Current code is returning an INVALID_OPERATION when trying to use
getTextureImage() on a level that has not been explicitly defined.
That is, we define a mipmapped Texture2D with 3 levels, and try to use
GetTextureImage() for the 4th levels, and INVALID_OPERATION is returned.
Nevertheless, such case is not listed as an error in OpenGL 4.6 spec,
section 8.11.4 ("Texture Image Queries"), where all the case errors for
this function are defined. So it seems this is a valid operation.
On the other hand, in section 8.22 ("Texture State and Proxy State") it
states:
"Each initial texture image is null. It has zero width, height, and
depth, internal format RGBA, or R8 for buffer textures, component
sizes set to zero and component types set to NONE, the compressed
flag set to FALSE, a zero compressed size, and the bound buffer
object name is zero."
We can assume that we are reading this initialized empty image when
calling GetTextureImage() with a non defined level.
With this assumption, we will reach one of the other error cases defined
for the functions. In the end this means that we would end up returning
INVALID_VALUE to the caller.
This fixes arb_get_texture_sub_image piglit tests.
v2: just return INVALID_VALUE if there is no defined level (Iago)
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
According to OpenGL 4.6 spec, section 8.11.4 ("Texture Image Queries"),
relative to errors for GetTexImage, GetTextureImage, and GetnTexImage:
"An INVALID_OPERATION error is generated by GetTextureImage if the
effective target is TEXTURE_CUBE_MAP or TEXTURE_CUBE_MAP_ARRAY, and
the texture object is not cube complete or cube array complete,
respectively."
This fixes arb_get_texture_sub_image piglit tests.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
According to OpenGL 4.6 spec, section 8.11.4 ("Texture Image Queries"),
relative to errors for GetTextureSubImage() function:
"An INVALID_VALUE error is generated if the effective target is
TEXTURE_1D and either yoffset is not zero, or height is not one.
An INVALID_VALUE error is generated if the effective target is
TEXTURE_1D, TEXTURE_1D_ARRAY, TEXTURE_2D or TEXTURE_RECTANGLE, and
either zoffset is not zero, or depth is not one."
The commit fixes the check for height and depth.
This fixes arb_get_texture_sub_image piglit tests.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
- remove mtypes.h from most header files
- add main/menums.h for often used definitions
- remove main/core.h
v2: fix radv build
Reviewed-by: Brian Paul <brianp@vmware.com>
Pretty straight forward, just pass the divisors through the shader
key and then do a LLVM divide.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
For dcn1 && < 64 bpp displayable surfaces, addrlib only accepts
S swizzles.
At the same time addrlib prefers D swizzles is allowed, so we can
just allow S swizzles as fallback.
Fixes: b64b712558 "ac/surface/gfx9: request desired micro tile mode explicitly"
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This is the ABI I'm hoping to stabilize for merging the driver. seqnos
are eliminated, which allows for the GPU scheduler to task-switch between
DRM fds even after submission to the kernel. In/out sync objects are
introduced, to allow the Android fencing extension (not yet implemented,
but should be trivial), and to also allow the driver to tell the kernel to
not start a bin until a previous render is complete.
This should avoid mistakes with not flushing as we change the series of
loads. Already, it fixes a hopefully unreachable case where we were
emitting just the TILE_COORDINATES and not the dummy store that needs to
go with it.
This was dying in the simulator on
GTF-GLES3.gtf.GL3Tests.packed_depth_stencil.packed_depth_stencil_blit.
We'll need to do basically the same thing as Z32F/S8 does in the MSAA
Z24S8 case.
The v3dX(get_internal_type_bpp_for_output_format)() call only handles
color output formats (which overlap in enum numbers with depth output
formats), so for depth we just need to take the normal cpp times the
number of samples.
The current FW has restricted the size to the worse case,
and the new dynamic dpb buffer support is on the way from
firmware side, we will change accordingly.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
num_dcc_levels means that DCC is supported, but this doesn't
mean that it's enabled by the driver. Instead, we should rely
on radv_image_has_dcc().
This fixes some multisample regressions since 0babc8e5d6
("radv: fix picking the method for resolve subpass") on Vega.
This is because the resolve method changed from HW to FS, but
those fails are totally unexpected, so there might some
differences between Polaris and Vega here.
Fixes: 44fcf58744 ("radv: Disable DCC for GENERAL layout and compute transfer dest.")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This helper shares common code before resolving using either
a fragment or a compute shader.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The compatibility and core tokens were not added until GLSL 1.50,
for GLSL 1.40 just assume all shaders built with a compat profile
are compat shaders.
Fixes rendering issues in Dawn of War II on radeonsi which has
enabled OpenGL 3.1 compat support.
Fixes: a0c8b49284 "mesa: enable OpenGL 3.1 with ARB_compatibility"
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105807
Passing ctx to compressedteximage_only_format was the only use of the
ctx parameter in _mesa_format_no_online_compression, so that parameter
had to go too.
../../SOURCE/master/src/mesa/main/teximage.c: In function ‘compressedteximage_only_format’:
../../SOURCE/master/src/mesa/main/teximage.c:1355:57: warning: unused parameter ‘ctx’ [-Wunused-parameter]
compressedteximage_only_format(const struct gl_context *ctx, GLenum format)
^~~
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
vulkan/genX_blorp_exec.c:69:1: warning: ‘blorp_get_surface_base_address’ defined but not used [-Wunused-function]
blorp_get_surface_base_address(struct blorp_batch *batch)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from vulkan/genX_blorp_exec.c:35:0:
./blorp/blorp_genX_exec.h:1249:1: warning: ‘blorp_emit_memcpy’ defined but not used [-Wunused-function]
blorp_emit_memcpy(struct blorp_batch *batch,
^~~~~~~~~~~~~~~~~
genX_blorp_exec.c:99:1: warning: ‘blorp_get_surface_base_address’ defined but not used [-Wunused-function]
blorp_get_surface_base_address(struct blorp_batch *batch)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from genX_blorp_exec.c:33:0:
../../../../../src/intel/blorp/blorp_genX_exec.h:1249:1: warning: ‘blorp_emit_memcpy’ defined but not used [-Wunused-function]
blorp_emit_memcpy(struct blorp_batch *batch,
^~~~~~~~~~~~~~~~~
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
