The valve-freedreno-turnip-manual-rules naming would suggest
freedreno + turnip rules, but in fact this rule is meant to only
impact turnip.
Change the name to match .google-turnip-manual-rules and
.collabora-turnip-manual-rules.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33542>
We currently assume the implicit offset shift is always 2. However, this
shift is actually based on the type, making sure the offset fields are
in units of the type size. The full offset calculation is as follows:
((SRC2<<SRC2_SHIFT) + OFF)<<TYPE_SHIFT
Where SRC2, SRC2_SHIFT, and OFF are instruction fields while TYPE_SHIFT
is implicit and derived from the TYPE field.
This commit implements (dis)assembly support for this, adopting the
syntax used by the blob.
Signed-off-by: Job Noorman <jnoorman@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33503>
The assembly syntax of certain instructions differs significantly
between generations (e.g., ldg.a/stg.a) so it's useful to be able to
generate syntax error based on the generation we are assembling for.
Signed-off-by: Job Noorman <jnoorman@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33503>
For bin merging, we will have to first sample all bins in the pipe, then
determine which bins can be merged, then iterate over bins. Combine all
of the information required to render a bin into a tu_tile_config struct
and pass it down to tu6_emit_tile_select(). This will let us more
flexibly construct a list of bins later.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33230>
For devices that load shader consts through preamble, HLSQ_INVALIDATE_CMD
should be used to invalidate VS state before CP_DRAW_INDIRECT_MULTI. This
avoids previous consts loaded through CP_LOAD_STATE6_GEOM for non-indirect
draws to affect the consts needed for the current indirect draw.
Fixes two failing vkd3d-proton test cases on a750:
test_vertex_id_dxbc
test_vertex_id_dxil
Signed-off-by: Zan Dobersek <zdobersek@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32924>
Handle phis in two groups: first those which already have a preferred
reg set and then those without. The second group should be rare but by
handling them last, they don't accidentally occupy a preferred reg of
another phi, preventing excessive copying in some cases.
Signed-off-by: Job Noorman <jnoorman@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33489>
The fix in e7ac1094f6 to emit preamble defs in the correct block would
move the cursor of the builder that is later used to insert descriptor
prefetches, emitting them at the wrong place. Fix this by resetting the
cursor before emitting the prefetches.
Signed-off-by: Job Noorman <jnoorman@igalia.com>
Fixes: e7ac1094f6 ("ir3: rematerialize preamble defs in block dominated by sources")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33399>
The gen_header.py script is failing for older versions of python3 such
as python 3.5. Two issues observed with python 3.5 are ...
1. Python 3 versions prior to 3.6 do not support the f-string format.
2. Early python 3 versions do not support the 'required' argument for
the argparse add_subparsers().
Fix both of the above so that older versions of python 3 still work.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28780>
We don't need to run the validation of the XML files if we are just
compiling the kernel. Skip the validation unless the user enables
corresponding Kconfig option. This removes a warning from gen_header.py
about lxml being not installed.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28780>
Annotating ssa defs without affecting compilation is impossible with
debug info instructions since referencing a nir_def from the debug info
instr will add uses.
The old approach also stops worrking if passes reorder instructions.
This patch proposes a solution which should not regress performance just
like the old approach. The difference is that this one allocates a bit
more space for debug info instead of adding a new instruction for it.
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33141>
Currently the `nolrz` TU_DEBUG options are only checked during
device creation and image creation, respectively. This means that if
the options are enabled after the device/image is created, LRZ
will still be used. Similarly, if the options are disabled after the
device/image is created, LRZ will still be disabled.
This change moves the checks to the point where the LRZ is actually
used, allowing for runtime toggling of LRZ.
Signed-off-by: Mark Collins <mark@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32906>
This adds a new environment variable, TU_DEBUG_FILE, which can be used to
enable/disable various debug options at runtime via writing to a file. This
is useful for switching between different debug options (such as toggling
between SYSMEM/GMEM) without needing to restart the application.
Signed-off-by: Mark Collins <mark@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32906>
The division between color and d/s resolve groups appears to be
important. Not doing so causes corruption in some of games
when forcing gmem, e.g. in Arma, War Thunder.
Fixes: 25b73dff5a
("tu/a7xx: use concurrent resolve groups")
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33169>
a630-gl takes just over 7 minutes on 4 DUTs, so we can safely reduce
the parallelism to 3 and stay within the time limit.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33082>
The a618-gl and a618-egl jobs are covered by a630-gl, which also
does egl testing, while a630-piglit is a more comprehensive
equivalent of a618-piglit, so we can de-duplicate these jobs.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33082>
Currently there are only 8 sm8350-hdk DUTs in LAVA, but there were
10 pre-merge jobs scheduled for them.
Add a full nightly job to cover the gaps.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33082>
This trace contains generated GL IDs from the time it was recorded,
making it invalid.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Reviewed-by: Mike Blumenkrantz <None>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33256>
LLVM 15 is pretty old, and notably not supported by either ANGLE nor
Skia anymore. So let's move up to LLVM 19 using packages provided by
LLVM themselves, apart from PPC and ARMv7 which don't have builds.
The Skia build now requires a bunch of new warning exclusions; hopefully
most of these are no longer needed when we can upgrade Skia shortly.
The ci-deb-repo revision has also been bumped to get us a new version of
xtensor which builds with LLVM 19, and a version of spirv-tools which
also works with LLVM 19.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Closes: mesa/mesa#11538
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33137>
cat3 instructions read their 3rd src later than their first two srcs.
Pre-a7xx, this was only supported for mad(sh) but on a7xx, it works for
all cat3 instructions.
Signed-off-by: Job Noorman <jnoorman@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33183>
cat3 instructions read their 3rd src later than their first two srcs.
This was implemented in two different places: once for scheduling and
once for legalization. Extract this logic in a new helper and also add
similar logic for gat/swz there (which the scheduling logic failed to
account for).
Signed-off-by: Job Noorman <jnoorman@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33183>
Preamble defs were rematerialized at the end of the preamble. However,
when some of the sources were defined inside control flow, this would
lead to these sources not dominating their use. Fix this by finding the
block that is dominated by all sources and inserting the new instruction
there.
Also make sure we only de-duplicate instructions if the new instruction
is dominated by the existing one.
Fixes a NIR validation error in Devil may cry 5.
Signed-off-by: Job Noorman <jnoorman@igalia.com>
Fixes: fdfe86aa52 ("ir3: Expand preamble rematerialization")
Fixes: 6a744ddebc ("ir3: Initial support for pushing globals with ldg.k")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33270>
This was accidentally deleted when rewriting to use common Vulkan
dynamic state. This meant we wouldn't correctly fall back when someone
accidentally used FDM together with multiple viewports.
Fixes: 97da0a7734 ("tu: Rewrite to use common Vulkan dynamic state")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33241>
