This one's a bit more complex because it filters off only those
variables with mode == nir_var_uniform. As such, it's not exactly a
drop-in replacement for nir_foreach_variable(var, &nir->uniforms).
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5966>
Vulkan allows fragment shaders to read gl_ClipDistance[], in which case
the SPIR-V compiler will inject a compact array variable at
VARYING_SLOT_CLIP_DIST0. Request the lowering to always work in terms
of a compact array variable so we don't have to care about the API
in use.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6022>
We are going to need this in Vulkan because the SPIR-V compiler
defines clip distances as a single compact array of scalars, so
our compiler needs to know what to do with them.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6022>
v3d_compile is now split out into a helper function that gets called a
second time if compilation fails the first time with the result
reporting the register allocation failed. The second time it is run with
the fallback scheduler to try and increase the chances of successfully
allocating the registers.
v2: Add a performance debug message when using the fallback scheduler.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5953>
Instead of just having a bool status for the failure, there is now an
enum so that the compilation can report a more detailed status.
Currently this is only used to report whether the failure was due to
failed register allocation. The “failed” bool doesn’t seem to actually
have been used anywhere so this doesn’t really change a lot.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5953>
The input primitive ID is read from the VPM in the same memory segment
as the outputs. This means that writing the GS header to VPM location 0
needs to be done after reading the primitive ID. This patch adds a
dependency between the load_primitive_id intrinsic and the store_output
intrinsic for location 0 to stop the scheduler from reordering them.
v2: Use an enum for the dependency class number.
v3: Add "GS" to the class enum name.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5953>
nir_schedule already has a struct for options which makes it more than
just a function declaration. Later patches intend to add more structs to
complement these options. In order to make the code easier to manage,
this moves the nir_scheduler-related parts out of nir.h to their own
header.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5953>
This is needed for handling drivers that use an input for loading the
face, for example Panfrost with Midgard GPUs.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Tested-by: Urja Rannikko <urjaman@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5915>
When generating the VPM write instruction for geometry shader outputs,
emit_store_output_gs ends up adding the base and offset arguments
together with an ADD instruction. The addition was done at the VIR level
after scheduling so it always ends up right next to the corresponding
stvpm instruction. Most of the time the offset is constant but nothing
does any constant folding at the VIR level.
This patch makes it instead fold the addition into the offset at the NIR
level in v3d_nir_lower_io so that the NIR-level constant folding can get
rid of the addition most of the time.
v2: Use nir_iadd_imm to simplify the code. (Eric Anholt)
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5825>
ntq_setup_fs_inputs and ntq_setup_gs_inputs sort the inputs according to
the driver location. This input array is then used to calculate the VPM
offset for the outputs in the previous stage. However, it wasn’t taking
into account variables that are packed into a single varying slot. In
that case they would have the same driver_location and are
distinguished by location_frac.
This patch makes it additionally sort by location_frac when the driver
locations are equal. This can happen when the compiler packs varyings
that are sized less than vec4. Without this fix, when the VPM is used to
transmit data free-form between the stages (such as VS->GS) then it
would end up writing to inconsistent locations.
Fixes dEQP tests such as:
dEQP-GLES31.functional.primitive_bounding_box.lines.global_state.
vertex_geometry_fragment.default_framebuffer_bbox_equal
Fixes: 5d578c27ce ("v3d: add initial compiler plumbing for geometry shaders")
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5787>
When line smoothing is enabled, the driver now increases the width of
the line so that it can add some semi-transparent pixels to either side
of the line. A lowering pass is added which modifies the alpha component
of every write to fragment output 0 so that if the fragment is outside
the width of the line then the alpha is reduced. It additionally
discards fragments that are completely invisible. It might seem bad to
use discard on a tiled renderer but the assumption is that any bad
effects from using discard will also happen anyway because of enabling
alpha blending.
v2: Disable the line smoothing pass entirely when the framebuffer
contains an integer colour output or one with no alpha channel.
