This effectively factorizes a couple of similar routines.
v2 (Neil Roberts): Non-trivial rebase on master
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Eduardo Lima Mitev <elima@igalia.com>
Signed-off-by: Neil Roberts <nroberts@igalia.com>
Some symbols gathered in the symbols table during parsing are needed
later for the compile and link stages, so they are moved along the
process. Currently, only functions and non-temporary variables are
copied between symbol tables. However, the built-in gl_PerVertex
interface blocks are also needed during the linking stage (the last
step), to match re-declared blocks of inter-stage shaders.
This patch adds a new utility function that will factorize current code
that copies functions and variables between two symbol tables, and in
addition will copy explicitly declared gl_PerVertex blocks too.
The function will be used in a subsequent patch.
v2 (Neil Roberts):
Allow the src symbol table to be NULL and explicitly copy the
gl_PerVertex symbols in case they are not referenced in the exec_list.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Eduardo Lima Mitev <elima@igalia.com>
Signed-off-by: Neil Roberts <nroberts@igalia.com>
There are two callers of the constructor, and they are right next to
each other. Move the "#anon_struct" name handling to the parser so that
the conditional can be removed.
I've also deleted part of the comment (about the memory leak) because I
don't think it's quite accurate or relevant.
text data bss dec hex filename
8310399 269336 294072 8873807 87674f 32-bit i965_dri.so before
8310339 269336 294072 8873747 876713 32-bit i965_dri.so after
7845611 346552 420592 8612755 836b93 64-bit i965_dri.so before
7845579 346552 420592 8612723 836b73 64-bit i965_dri.so after
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
There are two issues with the current implementation. First, it relies
on the layout(local_size_*) happening in the same shader as the main
function, and secondly it doesn't work for variable group sizes.
In both cases, the simplest fix is to move the setup of these derived
values to a later time, similar to how the gl_VertexID workarounds are
done. There already exist system values defined for both of the derived
values, so we use them unconditionally, and lower them after linking is
performed.
While we're at it, we move to using gl_LocalGroupSizeARB instead of
gl_WorkGroupSize for variable group sizes.
Also the dead code elimination avoidance can be removed, since there
can be situations where gl_LocalGroupSizeARB is needed but has not been
inserted for the shader with main function. As a result, the lowering
code has to insert its own copies of the system values if needed.
Reported-by: Stephane Chevigny <stephane.chevigny@polymtl.ca>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103393
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
c7affbf687 enabled GLSLOptimizeConservatively on some
drivers. The idea was to speed up compile times by running
the GLSL IR passes only once each time do_common_optimization()
is called. However loop unrolling can create a big mess and
with large loops can actually case compile times to increase
significantly due to a bunch of redundant if statements being
propagated to other IRs.
Here we make sure to clean things up before moving on.
There was no measureable difference in shader-db compile times,
but it makes compile times of some piglit tests go from a couple
of seconds to basically instant.
The shader-db results seemed positive also:
Totals:
SGPRS: 2829456 -> 2828376 (-0.04 %)
VGPRS: 1720793 -> 1721457 (0.04 %)
Spilled SGPRs: 7707 -> 7707 (0.00 %)
Spilled VGPRs: 33 -> 33 (0.00 %)
Private memory VGPRs: 3140 -> 2060 (-34.39 %)
Scratch size: 3308 -> 2180 (-34.10 %) dwords per thread
Code Size: 79441464 -> 79214616 (-0.29 %) bytes
LDS: 436 -> 436 (0.00 %) blocks
Max Waves: 558670 -> 558571 (-0.02 %)
Wait states: 0 -> 0 (0.00 %)
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Having this separate just makes the code harder to follow, and
requires an extra walk of the IR.
Reviewed-by: Thomas Helland <thomashelland90@gmail.com>
As a result, unnamed structs defined in different places of the program
are considered the same types if they have the same fields in the same
order.
This will simplify matching of global variables whose type is an unnamed
struct.
It also fixes a memory leak when the same shader containing unnamed
structs is compiled over and over again: instead of creating a new type
each time, the existing type is re-used.
