I think this is what the code was meant to do, albeit as far as I can tell
the redundant initialization some analyzers complain about should work as
well just fine (only the first layer will be used, if the view contains one
or more layers doesn't really matter).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102467
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: mesa-stable@lists.freedesktop.org
It doesn't seem like the old code could possibly work.
1. brw_gs_state_dirty made us bail unless one of these flags were set:
_NEW_TEXTURE, BRW_NEW_GEOMETRY_PROGRAM, BRW_NEW_TRANSFORM_FEEDBACK
2. If there was no geometry program, we called brw_upload_ff_gs_prog()3
3. That checked brw_ff_gs_state_dirty and bailed unless these were set:
_NEW_LIGHT, BRW_NEW_PRIMITIVE, BRW_NEW_TRANSFORM_FEEDBACK,
BRW_NEW_VS_PROG_DATA.
4. brw_ff_gs_prog_key pv_first and attr fields were set based on data
depending on _NEW_LIGHT and BRW_NEW_VS_PROG_DATA.
This means that if we needed a FF GS program, and changed the VS
outputs or provoking vertex mode, we'd fail to notice that we needed
to emit a new program.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
It is kind of pointless for compute, and avoids issues with apps kicking
off more than 32 compute shaders at once.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
CentOS 6 and RHEL 6 have autoconf 2.63.
Fixes: e4b2b69e82 ("configure: Add and use AX_CHECK_COMPILE_FLAG")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
We can drop the meaningless "64" suffix - libdrm_intel originally had
an "offset" field that was an "unsigned long" which was the wrong size,
and we couldn't remove/alter that field without breaking ABI, so we had
to add a uint64_t "offset64" field.
"gtt_offset" is also more descriptive than "offset".
(Patch originally written by Ken, but Chris suggested a better name and
supplied the giant comment making up the bulk of the patch, so I changed
the authorship to him.)
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
It's used in exactly one place these days, and not much simpler than
just calling intel_batchbuffer_data directly.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
intel_batchbuffer_reset calls add_exec_bo on the batch right away,
which adds in the batch BO size.
Fixes: 29ba502a4e ("i965: Use I915_EXEC_BATCH_FIRST when available.")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Accompanying patch "st/mesa: only try to create 1x msaa surfaces for
'fake' msaa" requires driver to report max_samples=1 to enable "fake"
msaa. Previously, 0 and 1 were treated equivalently in st_init_extensions()
and either could enable "fake" msaa.
This patch raises the swr default msaa_max_count from 0 to 1, so that
swr_is_format_supported will report max_samples=1.
Real msaa can still be enabled by exporting SWR_MSAA_MAX_COUNT with a
pow2 value between 2 and 16.
This patch is necessary to prevent an OpenSWR regression resulting from
the st/mesa patch.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102038
Acked-by: Brian Paul <brianp@vmware.com>
Reviewed-By: George Kyriazis <george.kyriazis@intel.com>
It's fairly simple for now, but this might be quite useful.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
For radv, in order to report VM faults when detected.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This introduces a new separate option because the output can
be quite verbose. If spirv-dis is not found in the path, this
debug option is useless.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
At the moment, debugging radv is not really easy because the
driver doesn't report enough information when it hangs. This
new file will be the main location for all debug tools.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Ported from RadeonSI (original patch by Marek).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
For software drivers where we want "fake" msaa support for GL 3.x, we
treat 1 sample as being msaa.
For drivers with real msaa support, start format probing at 2x msaa.
For drivers with fake msaa support, start format probing at 1x msaa.
This also tweaks the MaxSamples code in st_init_extensions() so that
we use MaxSamples=1 for fake msaa. This allows the format proble loops
to run at least one iteration.
This fixes a llvmpipe/VTK regression from commit 6839d33699.
And for drivers with fake msaa support, calls such as
glTexImage2DMultisample(samples=1) will now succeed.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102038
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102125
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
On using builtin functions we have to move the input to registers $0 and $1, if
one of the input value is an immediate, we fail to propagate the immediate:
...
mov u32 $r477 0x00000003 (0)
...
mov u32 $r0 %r473 (0)
mov u32 $r1 $r477 (0)
call abs BUILTIN:0 (0)
mov u32 %r495 $r1 (0)
...
With this patch the immediate is propagated, potentially causing the first MOV
to be superfluous, which we'd remove in that case:
...
mov u32 $r0 %r473 (0)
mov u32 $r1 0x00000003 (0)
call abs BUILTIN:0 (0)
mov u32 %r495 $r1 (0)
...