Calculate the coverage once upfront and store in a global variable
instead of calculating each time an output write is modified. Also
do the conditional discard once upfront.
v3: Don’t check whether the output buffer has an alpha channel. Only
look at output 0. Use aa_line_width intrinsic instead of calculating
the real line width in the shader. Clamp the coverage as part of the
global variable, not per output write.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5624>
When fetching for cube maps, we need to interpret them as 2d texture
arrays, being the third coordinate the index for the face.
Fixes Vulkan CTS tests like the following using v3dv:
dEQP-VK.binding_model.shader_access.primary_cmd_buf.storage_image.fragment.single_descriptor.cube_base_mip
dEQP-VK.binding_model.shader_access.primary_cmd_buf.storage_image.compute.multiple_descriptor_sets.multiple_contiguous_descriptors.cube_array_base_mip
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5675>
So it could be used by both the OpenGL and the Vulkan driver.
In addition to the move, some small changes were needed to be made on
the API. For example, the simulator was receiving v3d_screen on
initialization, and that code setted v3d_screen->sim_file. Now it
returns the new sim_file created.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5666>
This was assuming that unused temporaries are written but never read,
since the NOP register can only be used as a destination register,
but we can end up here also for temporaries that are read once but
never written.
This was found with a graphicsfuzz test that has a switch with
cases that have unreachable discards. In that test, NIR genrates
code like this:
decl_reg vec3 32 r19
...
r20 = mov r19.z
r21 = mov r19.y
r22 = mov r19.x
Where r19.xyz would generate 3 temporary registers that are read but
never written, so we would rewrite them to point to the NOP register
as QPU instruction sources, which is not allowed and would hit an
assert that expect magic reads to be from [r0,r5] only.
Fixes:
dEQP-VK.graphicsfuzz.unreachable-switch-case-with-discards
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5645>
The offset for the VPM write for storing outputs from the geometry
shader isn’t necessarily uniform across all the lanes. This can happen
if some of the lanes don’t emit some of the vertices. In that case the
offset for the subsequent vertices will be different in each lane. In
that case we need to use the stvpmd instruction instead of stvpmv
because it will scatter the values out.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/3150
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5621>
Unlike the vertex shaders, the memory for inputs and outputs is stored
in separate segments so the scheduler doesn’t need to serialise them.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5561>
The scheduler has code to handle hardware that shares the same memory
for inputs and outputs. Seeing as the specific stages that need this is
probably hardware-dependent, this patch makes it a configurable option
instead of hard-coding it to everything but fragment shaders.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5561>
It looks like gs_input_sizes was added when GS shaders were implemented
but it was never used anywhere.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5561>
This allows us to do API specific checks before removing variable
without filling nir_remove_dead_variables() with API specific code.
In the following patches we will use this to support the removal
of dead uniforms in GLSL.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4797>
This uses a meson builtin to handle -fvisibility=hidden. This is nice
because we don't need to track which languages are used, if C++ is
suddenly added meson just does the right thing.
Acked-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4740>
TMUSLOD register is the same that TMUS but having the same effect that
setting disable_autolod on the TMU configuration parameter 2.
So using that register is potentially more efficient, as in several
cases we would be able to skip writing P2.
One case where we can't use it is for texture cube maps, as we need to
use TMUSCM.
v2: don't put a comment in the middle of the conditions (Iago)
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4962>
Texture access has three configuration parameters, P0 (texture), P1
(sampler) and P2(lookup). P1 and P2 are optional, but if P2 is needed
(like for example to set the offset for texelFetchOffset), then you
need to set P1.
But until now when setting up P1 we were asking the driver to fill up
the address with the shader state. But in that case we can just fill
that address with the default value NULL.
So let's avoid asking the driver to fill that default values, and do
it directly on the compiler. This is a good-to-have on OpenGL, and
likely would be needed on Vulkan.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4962>
Commit 1bc71e8b65 already did that for
the 3rd offset, but it also needs to do it for the 2nd (to handle 1d
array).