Finally, this does have the effect that some previously rejected programs
are now accepted, such as:
struct {
float a;
} s1;
struct {
float a;
} s2;
s2 = s1;
C/C++ do not allow that, but GLSL does seem to want to treat unnamed
structs with the same fields as the same type at least during linking
(and apparently, some applications require it), so it seems odd to treat
them as different types elsewhere.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This changes the logic during the conversion of the declaration list
struct S {
...
} v;
from AST to IR, but should not change the end result.
When assigning the type of v, instead of looking `S' up in the symbol
table, we read the type from the member variable of ast_struct_specifier.
This change is necessary for the subsequent change to how anonymous types
are handled.
v2: remove a type override when redefining a structure; should be
the same type in that case anyway
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This adds bindless_sampler and bound_sampler (and respectively
bindless_image and bound_image) to the parser.
v3: - add an extra space in apply_bindless_qualifier_to_variable()
- fix indentation in merge_qualifier()
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This also adds the extension to the standalone GLSL compiler.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This moves the hashing of shader source for the cache lookup to before
the preprocessor. In our experience, shaders are unlikely to hash the
same after preprocessing if they didn't hash the same before, so we can
skip preprocessing for cache hits.
Improves Deus Ex start-up times with a warm cache from ~30 seconds to
~22 seconds.
Also fixes the leaking of state.
V2: fix indentation
v3: add the value of MESA_EXTENSION_OVERRIDE to the hash of the shader.
Tested-by (v2): Grazvydas Ignotas <notasas@gmail.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
Due to a max limit of 65,536 entries on the index table that we use to
decide if we can skip compiling individual shaders, it is very likely
we will have collisions.
To avoid doing too much work when the linked program may be in the
cache this patch delays calling the optimisations until link time.
Improves cold cache start-up times on Deus Ex by ~20 seconds.
When deleting the cache index to simulate a worst case scenario
of collisions in the index, warm cache start-up time improves by
~45 seconds.
V2: fix indentation, make sure to call optimisations on cache
fallback, make sure optimisations get called for XFB.
Tested-by: Grazvydas Ignotas <notasas@gmail.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This will allow to hash additional data into the cache keys or even
change the hashing algorithm easily, should we decide to do so.
v2: don't try to compute key (and crash) if cache is disabled
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Unused/unchecked by any of the callers.
v2: Fix the glsl cases that have crept in since v1
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Grazvydas Ignotas <notasas@gmail.com>
Because we optimistically skip compiling shaders if we have seen them
before we may need to compile them later at link time if they haven't
yet been use in a specific combination to create a program.
Rather than always recompiling we take advantage of the
gl_compile_status enum introduced in the previous patch to only
compile when we have previously skipped compilation.
This helps with regressions in app start-up times on cold cache
runs, compared with no cache.
Deus Ex: Mankind Divided start-up times:
cache disabled: ~3m15s
cold cache master: ~4m23s
cold cache with this patch: ~3m33s
Acked-by: Marek Olšák <marek.olsak@amd.com>
This will allow us to tell if a shader really has been compiled or
if the shader cache has just seen it before.
Acked-by: Marek Olšák <marek.olsak@amd.com>
Previously, when q.subroutine was set to 1, a new subroutine
declaration was added to the AST, while 0 meant a subroutine
definition has been detected by the parser.
Thus, setting the q.subroutine flag in both situations is
obviously wrong because a new type identifier is added instead
of trying to match the declaration. To fix it up, introduce
ast_type_qualifier::is_subroutine_decl() to differentiate
declarations and definitions easily.
This fixes a regression with:
arb_shader_subroutine/compiler/direct-call.vert
Cc: Mark Janes <mark.a.janes@intel.com>
Fixes: be8aa76afd ("glsl: remove unecessary flags.q.subroutine_def")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100026
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This bit is definitely not necessary because subroutine_list
can be used instead. This frees one more bit in the flags.q
struct which is nice because arb_bindless_texture will need
4 bits for the new layout qualifiers.
No piglit regressions found (including compiler tests) with
"-t subroutine".
v2: set the subroutine flag for validating illegal flags
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
The scenario is:
glShaderSource
glCompileShader <-- deferred due to cache hit of shader
glShaderSource <-- with new source code
glAttachShader
glLinkProgram <-- no cache hit for program
At this point we need to compile the original source when we
fallback.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
The hash key for glsl metadata is a hash of the hashes of each GLSL
source string.
