It can be further optimized in the future, but
the new sequence already has a few advantages:
* Uses fewer instructions
* Uses even fewer instructions in wave32 mode
* Doesn't use the VALU at all
Totals from affected shaders (GFX10):
VGPRS: 43504 -> 43496 (-0.02 %)
Code Size: 2436000 -> 2423688 (-0.51 %) bytes
Max Waves: 8704 -> 8705 (0.01 %)
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4165>
When TCS has an equal number of input and output, it means that the
number of VS and TCS invocations (LS and HS) are the same; and that
the HS invocations operate on the same vertices as the LS.
When this is the case, this commit removes the else-if between
the merged VS and TCS halves, making it possible to schedule
and optimize the code accross the two halves.
Totals:
SGPRS: 5577367 -> 5581735 (0.08 %)
VGPRS: 3958592 -> 3960752 (0.05 %)
Code Size: 254867144 -> 254838244 (-0.01 %) bytes
Max Waves: 1053887 -> 1053747 (-0.01 %)
Totals from affected shaders:
SGPRS: 29032 -> 33400 (15.05 %)
VGPRS: 35664 -> 37824 (6.06 %)
Code Size: 1979028 -> 1950128 (-1.46 %) bytes
Max Waves: 7310 -> 7170 (-1.92 %)
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4165>
Previously the tess factors were loaded individually, but now they can
be loaded using a single LDS load instruction.
Note that the inner and outer tess factors are not yet combined.
Totals (GFX10):
Code Size: 254896008 -> 254879212 (-0.01 %) bytes
Totals from affected shaders (GFX10):
Code Size: 2028352 -> 2011556 (-0.83 %) bytes
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4165>
Some copypasta may have stuck in the code.
This was left on false by mistake.
Totals (GFX10):
Code Size: 254939248 -> 254896008 (-0.02 %) bytes
Totals from affected shaders (GFX10):
VGPRS: 16196 -> 16212 (0.10 %)
Code Size: 1126332 -> 1083092 (-3.84 %) bytes
Max Waves: 2336 -> 2334 (-0.09 %)
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4165>
There is no need to check whether they are written using indirect
indices, because all tess factors should be written to VMEM only
at the end of the shader.
No pipeline db changes.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4165>
This allows the passes after isel to assume that the exports are
always correct, and also allows to schedule these null exports later.
Additionally, it ensures that the correct exec mask is used for
these exports.
Totals from affected shaders (GFX10):
SGPRS: 84224 -> 84344 (0.14 %)
VGPRS: 23088 -> 23076 (-0.05 %)
Code Size: 882892 -> 894368 (1.30 %) bytes
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4165>
Let's make it clear what includes are being added everywhere, so that
they can be cleaned up.
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4360>
64-bit VGPR constant copies can happen because of 64-bit constant copy
propagation. Since this optimization is beneficial and more annoying to
deal with in the optimizer, I've implemented 64-bit VGPR constant copies
in handle_operands().
This also sets copy_operation::size correctly for 64-bit constant copies.
Cc: 20.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4260>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4260>
The old code would have previously caught:
loop {
...
break
}
when it was meant to just catch:
loop {
if (...)
break
else
break
}
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3658>
NIR removes most of this but undef instructions for loop header phis can
remain. These were harmless because ACO would DCE them itself.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3658>
Usually a loop ends with a uniform continue. If it doesn't and we end up
adding our own continue edges (because of continue_or_break or divergent
breaks at the end), we have to add extra operands to the loop header phis.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3658>
Apparently needed for Stoney Ridge, Kabini and Mullins APUs.
gfx702 also has 16-bank LDS and https://llvm.org/docs/AMDGPUUsage.html
lists some dGPUs under there. Those GPUs seem to be Hawaii actually
(gfx701) and we don't seem to have gotten any interpolation related bugs
reported with them so far.
The late kill flag was tested by running pipeline-db with
ACO_DEBUG=validatera while setting late kill for SMEM buffer loads,
emit_vop2_instruction() and texture instructions. I also tested with
just setting the flag for v_interp_p1_f32.
As far as I know, the only other thing we have to consider for 16-bank LDS
is something to do with 16-bit interpolation. We don't do that yet.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3914>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3914>
Note that tess factors are always read at the end of the shader,
so those are still always saved to LDS.
Totals from affected shaders:
VGPRS: 25244 -> 25164 (-0.32 %)
Code Size: 1768268 -> 1690804 (-4.38 %) bytes
Max Waves: 4947 -> 4953 (0.12 %)
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
This optimizes out several superfluous stores of the tess factors,
especially if the shader wrote those outputs multiple times.
Pipeline DB changes on GFX10:
Totals from affected shaders:
SGPRS: 30384 -> 29536 (-2.79 %)
Code Size: 2260720 -> 2214484 (-2.05 %) bytes
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
In some cases (eg. in a few tessellation CTS tests) the VS part of
a merged HS is completely empty. Let's not generate a divergent if
in these cases. (LLVM also doesn't do it.)
No pipeline DB changes, only affects the CTS.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Vega 10 and Raven have a HW bug: when the HS thread count is zero,
the LS input arguments are loaded in the wrong registers. This commit
works around this by using the registers where the data actually is,
for the affected arguments.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
When tessellation is used, the VS runs on the HW LS stage (merged
into HS on GFX9-10). This commit enables such VS to store its
outputs properly in LDS so that the TCS can load them as its
per-vertex inputs.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Tessellation control shaders can have per-vertex inputs,
and both per-vertex and per-patch outputs. TCS can not only store,
but also load their outputs.
The TCS outputs are stored in RING_HS_TESS_OFFCHIP in VMEM, which
is where the TES reads them from. Additionally, the are also stored
in LDS to make sure they can be loaded fast when read by the TCS.
Tessellation factors are always just stored in LDS.
At the end of the shader, the first shader invocation reads these
from LDS and writes them to RING_HS_TESS_FACTOR in VMEM, and
additionally to RING_HS_TESS_OFFCHIP when they are read by
the Tessellation Evaluation Shader.
This implementation matches the memory layouts used by radv_nir_to_llvm.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Previously, it was calculated incorrectly for 64-bit writes and reads.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
This commit fixes lds_store and lds_load so that they can
properly support 32 and 64-bit loads and stores; and makes
them a little more reusable so they can be used by
tessellation control shaders.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
This commit takes the new helpers into use by the VS output
store function. This function is also where the VS outputs will
be handled when the VS runs on the HW LS stage.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
This commit carves out the GS per-vertex input load, and takes the
new helper functions into use.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
These helpers are going to make it unnecessary to reimplement the
(almost) same address offset calculation in mulitple places.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
These are going to be used for loading and storing inputs
and outputs in various stages, such as GS, TCS and TES.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