Fixes assertion failures with Vulkan CTS tests using 1darray
targets. Seems that there isn't too many 1darray tests on OpenGL CTS,
and OpenGL-ES don't support 1d arrays, but the same problem could
arise eventually on OpenGL.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4962>
When I was writing drm-shim, I was focused on the v3d kmsro case -- use my
intel device as the kmsro display device and add on a simulator-based v3d
device that we could render with. But for the noop backends we use for
shader-db, it's a lot more useful to just overwrite the first render node
in the system so that you don't have to pass a -d <how many render nodes I
already have in my system> argument.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4664>
Fixes all the ARB_texture_query_lod piglit tests, and needed to get
the Vulkan CTS textureQueryLOD passing with the ongoing Vulkan driver.
Note that LOD Query bit flag became only available on V42 of the hw,
but the v3d40_tex is using V41 as reference. In order to avoid setting
up the infrastructure to support both v41 and v42, we manually set the
bit if the device version is the correct one.
We also fix how the ARB_texture_query_lod (so EXT_texture_query_lod)
is exposed. Before this commit it was always exposed (wrongly as it
was not really supported). Now it is exposed for devinfo.ver >= 42.
v2: move _need_sampler helper to nir.h (Eric Anholt)
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4677>
Configuration Parameter packets 1 and 2 are pointed as optional, but
it is not clearly stated if you can skip only P1 when P2 is needed.
In the practice, it seems that the situation P0 - non-P1 - P2 can
causes problems, and at least on the simulator, it seems that sampler
info are attempted to be accessed. So let's just be conservative, and
only skip P1 configuration if we can skip P2 configuration too.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4677>
TMU configuration parameter 1 configures the sampler for the texture
operation. But there are some texture operations that doesn't need a
sampler. Skipping the configuration could provide a small perf
improvement on OpenGL. On the incoming Vulkan driver, would allow us
to avoid to set up an unneeded sampler.
Note that we still need to add the sampler configuration parameter if
the output is a 32bit, as it is on the sampler where we configure that
info.
Also, note that for images this is done comparing against a unpacked
p1 default. But in order to do that it is needed to go through the
code that fills up the unpacked p1. We can skip that too.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4677>
Let's make it clear what includes are being added everywhere, so that
they can be cleaned up.
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4360>
Add a parameter so the callback can know which node it is selecting a
register for. And remove the graph parameter, as it is unused by
existing users, and somewhat unnecessary (ie. the callback data could
be used instead).
And add a comment so $future_me remembers how this works.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4071>
This saves a bunch of hassle in handling derefs in the backend, and would
be needed for reasonable handling of dynamic indexing of image arrays.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3728>
This means you can directly use format utils on it without having to have
your own GL enum to number-of-components switch statement (or whatever) in
your vulkan backend.
Thanks to imirkin for fixing up the nouveau driver (and a couple of core
details).
This fixes the computed qualifiers for EXT_shader_image_load_store's
non-integer sizeNxM qualifiers, which we don't have tests for.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> (v3d)
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3355>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3355>
This is a more explicit name now that we don't want it to be doing any
memory barrier stuff for us.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3307>
Right now, it's implemented as a no-op for everyone. For most drivers,
it's a switch case in the NIR -> whatever which just breaks. For ir3,
they already have code to delete tessellation barriers so we just add a
case to also delete memory_barrier_tcs_patch.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3307>
When geometry shaders write a value to gl_Layer that doesn't correspond to
an existing layer in the target framebuffer the rendering behavior is
undefined according to the spec, however, there are CTS tests that trigger
this scenario on purpose, probably to ensure that nothing terrible happens.
For V3D, this situation is problematic because the binner uses the layer
index to select the offset to write into the tile state data, and we only
allocate tile state for MAX2(num_layers, 1), so we want to make sure we
don't produce values that would lead to out of bounds writes. The simulator
has an assert to catch this, although we haven't observed issues in actual
hardware it is probably best to play safe.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