This commit uses the put_key/get_key support in the cache put the SHA-1
hash of the source string for each successfully compiled shader into the
cache. This allows for early, optimistic returns from glCompileShader
(if the identical source string had been successfully compiled in the past),
in the hope that the final, linked shader will be found in the cache.
This is based on the intial patch by Carl.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Passes the newly added piglit test for this extension on i965.
V2: Fix comments by Ilia.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Previously if you used MESA_GL_VERSION_OVERRIDE=3.3COMPAT, Mesa exposed
an OpenGL 3.3 compatibility profile context (with various unimplemented
features and bugs), but still refused to compile shaders with
#version 330 compatibility
This patch simply adds a small bit of plumbing to let that through.
Of course the same caveats apply: compatibility profile is still not
supported (and will not be supported), so there are no guarantees that
anything will work.
Tested-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Correctly handled by all the build systems.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
define __STDC_FORMAT_MACROS and include <inttypes.h> (same as
ir_builder_print_visitor.cpp already does).
Otherwise, some mingw build errors out (since
8e7e1ae036 and
bbce1c538d presumably) with:
src/compiler/glsl/ir_print_visitor.cpp:479:40: error: expected ‘)’ before ‘PRIu64’
case GLSL_TYPE_UINT64:fprintf(f, "%" PRIu64, ir->value.u64[i]); break;
(Note even with that fix I get other format specifier warnings:
src/compiler/glsl/ir_print_visitor.cpp:473:47:
warning: unknown conversion type character ‘a’ in format [-Wformat=]
fprintf(f, "%a", ir->value.f[i]);
^
src/compiler/glsl/ir_print_visitor.cpp:473:47:
warning: too many arguments for format [-Wformat-extra-args]
but it still compiles at least)
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
This adds support for 64-bit integer constants to the parser,
ast and ir.
v2: fix a few issues found in testing.
v3: Add missing ir_constant copy contructor support.
v4: Use PRIu64 and PRId64 in printfs in glsl_parser_extras.cpp.
Suggested by Nicolai. Rebase on Marek's linalloc changes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> [v2]
Reviewed-by: Matt Turner <mattst88@gmail.com> [v3]
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This just adds the basic boilerplate support.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Here we remove the single use of this field in gl_linked_shader
which allows us to move the field out of gl_shader_info
While we are at it we rewrite link_xfb_stride_layout_qualifiers()
to be more clear.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
There is no reason for this to be in the shared gl_shader_info or
to copy it to gl_program at the end of linking (its already there).
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This is only used by gl_linked_shader as a temp during linking
so use a temp there instead.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This is only used by gl_linked_shader as a temp during linking
so use a temp there instead.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This is only used by gl_linked_shader as a temp during linking
so use a temp there instead.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This is never used in gl_linked_shader other than as a temp
during linking so just use a temp instead.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
We also move EarlyFragmentTests out of the gl_shader_info struct
as it is now only used by gl_shader.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
It feels weird using GL_* enums in a Vulkan driver.
v2: Fix the TESS_SPACING -> PIPE_TESS_SPACING conversion.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This will let us to make _CurrentFragmentProgram a gl_program pointer
allowing for simpilifications to be made.
We also need to add a field to gl_shader to hold it during parsing.
In gl_program we put it inside a union in anticipation of moving
more fields here that can be only fs or vertex stage fields.
Reviewed-by: Eric Anholt <eric@anholt.net>
This extension allows the fragment shader to control whether values in
gl_SampleMaskIn[] reflect the coverage after application of the early
depth and stencil tests.
Signed-off-by: Plamena Manolova <plamena.manolova@intel.com>
Reviewed-by: Chris Forbes <chrisforbes@google.com>
This reverts commit 4c86399378.
The commit was erroneous because the ast_layout_expression class was
created to hold a list of values for a layout-qualifier-name which is
allowed to appear in more than one expression in the same
shader/program but not to hold different values.
In other words, the list is used for an after check that all the
declared values for a layout-qualifier-name are consistent.
Therefore, the values stored must match always, not just for
"max_vertices" or any other eventual layout-qualifier-name.
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
