DOOM Eternal happily creates a swapchain with 2 images for IMMEDIATE.
This fixes a 10% performance issue with RADV.
Cc: 20.1 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5704>
When set, EXPAND_LINE_WIDTH expands the line width by 1/cos(a),
where a is the minimum angle from horizontal or vertical. This
seems required by OpenGL line rasterization but not by Vulkan.
Similar to what AMDVLK and AMDGPU-PRO do for AA wide lines.
This fixes
dEQP-VK.rasterization.interpolation_multisample_*_bit.*lines_wide.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5698>
The maximum value for both points and lines is 65536. This doesn't
fix anything known (just found this while looking in that area).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5696>
SPI_SHADER_COL_FORMAT allocates export memory and CB_SHADER_MASK
map them to higher MRTs if necessary. The hardware allows to remap
MRTs to avoid holes somehow.
For example, if we have a scenario where MRT0 is unused and only
MRT1 and MRT2 are used, SPI_SHADER_COL_FORMAT is 0x77 and
CB_SHADER_MASK/CB_TARGET_MASK are 0x770 (this assumes
SPI_SHADER_UINT16_ABGR is set).
This allows us to remove one workaround that was added for fixing
GPU hangs with DXVK. I think this is because SPI_SHADER_COL_FORMAT
expects contiguous MRTs to be allocated.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5434>
When colorWriteMask is 0 we can assume that this color attachment
is unused.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5434>
GFX6 doesn't support v_floor_f64 and the precision of v_fract_f64
which is used to implement 64-bit floor is less than what Vulkan
requires.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5609>
The hardware precision of v_rcp_f64, v_sqrt_f64 and v_rsq_f64
is less than what Vulkan requires.
This lowers using the Goldschmidt's algorithm to improve precision.
Fixes dEQP-VK.glsl.builtin.precision_double.* on both compiler
backends.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5609>
If the only two registers available are consecutive and used by killed
operands, both of them will be blocked and fail the edge check.
Totals from 903 (0.66% of 135946) affected shaders:
VGPRs: 30892 -> 30884 (-0.03%)
CodeSize: 1584468 -> 1584044 (-0.03%); split: -0.05%, +0.02%
MaxWaves: 14374 -> 14378 (+0.03%)
Instrs: 306482 -> 306399 (-0.03%); split: -0.06%, +0.03%
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5626>
cs_finalize() now returns a Vulkan error code and VK_SUCCESS is 0.
Fixes: 64a92ef7a2 ("radv/winsys: Distinguish device/host memory errors.")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5629>
Otherwise if realloc fails we silently try to use it. Make recording fail instead.
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5578>
The ISA docs don't seem to say if this is allowed, so just assume short
loads require short alignment.
In practice, the only situation this should affect are byte-aligned u8vec2
loads.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5207>
The ISA docs don't seem to say if this is allowed, so just assume short
stores require short alignment.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5207>
We write to these variables using image intrinsics.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5207>
Checking errno is actually wrong because it's only updated if
popen() fails (ie. NULL). One solution is to check if the first
line is empty.
Fixes: c95d258d1b ("aco: fix printing ASM on GFX6-7 if clrxdisasm is not found")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5591>
This allows literals for the lane select on GFX10+. The doc says
that is should be a SGPR or a constant but VOP3 on GFX10+ allows
literals.
Some later validation code checks if literals are allowed anyways.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5010>
Fixes some dEQP-VK.pipeline.executable_properties.* which expect
a valid string to be returned.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5560>
If buffer or stride is unaligned we use the same trick as on gfx6:
load 1 byte at a time and recompose the output if needed.
This change fixes lots of deqp/glcts tests:
- dEQP-GLES2.functional.draw.random.1, 10, ...
- dEQP-GLES2.functional.vertex_arrays.multiple_attributes.stride.3_float2_0_float2_0_float2_17, ...
- dEQP-GLES2.functional.vertex_arrays.single_attribute.first.byte_first24_offset1_stride2_quads256, ...
- dEQP-GLES2.functional.vertex_arrays.single_attribute.strides.buffer_0_17_byte2_vec4_dynamic_draw_quads_1, ...
- dEQP-GLES31.functional.draw_indirect.random.14, ...
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5502>
Assume the GFX10.3 ISA is similar to GFX10 which is likely (except
possible minor changes and new instructions for raytracing).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5389>
