Same layout as NV12, but 16bit per channel instead of 8.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mark Thompson <sw@jkqxz.net>
all drivers support it
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Tested-by: Brian Paul <brianp@vmware.com> (VMware driver only)
When st_context_flush() is called with ST_FLUSH_WAIT,
the function will return after the fence is completed.
Reviewed-by: Brian Paul <brianp@vmware.com>
sizeof(struct pipe_draw_info) = 104 -> 88
Also, vertices_per_patch is switched to ubyte, because it can't be more
than 32.
Seemed-reasonable-to: Roland Scheidegger
Not used and not widely supported. Use MIN+MAX instead.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Mesa currently doesn't allow to create 3.1+ compatibility profiles
mainly because various features are unimplemented and bugs can
happen.
However, some buggy apps request a compat profile without using
any old features unimplemented in mesa, and they fail to start.
This option should help some games to run but it's not enough
for all (eg. Dying Light).
v2: - s/force_compat_profile/allow_higher_compat_version
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Edmondo Tommasina <edmondo.tommasina@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
For lower memory usage and more efficient updates of the buffer residency
list. (e.g. if drivers keep seeing the same buffer for many consecutive
"add" calls, the calls can be turned into no-ops trivially)
v2: add const_uploader, add documentation
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Tested-by: Edmondo Tommasina <edmondo.tommasina@gmail.com>
Tested-by: Charmaine Lee <charmainel@vmware.com>
Nouveau does not currently have logic to implement this as a library
function. Even though such a library could be written, there's no big
advantage to do it that way for now given that int64 is a very uncommon
use-case. Allow a driver to expose INT64 without supporting division and
modulo operations.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Make the cap consistent with PIPE_CAP_INT64.
Aside from the hypothetical case of using draw for vertex shaders (and
actually caring about doubles...), every implementation supports doubles
either nowhere or everywhere.
Also, st/mesa didn't even check the cap correctly in all supported
shader stages.
While at it, add a missing LLVM version check for 64-bit integers in
radeonsi. This is conservative: judging by the log, LLVM 3.8 might be
sufficient, but there are probably bugs that have been fixed since then.
v2: fix clover (Marek)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Analogous to previous commits.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
v1.1: move to using a normal CAP. (Marek)
v2: fill in the cap everywhere
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This will be useful for proper D3D9 emulation, where this behavior is
expected by some shaders.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Add a hook to tell drivers that an imported resource may have changed
and they need to update their internal derived resources.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
This is so that we can differentiate between flushing any framebuffer
reading caches from regular sampler caches.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Double-precision division, to allow more precision than a DRCP + DMUL
sequence.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This is for geometry shader outputs. Without it, drivers have no way of
knowing which stream each output is intended for, and have to
conservatively write all outputs to all streams.
Separate stream numbers for each component are required due to output
packing.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This enables gallium support for EGL_ANDROID_native_fence_sync, for
drivers which support PIPE_CAP_NATIVE_FENCE_FD.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
This will be needed for explicit synchronization with devices outside
the gpu, ie. EGL_ANDROID_native_fence_sync.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Drivers that support this benefit by saving one lowering pass in the
GLSL-to-TGSI conversion.
radeonsi already supports this because all outputs are stored in temporary
variables before the export (except for TCS outputs, which have always
been readable in TGSI anyway due to their special semantics).
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This allows the driver to signal that it can't handle random
interleaving of attributes across buffers. This is required for
ARB_transform_feedback3, and it's initialized to whatever the previous
value of PIPE_CAP_STREAM_OUTPUT_PAUSE_RESUME was except for nv50 where
it is disabled. Note that the proprietary drivers never expose
ARB_transform_feedback3 on any GT21x's (where nouveau previously did),
and after some effort I was unable to get it to work.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Historically we use "device name" for the name of the kernel module and
"driver name" for the dri/other driver.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Likely unused since day 1, although I've only checked back until the
st/dri unification with commit 29ca7d2c94 ("st/dri: merge dri/drm and
dri/sw backends")
Based on the comment, referencing drmOpenByName it's not something we
want to bring back.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
For performance tuning in drivers. It filters out window system
framebuffers and OpenGL renderbuffers.
radeonsi will use this to guess whether a depth buffer will be read
by a shader. There is no guarantee about what will actually happen.
This is a departure from PIPE_BIND flags which are defined to be strict
but they are useless in practice.
Acked-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This is a screen cap because drivers are expected to support it either
for all shader types or for none of them.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
v3: - use a new case statement in r600_pipe_common.c
- fix compilation of softpipe...
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Implement support for power based sensors, reporting units in
milli-watts and watts.
Also, minor cleanup - change the related if block to a switch.
Tested with two different power sensors, including the nouveau
'power1' sensors on a GTX950 card.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
V8: Feedback based on peer review
convert if block into a switch
Constify some func args
V7: Increase precision when measuring lmsensors volts
Flatten patch series.
V6: Feedback based on peer review
Simplify sensor initialization (arg passing).
Constify some func args
V5: Feedback based on peer review
Convert sprintf to snprintf
Convert char * to const char *
int arg converted to bool
Func changes to take a filename vs a larger struct.
Omit the space between '*' and the param name.
V4: Merged with master as of 2016/9/27 6pm
V3: Flatten the entire patchset ready for the ML
V2: Additional seperate patches based on feedback
a) configure.ac: Add a comment related to libsensors
b) HUD: Disable Block/NIC I/O stats by default.
Implement configuration option --enable-gallium-extra-hud=yes
and enable both statistics when this option is enabled.
c) Configure.ac: Minor cleanup to user visible configuration settings
d) Configure.ac: HUD stats - build system improvements
Move the -lsensors out of a deeper Makefile, bring it into the configure.ac.
Also, rename a compiler directive to more closely follow the standard.
V1: Initial release to the ML
Three new features:
1. Disk/block I/O device read/write stats MB/ps.
2. Network Interface RX/TX transfer statistics as a percentage
of the overall NIC speed.
3. lmsensor power, voltage and temperature sensors.
The lmsensor changes makes a dependency on libsensors so support
for the change is opt out by default.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Support multi-planar YUV for external EGLImage's (currently just in the
dma-buf import path) by lowering to multiple texture fetch's for each
plane and CSC in shader.
There was some discussion of alternative approaches for tracking the
additional UV or U/V planes:
https://lists.freedesktop.org/archives/mesa-dev/2016-September/127832.html
They all seemed worse than pipe_resource::next
Signed-off-by: Rob Clark <robdclark@gmail.com>
