead (due to ralloc), so the patch was
followed by a patch that added the use of the slab allocator. The
results of those two patches was not quite as good:
mean soft fp64 using uint64: 5,499,875,082 => 1,343,991,403
gfxbench5 aztec ruins high 11: 63,619,971 => 63,619,971
deus ex mankind divided 148: 62,887,728 => 62,887,728
deus ex mankind divided 2890: 72,402,222 => 72,402,222 *
dirt showdown 676: 74,466,431 => 72,443,591 *
dolphin ubershaders 210: 109,630,376 => 81,034,320 *
The * denote tests that are better now. In the tests that are the same
in both patches, the "after" peak memory usage was at a different
location. I did not check the local peaks.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
D3D Booleans use a 32-bit 0/-1 representation. Because this previously
matched NIR exactly, we didn't have to really optimize for it. Now that
we have 1-bit Booleans, we need some specific optimizations to chew
through the D3D12-style Booleans.
Shader-db results on Kaby Lake:
total instructions in shared programs: 15136811 -> 14967944 (-1.12%)
instructions in affected programs: 2457021 -> 2288154 (-6.87%)
helped: 8318
HURT: 10
total cycles in shared programs: 373544524 -> 359701825 (-3.71%)
cycles in affected programs: 151029683 -> 137186984 (-9.17%)
helped: 7749
HURT: 682
total loops in shared programs: 4431 -> 4399 (-0.72%)
loops in affected programs: 32 -> 0
helped: 21
HURT: 0
total spills in shared programs: 10290 -> 10051 (-2.32%)
spills in affected programs: 2532 -> 2293 (-9.44%)
helped: 18
HURT: 18
total fills in shared programs: 22203 -> 21732 (-2.12%)
fills in affected programs: 3319 -> 2848 (-14.19%)
helped: 18
HURT: 18
Note that a large chunk of the improvement fixing regressions caused by
switching to 1-bit Booleans. Previously, our ability to optimize D3D
booleans was improved by using the D3D representation directly in NIR.
Now that NIR does 1-bit bools, we need a few more optimizations.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This is a squash of a few distinct changes:
glsl,spirv: Generate 1-bit Booleans
Revert "Use 32-bit opcodes in the NIR producers and optimizations"
Revert "nir/builder: Generate 32-bit bool opcodes transparently"
nir/builder: Generate 1-bit Booleans in nir_build_imm_bool
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
We also enable it in all of the NIR drivers.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
We also have to add support for 1-bit integers while we're here so we
get 1-bit variants of iand, ior, and inot.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This just makes it nicely scale across bit sizes.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This commit adds support for 1-bit Booleans and integers. Booleans
obviously take a value of true or false. Because we have to define the
semantics of 1-bit signed and unsigned integers, we define uint1_t to
take values of 0 and 1 and int1_t to take values of 0 and -1. 1-bit
arithmetic is then well-defined in the usual way, just with fewer bits.
The definition of int1_t and uint1_t doesn't usually matter but we do
need something for purposes of constant folding.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This commit contains three related changes. First, we define boolN_t
for N = 8, 16, and 64 and move the definition of boolN_vec to the loop
with the other vec definitions. Second, there's no reason why we need
the != 0 on the source because that happens implicitly when it's
converted to bool. Third, for destinations, we use a signed integer
type and just do -(int)bool_val which will give us the 0/-1 behavior we
want and neatly scales to all bit widths.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This is a squash of a bunch of individual changes:
nir/builder: Generate 32-bit bool opcodes transparently
nir/algebraic: Remap Boolean opcodes to the 32-bit variant
Use 32-bit opcodes in the NIR producers and optimizations
Generated with a little hand-editing and the following sed commands:
sed -i 's/nir_op_ball_fequal/nir_op_b32all_fequal/g' **/*.c
sed -i 's/nir_op_bany_fnequal/nir_op_b32any_fnequal/g' **/*.c
sed -i 's/nir_op_ball_iequal/nir_op_b32all_iequal/g' **/*.c
sed -i 's/nir_op_bany_inequal/nir_op_b32any_inequal/g' **/*.c
sed -i 's/nir_op_\([fiu]lt\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]ge\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]ne\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]eq\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fi]\)ne32g/nir_op_\1neg/g' **/*.c
sed -i 's/nir_op_bcsel/nir_op_b32csel/g' **/*.c
Use 32-bit opcodes in the NIR back-ends
Generated with a little hand-editing and the following sed commands:
sed -i 's/nir_op_ball_fequal/nir_op_b32all_fequal/g' **/*.c
sed -i 's/nir_op_bany_fnequal/nir_op_b32any_fnequal/g' **/*.c
sed -i 's/nir_op_ball_iequal/nir_op_b32all_iequal/g' **/*.c
sed -i 's/nir_op_bany_inequal/nir_op_b32any_inequal/g' **/*.c
sed -i 's/nir_op_\([fiu]lt\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]ge\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]ne\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]eq\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fi]\)ne32g/nir_op_\1neg/g' **/*.c
sed -i 's/nir_op_bcsel/nir_op_b32csel/g' **/*.c
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Later in this series, bool is not going to imply 32-bit.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This was originally added for the out-of-tree Mali driver but I think
we've all agreed it's easy enough for them to just do in their back-end.
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Shader-db results on Kaby Lake:
total instructions in shared programs: 15072525 -> 15072525 (0.00%)
instructions in affected programs: 0 -> 0
helped: 0
HURT: 0
This helps prevent regressions in later commits.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Instead of looking at input_sizes[i] which contains the number of
components for each source, we look at the bit size of input_types[i].
This fixes a regression in the 1-bit boolean series though I have no
idea how we haven't seen it before now.
Fixes: 35baee5dce "nir/constant_folding: fix incorrect bit-size check"
Fixes: 9076c4e289 "nir: update opcode definitions for different bit sizes"
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The previous code was creating a boolean by doing an arithmetic right-
shift by 31 which produces a boolean which is true if the argument is
negative. This is the same as the expression r < 0 which is much
simpler and doesn't depend on NIR's representation of booleans.
Reviewed-by: Eric Anholt <eric@anholt.net>
This is so that we can split different types of loads more easily.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
CodeGenOptions were moved to Basic.
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Aaron Watry <awatry@gmail.com>
Tested-by: Aaron Watry <awatry@gmail.com>
Reviewed-by: Kai Wasserbäch <kai@dev.carbon-project.org>
CC: mesa-stable@lists.freedesktop.org
Sadly, the GLX_USE_APPLEGL and GLX_USE_WINDOWSGL cases are not identical
(because GLX_USE_WINDOWSGL uses vtables rather than a maze of ifdefs)
Include <sys/time.h> again, as functions prototyped by it are used in
the GLX_USE_WINDOWSGL path.
Make the include guard around the __glxGetMscRate() definition match the
one at it's declaration again, as it's referenced from dri_common.c
which is built for GLX_USE_WINDOWSGL.
Fixes: a95ec138 ("glx: mandate xf86vidmode only for "drm" dri platforms")
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
These have all been floating in my head, and while I've thought about
encoding them in issues on gitlab once they're enabled, they also make
sense to just have in the area of the code you'll need to work in.
Follows 3954331aff ("vc4: Pull uinfo->data[i] dereference out to the top
of the loop.") which showed a large performance win for vc4, but also
cleans up the code a decent bit.
