Some drivers need to know which streams are used by a geometry
shader. Adding a mask of active streams makes the use of
UsesStreams superfluous as it's the equivalent of:
ActiveStreamMask != (1 << 0)
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5984>
These should be more accurate than the current cycle counts, since
among other things they consider the effect of post-scheduling passes
like the software scoreboard on TGL. In addition it will enable us to
clean up some of the now redundant cycle-count estimation
functionality in the instruction scheduler.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Change brw_compute_vue_map() to also take the number of pos slots. If
more than one slot is used, the VARYING_SLOT_POS is treated as an
array.
When using Primitive Replication, instead of a single position, the
VUE must contain an array of positions. Padding might be
necessary (after clip distance) to ensure rest of attributes start
aligned.
v2: Add note about array in the commit message and assert that
pos_slots >= 1 to make clear 0 is invalid. (Jason)
Move padding to be after the clip distance.
v3: Apply the correct offset when gathering the sources from outputs.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> [v2]
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2313>
Passing shader_stats to the fs_generator constructor means that the
SIMD8 shader stats from the visitor (such as the scheduler mode) will be
reported out for the SIMD16/SIMD32 versions as well.
As you can see, we are now passing 'shader_stats' and 'stats' to
generate_code(), which is obviously odd looking. Ian rebased and
committed an old patch of mine which added the shader_stats struct on
July 30 in commit dabb5d4bee (i965/fs: Add a shader_stats struct.) and
shortly after on August 12 Jason added the brw_compile_stats struct in
commit 134607760a (intel/compiler: Fill a compiler statistics struct).
I'd like to combine the two, but I'm not sure how. shader_stats is an
input to generate_code() while brw_compile_stats is an output and is
only used by the Vulkan driver. Leave it as is for now...
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4093>
This commit is all annoying plumbing work which just adds support for a
new brw_compile_stats struct. This struct provides a binary driver
readable form of the same statistics we dump out to stderr when we
INTEL_DEBUG is set with a shader stage.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
It'll grow further, and we'd like to avoid adding an additional
parameter to fs_generator() for each new piece of data.
v2 (idr): Rebase on 17 months. Track a visitor instead of a cfg.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The rules for gl_SubgroupSize in Vulkan require that it be a constant
that can be queried through the API. However, all GL requires is that
it's a uniform. Instead of always claiming that the subgroup size in
the shader is 32 in GL like we have to do for Vulkan, claim 8 for
geometry stages, the maximum for fragment shaders, and the actual size
for compute.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Right now, all keys have two things in common: a program string ID and a
sampler_prog_key_data. I'd like to add another thing or two and need a
place to put it. This commit adds a new brw_base_prog_key struct which
contains those two common bits.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Now that NIR_TEST_* doesn't swap the shader out from under us, it's
sufficient to just modify the shader rather than having to return in
case we're testing serialization or cloning.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
libintel_common depends on libintel_compiler, but it contains debug
functionality that is needed by libintel_compiler. Break the circular
dependency by moving gen_debug files to libintel_dev.
Suggested-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Vulkan and Gallium don't use Mesa's gl_program data structure, so they
can't poke at 'prog'. But we can simply use the copy of the shader info
stored with the NIR shader, which is guaranteed to exist.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
This moves nir_shader_clone() to the driver-specific compile function,
rather than the shared src/intel/compiler code. This allows i965 to do
key-specific passes before calling brw_compile_*. Vulkan should not
need this cloning as it doesn't compile multiple variants.
We do need to continue cloning in the compute shader code because we
lower various things in NIR based on the SIMD width.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
These days, we're just passing a pointer to a prog_data field, which
we already have access to. We can just use it directly.
(In the past, it was a pointer to a separate value.)
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
The caller can now use brw_stage_prog_data::program_size which is set
by the brw_compile_* functions.
