Directly converting from a float to an 8 bit integer and from a 64 bit
float to an integer smaller than 32 bit is not supported, therefore add
an intermediate conversion to an 32 bit integer.
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18109>
Conversions to integers must be rounded towards zero, hence, actually
do this for all integers including 8/16 bit sources.
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18109>
Converting signed and unsigned integers from 8/16 bit sources to a 64 bit
floating point destination (i2f64 / u2f64) isn't possible, hence convert
the source to 32 bit first.
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18109>
Add helper functions to check whether a DataType is an unsigned integer
type and whether a DataType is either an unsigned or signed integer
type.
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18109>
Instructions like
mov u16 %r78s 0x00ff (0)
are dropped, since they're not supported by the HW, hence avoid using
8/16 bit destination registers for OP_MOV and use the full width of the
register instead.
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18109>
The 'set' instruction does distinguish between signed and unsigned, but
always treats values as 32 bit. For singed values < 0 with a bit width
smaller than 32 bit this falsely results in treating it as a positive
value.
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18109>
When an OP_UNION def takes part in a vector source e.g. for a tex
instruction we failed to clean up the OP_UNION instruction as rep() points
towards the coalesced value instead.
This fixes a regression on nv50 moving to NIR, but also potentially issues
with nvc0.
The main reason this is common in nv50 is, that we lower OP_SLCT to a set,
predicated movs and a union.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/6406
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/7117
Cc: mesa-stable
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: M Henning <drawoc@darkrefraction.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18377>
Among others, it would result in the spill offsets being wrong due to
being relative to the parent split and not absolute.
For example when computing a 64-bit multiply on Tesla (which only
supports 16-bit mul in hardware), the sources will first be split into
32-bit values and then a second time down to 16-bit ones. Looking at the
first source, the spill offsets ended being computed as follows:
{ .hihi = +2, .hilo = +0, .lohi = +2, .lolo = +0 }
instead of the expected
{ .hihi = +6, .hilo = +4, .lohi = +2, .lolo = +0 }
This is resolved with this patch.
Signed-off-by: Pierre Moreau <dev@pmoreau.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10711>
compMask is expressed in terms of colours, not bytes, where on Tesla we
have 1 colour per 16-bit (whereas it is 1 per 32-bit for later
architectures). By multiplying by units we will get back to a result in
bytes.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Pierre Moreau <dev@pmoreau.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10711>
Mesa as a whole requires C++14 nowadays, so this isn't needed any more.
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17307>
In order to reduce moves when coalescing multiple registers into a
larger register, RA will try to coalesce MERGE instructions with their
definitions. For example, for something like this in GLSL:
uint a = ...;
uint b = ...;
uint64 x = packUint2x32(a, b);
The compiler will try to coalesce x with a and b, in the same way as
something like:
uint a = ...;
uint b = ...;
...
uint x = phi(a, b);
with the crucial difference that the definitions of a and b only clobber
part of the register, instead of the whole thing. This information is
carried through the compound flag and compMask bitmask. If compound is
set, then the value has been coalesced in such a way that not all the
defs clobber the entire register. The compMask bitmask describes which
subregister each def clobbers, although it does it in a slightly
convoluted way. It's an invariant that once compound is set on one def,
it must be set for all the defs in a given coalesced value.
In more detail, the constraints pass will first create extra moves:
uint a = ...;
uint b = ...;
uint a' = a;
uint b' = b;
uint64 x = packUint2x32(a', b');
and then RA will merge values involved in MERGE/SPLIT instructions,
merging x with a' and b' and making the combined value compound -- this
is relatively simple, and will always succeed since we just created a'
and b', so they never interfere with x, and x has no other definitions,
since we haven't started coalescing moves yet. Basically, we just replaced
the MERGE instruction with an equivalent sequence of partial writes to the
destination. The tricky part comes when we try to merge a' with a
and b' with b. We need to transfer the compound information from a' to a
and b' to b, which copyCompound() does, but we also need to transfer it
to any defs coalesced with a and b, which the code failed to do. Similarly,
if x is the argument to a phi instruction, then when we try to merge it
with other arguments to the same phi by coalescing moves, we'd have
problems guaranteeing that all the other merged defs stay up-to-date.
One tricky part of fixing this is that in order to properly propagate
the information from a' to a, we need to do it before the defs for a and
a' are merged in coalesceValues(), since we need to know which defs are
merged with a but not a' -- after coalesceValues() returns, all the defs
have been combined, so we don't know which is which. I took the approach
of calling copyCompound() inside coalesceValues(), instead of
afterwards.
v2: (mhenning) This now loops over mergedDefs in copyCompound, to update
it for changes made in bcf6a9ec
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Karol Herbst <kherbst@redhat.com>
Tested-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: M Henning <drawoc@darkrefraction.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17115>
This is the same flag TGSI sets for LEGACY_MATH_RULES.
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: M Henning <drawoc@darkrefraction.com>
Tested-by: Mobin Aydinfar <mobin@mobintestserver.ir>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16176>
This is a clearer name for what it does than MUL_ZERO_WINS, and matches up
to the new name in shader_info.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16176>
NIR loop unrolling is already enabled so just let it do its job.
Shader-db results (nv120):
total gpr in shared programs: 893490 -> 893898 (0.05%)
gpr in affected programs: 15338 -> 15746 (2.66%)
total instructions in shared programs: 6243205 -> 6237068 (-0.10%)
instructions in affected programs: 71160 -> 65023 (-8.62%)
total bytes in shared programs: 66729616 -> 66664760 (-0.10%)
bytes in affected programs: 759328 -> 694472 (-8.54%)
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16366>
NIR loop unrolling is already enabled so just let it do its job.
Shader-db results (nv92):
total gpr in shared programs: 734638 -> 735037 (0.05%)
gpr in affected programs: 11058 -> 11457 (3.61%)
total instructions in shared programs: 6073415 -> 6073398 (<.01%)
instructions in affected programs: 10079 -> 10062 (-0.17%)
total bytes in shared programs: 41837432 -> 41838872 (<.01%)
bytes in affected programs: 252504 -> 253944 (0.57%)
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16366>
I know pipe defines are still used internally, but I'd want
better testing, before starting to remove that.
Acked-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Yusuf Khan<yusisamerican@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16763>
There wasn't that many, so get rid of them in favour of real types.
Acked-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Yusuf Khan<yusisamerican@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16763>
This allows it to be built independently of the gallium driver.
Acked-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Yusuf Khan<yusisamerican@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16763>
