We already renamed the type, we just need to rename the enum and the
casting helper functions.
Generated with sed:
sed -i -e 's/nir_instr_type_ssa_undef/nir_instr_type_undef/g' src/**/*.h src/**/*.c src/**/*.cpp
sed -i -e 's/nir_instr_as_ssa_undef/nir_instr_as_undef/g' src/**/*.h src/**/*.c src/**/*.cpp
and two tiny whitespace fixups in lima.
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24703>
Instead, we replace it directly with nir_def. We could replace it with
nir_dest but the next commit gets rid of that so this avoids unnecessary
churn. Most of this commit was generated by sed:
sed -i -e 's/dest.dest.ssa/def/g' src/**/*.h src/**/*.c src/**/*.cpp
There were a few manual fixups required in the nir_legacy.c and
nir_from_ssa.c as nir_legacy_reg and nir_parallel_copy_entry both have a
similar pattern.
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24674>
Done by hand at each call site but going very quickly with funny Vim motions and
common regexes. This is a very common idiom in NIR.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23807>
We already skip emitting ftrunc in nir_lower_int_to_float when there is
ffloor, fround or any other integer-making opcode preceding f2i32. However
if lower_ffloor is set for driver that doesn't support integers, the lowered
x - ffract(x) patterns would not be recognized and extra ftruct would be
emitted, doing unnecessary rounding.
This optimization only works if there is no non-trivial swizzling used for
the fadd, fneg and ffract involved, which seems to be 99% of the cases according
to my testing.
This is needed to enable nir ffloor lowering on r300 driver without regressions.
I'm not sure if this helps anybody else, the only hardware which sets
lower_ffloor and converts ints to floats (and can't do trunc) are some old
etnaviv cards, so maybe it will help there a bit.
Signed-off-by: Pavel Ondračka <pavel.ondracka@gmail.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20208>
There are a lot of optimizations in opt_algebraic that match ('ine', a,
0), but there are almost none that match i2b. Instead of adding a huge
pile of additional patterns (including variations that include both ine
and i2b), always lower i2b to a != 0.
At this point in the series, it should be impossible for anything to
generate i2b, so there /should not/ be any changes.
The failing test on d3d12 is a pre-existing bug that is triggered by
this change. I talked to Jesse about it, and, after some analysis, he
suggested just adding it to the list of known failures.
v2: Don't rematerialize i2b instructions in dxil_nir_lower_x2b.
v3: Don't rematerialize i2b instructions in zink_nir_algebraic.py.
v4: Fix zink-on-TGL CI failures by calling nir_opt_algebraic after
nir_lower_doubles makes progress. The latter can generate b2i
instructions, but nir_lower_int64 can't handle them (anymore).
v5: Add back most of the hunk at line 2125 of nir_opt_algebraic.py. I
had accidentally removed the f2b(bf2(x)) optimization.
v6: Just eliminate the i2b instruction.
v7: Remove missed i2b32 in midgard_compile.c. Remove (now unused)
emit_alu_i2orf2_b1 function from sfn_instr_alu.cpp. Previously this
function was still used. 🤷
No shader-db changes on any Intel platform.
All Intel platforms had similar results. (Ice Lake shown)
Instructions in all programs: 141165875 -> 141165873 (-0.0%)
Instructions helped: 2
Cycles in all programs: 9098956382 -> 9098956350 (-0.0%)
Cycles helped: 2
The two Vulkan shaders are helped because of the "new" (('b2i32',
('ine', ('ubfe', a, b, 1), 0)), ('ubfe', a, b, 1)) algebraic pattern.
Acked-by: Jesse Natalie <jenatali@microsoft.com> [earlier version]
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Daniel Schürmann <daniel@schuermann.dev> [earlier version]
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15121>
It's quite likely that the source of the f2i32 was already an integer, in
which case we can skip the ftrunc (particularly useful on the int-to-float
class of hardware that's unlikely to just have a native trunc opcode!).
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15870>
We need to make get it updated after we may have nir_instr_remove()d an
instruction, and when we cross blocks. This didn't really matter before
because the only builder usage was idiv, which other users of
lower_int_to_float were probably never hitting.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11329>
This commit replaces the new_src parameter of nir_ssa_def_rewrite_uses()
with an SSA def, removes nir_ssa_def_rewrite_uses_ssa(), and rewrites
all the users as needed.
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Acked-by: Alyssa Rosenzweig <alyssa@collabora.com>
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9383>
It was always fneu but naming it fne causes confusion from time to time. So
lets rename it. Later we also want to add other unordered and fne, this is
a smaller preparation for that.
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6377>
8e1b75b3 introduced umax/umin in order to lower iand/ior for (n)eq zero.
That breaks the lower_int_to_float pass, because umax and umin weren't
handled there.
Tested with lima. The other users of nir_lower_int_to_float
(etnaviv, freedreno) should also have that issue.
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Andreas Baierl <ichgeh@imkreisrum.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6043>
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Removes the bool_to_float logic from the int_to_float pass, so that both
can be used separately. By having separate passes we have better validation
and it makes it possible to use with the lower_ftrunc option (int lowering
generates ftrunc, but lower_ftrunc generates bools, ftrunc lowering should
probably be reworked). For now we always expect lower_bool to come after
lower_int.
Also fixes f2i32 to become ftrunc and adds u2f/f2u cases.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
It is treated like the vecN instructions which also have no type.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Silence two unused var warnings. And init elem_size, elem_align to
zero to silence "maybe uninitialized" warnings.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
The difference between imov and fmov has been a constant source of
confusion in NIR for years. No one really knows why we have two or when
to use one vs. the other. The real reason is that they do different
things in the presence of source and destination modifiers. However,
without modifiers (which many back-ends don't have), they are identical.
Now that we've reworked nir_lower_to_source_mods to leave one abs/neg
instruction in place rather than replacing them with imov or fmov
instructions, we don't need two different instructions at all anymore.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Rob Clark <robdclark@chromium.org>
This new pass lowers ints and bools to floats. It allows hardware
that doesn't have native integers (e.g. Mali4x0) use the same
code paths as modern hardware.
It uses newly introduced pass to gather SSA types and should be
used as late as possible.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
