If you pass a bool in as the value to set, the C standard says that it
gets converted to an int prior to shifting. If you try to set a bool to
bit 31, this lands you in undefined behavior. It's better just to add
the explicit cast and let the compiler delete it for us.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
These are broken on a future platform, but it turns out we don't need
to fix them, since they're just type-converting moves with strided
source. Kill them.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
We have to lower some shadow instructions because they don't exist in
hardware and we have to lower txb+offset+clamp because the message gets
too big and we run into the sampler message length limit of 11 regs.
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
v2: Split changes to the message type field to another patch. Suggested
by Caio.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
There are a number of opcode_desc table entries for many of these
unused opcodes. A symbolic opcode enum will be required in a future
commit in order to keep them in the opcode description tables. The
alternative would be to remove the unused opcodes from the opcode
description tables.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Allows to specify a bitfield based on its upper and lower bounds
instead of a symbolic field definition, kind of what the current
GET_BITS macro is to GET_FIELD.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Adds suppport for ARB_fragment_shader_interlock. We achieve
the interlock and fragment ordering by issuing a memory fence
via sendc.
Signed-off-by: Plamena Manolova <plamena.manolova@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
The only reason it was it's own opcode was so that we could detect it
and adjust the source register based on the payload setup. Now that
we're using the ATTR file for FS inputs, there's no point in having a
magic opcode for this.
v2 (Jason Ekstrand):
- Break the bit which removes the CINTERP opcode into its own patch
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
NIR has code to lower these away for us but we can do significantly
better in many cases with register regioning and SIMD4x2.
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
v2: Fix alignment style (Topi Pohjolainen)
(Jason Ekstrand)
- Enable bit_size parameter to scattered messages to enable different
bitsizes byte/word/dword.
- Remove use of brw_send_indirect_scattered_message in favor of
brw_send_indirect_surface_message.
- Move scattered messages to surface messages namespace.
- Assert align1 for scattered messages and assume Gen8+.
- Inline brw_set_dp_byte_scattered_read.
v3: (Jason Ekstrand)
- Use renamed brw_byte_scattered_data_element_from_bit_size method
- Assert scattered read for Gen8+ and Haswell.
- Use conditional expresion at components_read.
- Include comment about params for scattered opcodes.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v2: (Jason Ekstrand)
- Enable bit_size parameter to scattered messages to enable different
bitsizes byte/word/dword.
- Remove use of brw_send_indirect_scattered_message in favor of
brw_send_indirect_surface_message.
- Move scattered messages to surface messages namespace.
- Assert align1 for scattered messages and assume Gen8+.
- Inline brw_set_dp_byte_scattered_write.
v3: - Remove leftover newline (Topi Pohjolainen)
- Rename brw_data_size to brw_scattered_data_element and use
defines instead of an enum (Jason Ekstrand)
- Assert scattered write for Gen8+ and Haswell (Jason Ekstrand)
Signed-off-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Although from SPIR-V point of view, rounding modes are attached to the
operation/destination, on i965 it is a status, so we don't need to
explicitly set the rounding mode if the one we want is already set.
Taking into account that the default mode is RTE, one possible
optimization would be optimize out the first RTE set for each
block. For in order to work, we would need to take into account block
interrelationships. At this point, it is not worth to complicate the
optimization for such small gain.
v2: Use a single SHADER_OPCODE_RND_MODE opcode taking an immediate
with the rounding mode (Curro)
v3: Reset optimization for every block. (Jason Ekstrand)
Signed-off-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Although it is possible to emit them directly as AND/OR on brw_fs_nir,
having a specific opcode makes it easier to remove duplicate settings
later.
v2: (Curro)
- Set thread control to 'switch' when using the control register
- Use a single SHADER_OPCODE_RND_MODE opcode taking an immediate
with the rounding mode.
- Avoid magic numbers setting rounding mode field at control register.
v3: (Curro)
- Remove redundant and add missing whitespace lines.
- Match printing instruction to IR opcode "rnd_mode"
v4: (Topi Pohjolainen)
- Fix code style.
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Signed-off-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The hardware encodings often mean different things depending on whether
the source is an immediate.
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
These enums live inside struct brw_wm_prog_data, so it makes sense to
keep them in the same header. It also allows to use them without
including brw_eu_defines.h.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This way we can set the destination type as double to all these new opcodes,
avoiding any optimizer's confusion that was happening before.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
[ Francisco Jerez: Drop no_spill workaround originally needed due to
the bogus destination type of VEC4_OPCODE_FROM_DOUBLE. ]
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
compiler/brw_vec4_gs_visitor.cpp:744:39: error:
‘GEN7_MAX_GS_OUTPUT_VERTEX_SIZE_BYTES’ was not declared in this scope
output_vertex_size_bytes <= GEN7_MAX_GS_OUTPUT_VERTEX_SIZE_BYTES);
Fixes: d0d4a5f43b ("i965: split EU defines to brw_eu_defines.h")
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Mostly a dummy git mv with a couple of noticable parts:
- With the earlier header cleanups, nothing in src/intel depends
files from src/mesa/drivers/dri/i965/
- Both Autoconf and Android builds are addressed. Thanks to Mauro and
Tapani for the fixups in the latter
- brw_util.[ch] is not really compiler specific, so it's moved to i965.
v2:
- move brw_eu_defines.h instead of brw_defines.h
- remove no-longer applicable includes
- add missing vulkan/ prefix in the Android build (thanks Tapani)
v3:
- don't list brw_defines.h in src/intel/Makefile.sources (Jason)
- rebase on top of the oa patches
[Emil Velikov: commit message, various small fixes througout]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
2017-03-13 11:16:34 +00:00
Renamed from src/mesa/drivers/dri/i965/brw_eu_defines.h (Browse further)
