These are all reuseable by radv.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
These are all shareable with radv, so start migrating them to the
common code.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Otherwise we were writing these as 4 components, and things went bad.
Fixes (the remaining):
dEQP-VK.clipping.user_defined.*.vert_geom.*
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes clip distance fetches as they are single item loads
with a const_index like float[1].
Fixes:
dEQP-VK.clipping.user_defined.*.vert_geom.[0-6]
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This code should be used in radv, so move it to a shared location
in advance of doing that.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
No f16 support as I'm not quite sure about alignment yet.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Fixes:
dEQP-VK.geometry.layered.1d_array.fragment_layer
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This handles geometry shader inputs written by the vertex (es) shader
to the esgs ring.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just adds the API and fixes up the callers.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This handles emitting things to the gsvs ring, and sending the
correct GS msgs.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This create the gs copy shader and compiles it.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just places the flag into the shader info so we can use it from
the driver after we create the shader.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This sets up the rings and adds the variables
needed to make them work.
v2: rework for sharing ring and scratch
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just adds some defines needed for geom shaders.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes a bunch of buffer related:
dEQP-VK.memory.pipeline_barrier.*
tests, that were crashing in LLVM due to this being missing.
Reviewed-by: Andres Rodriguez<andresx7@gmail.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes:
dEQP-VK.spirv_assembly.instruction.compute.opsrem.*
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org"
Signed-off-by: Dave Airlie <airlied@redhat.com>
We weren't adding the fragment position properly.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Since LLVM revision 293359 DumpModule gets only implemented when
either a debug build or LLVM_ENABLE_DUMP is set.
This patch adds a direct replacement for the function for radv and
radeonsi, However, as I don't know a good place to put common LLVM
code for all three I inlined the implementation for LLVMPipe.
v2: Use the new code for LLVM 3.4+ instead of LLVM 5+ & fixed indentation
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Apparently the source is not an address but an offset, so we actually
need to use the base.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
CC: <mesa-stable@lists.freedesktop.org>
This is needed to have common code for gs copy shader emission.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
makes it easier to add other shader stages.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just adds the infrastructure to allow writing layer
and viewport index. It's just a first patch out of the geom
shader tree, and doesn't do much on its own.
v2: add missing if statement change (Bas)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Otherwise we read past the end of the buffer.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Just noticed this while in the area.
v2: one replacement was incorrect.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
... and eliminate emit_fdiv and nir_to_llvm_context::fpmath_md_*, which
are now unused.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
... and eliminate the non-ac copies. Mostly straight-forward
search & replace.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
... by straight-forward search & replace, and eliminate
emit_llvm_intrinsic.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Code is taken from a combination of radv (for the more basic functions,
to avoid gallivm dependencies) and radeonsi (for the new and improved
derivative calculations).
v2: add 0.5 offset to tex coords only after derivative calculation
v3:
- really only touch the first three coordinates
- rebase on the removal of the 1.5 --> 0.5 offset change
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> (v2)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
b838f642 "ac/debug: Move sid_tables.h generation to common code." moved
sid_tables.h but forgot the corresponding .gitignore.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This just adds the nir->llvm support, enabling
the extension causes some failures on llvm 3.9 at least,
but this code seems fine.
NIR passes the sampler in src[1].x, and we LLVM/SI requires
it as the last parameters in the coords (coord[2] for 2D,
coord[3] for 2DArray).
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is for handling chained command buffers and secondary command
buffers. It doesn't handle the trace id for secondary command buffers
yet, but I don't think that is possible in general with just writes,
as we could call a secondary command buffer multiple times.
I think this is good enough for now, as the most useful case is the
chaining when we grow an IB.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This was seen in doom shaders, so handle it properly.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave AIrlie <airlied@redhat.com>