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This will be used by the on disk shader cache.
v2:
* Set in brw_compile_* rather than brw_codegen_*. (Jason)
Signed-off-by: Timothy Arceri <timothy.arceri@collabora.com>
[jordan.l.justen@intel.com: Only add to brw_stage_prog_data]
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This moves us away to the array of pointers model and onto a model where
each param is represented by a generic uint32_t handle. We reserve 2^16
of these handles for builtins that get generated by somewhere inside the
compiler and have well-defined meanings. Generic params have handles
whose meanings are defined by the driver.
The primary downside to this new approach is that it moves a little bit
of the work that we would normally do at compile time to draw time. On
my laptop this hurts OglBatch6 by no more than 1% and doesn't seem to
have any measurable affect on OglBatch7. So, while this may come back
to bite us, it doesn't look too bad.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
If dual object compile fails (as seems to happen with virgl a
fair bit, and does piglit even have any tests for it?), we end up
not restarting the pull params, so we call
vec4_visitor::move_uniform_array_access_to_pull_constant
a second time and it runs over the ends of the alloc.
Fixes: tests/spec/glsl-1.50/execution/geometry/max-input-components.shader_test
running inside virgl on ivybridge.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
v1: By Ben Widawsky <benjamin.widawsky@intel.com>
v2: v1 had an assert only for VS. Add the restriction for GS, HS and
DS as well and make sure the allocated sizes are not multiple of 3.
v3: Move the entry_size checks in to compiler code (Ken)
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We are going to add a packing feature to reduce the usage of the push
constant buffer. One of the consequences is that 'nr_params' would be
modified by vec4_visitor's run call, so we need to restore it if one of
them failed before executing the fallback ones. Same thing happens to the
uniforms values that would be reordered afterwards.
Fixes GL45-CTS.arrays_of_arrays_gl.InteractionFunctionCalls2 when
the dvec4 alignment and packing patch is applied.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Acked-by: Francisco Jerez <currojerez@riseup.net>
The only thing still using it is INVOCATION_ID for geometry shaders.
That's easily enough inlined into the nir_intrinsic_load_invocation_id
handling code.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We're already doing this in the FS back-end. This just does the same
thing in the vec4 back-end.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Commit e1af20f18a changed the shader_info
from being embedded into being just a pointer. The idea was that
sharing the shader_info between NIR and GLSL would be easier if it were
a pointer pointing to the same shader_info struct. This, however, has
caused a few problems:
1) There are many things which generate NIR without GLSL. This means
we have to support both NIR shaders which come from GLSL and ones
that don't and need to have an info elsewhere.
2) The solution to (1) raises all sorts of ownership issues which have
to be resolved with ralloc_parent checks.
3) Ever since 00620782c9, we've been
using nir_gather_info to fill out the final shader_info. Thanks to
cloning and the above ownership issues, the nir_shader::info may not
point back to the gl_shader anymore and so we have to do a copy of
the shader_info from NIR back to GLSL anyway.
All of these issues go away if we just embed the shader_info in the
nir_shader. There's a little downside of having to copy it back after
calling nir_gather_info but, as explained above, we have to do that
anyway.
Acked-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Mostly a dummy git mv with a couple of noticable parts:
- With the earlier header cleanups, nothing in src/intel depends
files from src/mesa/drivers/dri/i965/
- Both Autoconf and Android builds are addressed. Thanks to Mauro and
Tapani for the fixups in the latter
- brw_util.[ch] is not really compiler specific, so it's moved to i965.
v2:
- move brw_eu_defines.h instead of brw_defines.h
- remove no-longer applicable includes
- add missing vulkan/ prefix in the Android build (thanks Tapani)
v3:
- don't list brw_defines.h in src/intel/Makefile.sources (Jason)
- rebase on top of the oa patches
[Emil Velikov: commit message, various small fixes througout]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
2017-03-13 11:16:34 +00:00
Renamed from src/mesa/drivers/dri/i965/brw_vec4_gs_visitor.cpp (Browse further)