Shaderdb stats:
total instructions in shared programs : 4893460 -> 4893324 (-0.00%)
total gprs used in shared programs : 582972 -> 582881 (-0.02%)
total local used in shared programs : 17960 -> 17960 (0.00%)
local gpr inst bytes
helped 0 91 112 112
hurt 0 0 0 0
v2:
implement some changes proposed by imirkin, the manual deletion of the dead
mov is necessary after ea22ac23e0 ("nvc0/ir: unlink values pre- and post-call
to division function") as the potentially dead mov is unlinked properly,
causing later passes to not notice the mov op at all and thus not cleaning it
up. That makes up a big chunk of the regression the above commit caused.
Keep the deletion of the op where it is, deleting it later unnecessarily blows
up size of the change.
Signed-off-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
cs_invocations are currently unsupported, but leaving the field uninitialized
is even worse.
fixes on nvc0:
* KHR-GL45.pipeline_statistics_query_tests_ARB.functional_default_qo_values
* KHR-GL45.pipeline_statistics_query_tests_ARB.functional_non_rendering_commands_do_not_affect_queries
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
Fix loading of a 3x16 vector as a single 48-bit load
on big-endian systems (PPC64, S390).
Roland Scheidegger's commit e827d91756
plus Ray Strode's patch reduce pre-Roland Piglit failures from ~4000 to ~2000. This patch fixes
three of the four regressions observed by Ray:
- draw-vertices
- draw-vertices-half-float
- draw-vertices-half-float_gles2
One regression remains:
- draw-vertices-2101010
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100613
Cc: "17.2" "17.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Ben Crocker <bcrocker@redhat.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
lp_build_fetch_rgba_soa fetches a texel from a texture.
Part of that process involves first gathering the element
together from memory into a packed format, and then breaking
out the individual color channels into separate, parallel
arrays.
The code fails to account for endianess when reading the packed
values.
This commit attempts to correct the problem by reversing the order
the packed values are read on big endian systems.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100613
Cc: "17.2" "17.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Ray Strode <rstrode@redhat.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
This fixes some crashes in the dEQP-VK.memory.requirements.core.* tests.
I'm not sure whether or not passing out-of-bound formats into the query
is supposed to be allowed but there's no harm in protecting ourselves
from it.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Bugzilla: https://bugs.freedesktop.org/101956
Cc: mesa-stable@lists.freedesktop.org
Instead of saving primitive offset in the minmax cache key,
save the actual buffer offset which is used in the cache lookup.
Fixes rendering artifact seen with GoogleEarth when run with
VMware driver.
v2: Per Brian's comment, initialize offset to avoid compiler warning.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Brian Paul <brianp@vmware.com>
error: incompatible pointer to integer conversion initializing 'VkFence'
(aka 'unsigned long long') with an expression of type 'void *' [-Werror,-Wint-conversion]
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
When the kernel supports it set the local flag and
stop adding those BOs to the BO list.
Can probably be optimized much more.
v2: rename new flag to AMDGPU_GEM_CREATE_VM_ALWAYS_VALID
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
For lower overhead in the CS ioctl.
Winsys allocators are not used with interprocess-sharable resources.
v2: It shouldn't crash anymore, but the kernel will reject the new flag.
v3 (christian): Rename the flag, avoid sending those buffers in the BO list.
v4 (christian): Remove setting the kernel flag for now
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Improves performance of GFXBench4 tests at 1024x768 on a Kabylake GT2:
- Manhattan 3.1 by 1.32134% +/- 0.322734% (n=8).
- Car Chase by 1.25607% +/- 0.291262% (n=5).
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
When we blit data into a buffer object, we may need to invalidate any
caches that might contain stale data, so the new data becomes visible.
For example, if the buffer object is bound as a vertex buffer, we need
to invalidate the vertex fetch cache.
While this flushing was missing, it usually happened implicitly for
non-obvious reasons: we're usually on the render ring, and calling
intel_emit_linear_blit() would require switching to the BLT ring,
causing an implicit flush. This likely provoked the kernel to do
PIPE_CONTROLs on our behalf. Although, Gen4-5 wouldn't have this
behavior. At any rate, we should do it ourselves.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Although we're phasing out brw_emit_mi_flush(), we still use it in some
places in order to "flush everything". In a number of those places, we
write data to a buffer that we may then bind as an image surface, SSBO,
or atomic buffer. Those usages require us to flush the data cache.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This exposes the new blorp_copy_buffer() functionality to i965.
It should be a drop-in replacement for intel_emit_linear_blit()
(other than the arguments being backwards, for consistency with BLORP).
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
I want to be able to copy between buffer objects using BLORP in the i965
driver. Anvil already had code to do this, in a reasonably efficient
manner - first using large bpp copies, then smaller bpp copies.
This patch moves that logic into BLORP as blorp_buffer_copy(), so we
can use it in both drivers.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Currently if table_size is 0, it's falling through to:
unreachable("hash table should never be full");
But table_size can be 0 when RADV_DEBUG=nocache is set, or when the
table allocation fails (which is not considered an error).
Fixes: f4e499ec79 "radv: add initial non-conformant radv vulkan driver"
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
