Covers the case where the `dri2_init_screen` calls
`pipe_loader_create_screen_vk` directly and not sets
the device major and minor.
Signed-off-by: Igor Torrente <igor.torrente@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24678>
The nir_op_is_vec() helper I added in 842338e2f0 ("nir: Add a
nir_op_is_vec helper") treats nir_op_mov as a vec even though the
semanitcs of the two are different. In retrospect, this was a mistake
as the previous three fixup commits show. This commit splits the helper
into two: nir_op_is_vec() and nir_op_is_vec_or_mov() and uses the
appropriate helper at each call site. Hopefully, this rename will
encurage any future users of these helpers to think about nir_op_mov as
separate from nir_op_vecN and we can avoid these bugs.
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24704>
We already renamed the type, we just need to rename the enum and the
casting helper functions.
Generated with sed:
sed -i -e 's/nir_instr_type_ssa_undef/nir_instr_type_undef/g' src/**/*.h src/**/*.c src/**/*.cpp
sed -i -e 's/nir_instr_as_ssa_undef/nir_instr_as_undef/g' src/**/*.h src/**/*.c src/**/*.cpp
and two tiny whitespace fixups in lima.
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24703>
VK_FORMAT_G8B8G8R8_422_UNORM and VK_FORMAT_B8G8R8G8_422_UNORM already
place the luminance channel in the green component which is where we NIR
lowering code for ycbcr expects it. Set an RGBA swizzle in the common
format table and make it the driver's responsibility to re-map the
formats as needed for their hardware.
The only Vulkan drivers affected by this change are the Intel drivers
and lavapipe. None of NVK, RADV, and v3dv support these formats yet and
Turnip has its own lowering that doesn't rely on the YCbCr format table
in util/vk_format.c.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24619>
Without loop exit phis, the code emitted by nir_lower_non_uniform_access
won't be lowered to registers. Therefore, all lanes will have the value
of the last iteration.
Fixes the remaining descriptor indexing fails:
dEQP-VK.descriptor_indexing.storage_texel_buffer
dEQP-VK.descriptor_indexing.storage_texel_buffer_after_bind
dEQP-VK.descriptor_indexing.storage_texel_buffer_after_bind_in_loop
dEQP-VK.descriptor_indexing.storage_texel_buffer_after_bind_in_loop_lifetime
dEQP-VK.descriptor_indexing.storage_texel_buffer_after_bind_lifetime
dEQP-VK.descriptor_indexing.storage_texel_buffer_in_loop
dEQP-VK.descriptor_indexing.storage_texel_buffer_in_loop_lifetime
dEQP-VK.descriptor_indexing.storage_texel_buffer_lifetime
dEQP-VK.descriptor_indexing.storage_texel_buffer_minNonUniform
cc: mesa-stable
Reviewed-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24661>
Instead, we replace every use of it with nir_def. Most of this commit
was generated by sed:
sed -i -e 's/dest.ssa/def/g' src/**/*.h src/**/*.c src/**/*.cpp
A few manual fixups were required in lima and the nir_legacy code.
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24674>
Instead, we replace it directly with nir_def. We could replace it with
nir_dest but the next commit gets rid of that so this avoids unnecessary
churn. Most of this commit was generated by sed:
sed -i -e 's/dest.dest.ssa/def/g' src/**/*.h src/**/*.c src/**/*.cpp
There were a few manual fixups required in the nir_legacy.c and
nir_from_ssa.c as nir_legacy_reg and nir_parallel_copy_entry both have a
similar pattern.
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24674>
We could add a nir_def_num_components() helper but we use
ssa.num_components about 3x as often as nir_dest_num_components() today
so that's a major Coccinelle refactor anyway and this doesn't make it
much worse. Most of this commit was generated byt the following
semantic patch:
@@
expression D;
@@
<...
-nir_dest_num_components(D)
+D.ssa.num_components
...
Some manual fixup was needed, especially in cpp files where Coccinelle
tends to give up the moment it sees any interesting C++.
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24674>
We could add a nir_def_bit_size() helper but we use ->bit_size about 3x
as often as nir_dest_bit_size() today so that's a major Coccinelle
refactor anyway and this doesn't make it much worse. Most of this
commit was generated byt the following semantic patch:
@@
expression D;
@@
<...
-nir_dest_bit_size(D)
+D.ssa.bit_size
...
Some manual fixup was needed, especially in cpp files where Coccinelle
tends to give up the moment it sees any interesting C++.
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24674>
Shaders used in set_buffer_layer will apply colorspace conversion,
so we need to set correct matrix depending on the input and output
surface formats.
Use BT.601 (default) for YUV to RGB and identity for RGB to RGB.
Reviewed-by: Leo Liu <leo.liu@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24626>
This patch removes start_slot from set_vertex_buffers() as suggested in
https://gitlab.freedesktop.org/mesa/mesa/-/issues/8142
compilation testing:
all gallium drivers, nine frontend compilation has been tested.
d3d10umd compilation has not been tested
driver, frontend testing:
only llvmpipe and radeonsi driver was tested running game
only the nine frontend changes are complex. All other changes are easy.
nine front end was using start slot and also using multi context.
nine frontend code changes:
In update_vertex_elements() and update_vertex_buffers(), the vertex
buffers or streams are ordered removing the holes. In update_vertex_elements()
the vertex_buffer_index is updated for pipe driver to match the ordered list.
v2: remove start_slot usage code from Marek (Marek Olšák)
v3: nine stream number holes mask code from Axel (Axel Davy)
Reviewed-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com> (except nine, which is Ab)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22436>
amdgpu_bo_destroy is called when the bo ref count reaches 0. But if the
bo is on bo_export_table, amdgpu_bo_from_handle can race with
amdgpu_bo_destroy and increments the bo ref count. When that happens,
amdgpu_bo_destroy should bail.
v2:
- reorder amdgpu_bo_free and amdgpu_bo_unmap
- fix an assert
Reviewed-by: Marek Olšák <marek.olsak@amd.com> (v1)
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24526>
Because these files indeed doesn't belongs to src/util, they are tightly coupled with
src/gallium/auxiliary
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19522>
As u_pack_color.h is used in vulkan drivers, so decouple it from gallium by this move
And dbghelp.h is included in u_debug_symbol.c and that's resident in src/util/
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19522>
pipe_swizzle is used by src/util/*, so do the move to decouple src/util/* from gallium
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19522>
sed + ninja clang-format + fix up spacing for common code.
If you are unhappy that I did not manually change the whitespace of your driver,
you need to enable clang-format for it so the formatting would happen
automatically.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Acked-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24428>
