All of the affected shaders are in Mad Max. I noticed this while
looking at some other things. I tried a couple similar patterns, but
the affect on cycles was general negative. It may be worth revisiting
this later.
v2: Rebase on 1-bit Boolean changes.
All Gen7+ platforms had similar results. (Skylake shown)
total instructions in shared programs: 15282073 -> 15282053 (<.01%)
instructions in affected programs: 1192 -> 1172 (-1.68%)
helped: 14
HURT: 0
helped stats (abs) min: 1 max: 2 x̄: 1.43 x̃: 1
helped stats (rel) min: 1.16% max: 2.17% x̄: 1.65% x̃: 1.39%
95% mean confidence interval for instructions value: -1.73 -1.13
95% mean confidence interval for instructions %-change: -1.91% -1.38%
Instructions are helped.
total cycles in shared programs: 372595954 -> 372594532 (<.01%)
cycles in affected programs: 11477 -> 10055 (-12.39%)
helped: 14
HURT: 0
helped stats (abs) min: 76 max: 122 x̄: 101.57 x̃: 104
helped stats (rel) min: 7.76% max: 15.62% x̄: 12.94% x̃: 14.78%
95% mean confidence interval for cycles value: -111.05 -92.09
95% mean confidence interval for cycles %-change: -14.90% -10.98%
Cycles are helped.
No changes on any Gen6 or earlier platforms.
Reviewed-by: Matt Turner <mattst88@gmail.com>
All of the affected shaders are in Mad Max. The inner part of the
pattern is itself an open-coded sign(a). I tried using that as a
pattern, but the results were not good. A bunch of shaders were helped
for instructions, but overall cycles, spill, and fills were hurt.
v2: Rebase on 1-bit Boolean changes.
v3: Fix order of copysign() parameters in comments and commit message.
Noticed by Matt.
All Gen7+ platforms had similar results. (Skylake shown)
total instructions in shared programs: 15282141 -> 15282073 (<.01%)
instructions in affected programs: 6106 -> 6038 (-1.11%)
helped: 17
HURT: 0
helped stats (abs) min: 4 max: 4 x̄: 4.00 x̃: 4
helped stats (rel) min: 1.02% max: 2.20% x̄: 1.15% x̃: 1.06%
95% mean confidence interval for instructions value: -4.00 -4.00
95% mean confidence interval for instructions %-change: -1.30% -1.00%
Instructions are helped.
total cycles in shared programs: 372597886 -> 372595954 (<.01%)
cycles in affected programs: 32701 -> 30769 (-5.91%)
helped: 17
HURT: 0
helped stats (abs) min: 6 max: 216 x̄: 113.65 x̃: 118
helped stats (rel) min: 0.40% max: 21.86% x̄: 6.20% x̃: 5.83%
95% mean confidence interval for cycles value: -152.84 -74.45
95% mean confidence interval for cycles %-change: -8.89% -3.51%
Cycles are helped.
No changes on any Gen6 or earlier platforms.
Reviewed-by: Matt Turner <mattst88@gmail.com>
In compute shaders if no derivative group is defined, the derivatives
will always be zero. Specified in NV_compute_shader_derivatives.
To make the check more convenient, add a "info" local variable to the
generated code so we can refer to it in the Python rules. (Jason)
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The new OR pattern has been seen in the wild and can end up being
generated by GLSLang. Not sure about the other two new patterns but we
may as well throw them in for completeness. While we're here, we can
drop the '@bool' specifier from the one pattern because specifying True
already implies 1-bit which basically implies boolean.
Shader-db results on Kaby Lake:
total instructions in shared programs: 15321227 -> 15321129 (<.01%)
instructions in affected programs: 3594 -> 3496 (-2.73%)
helped: 6
HURT: 0
total cycles in shared programs: 357481321 -> 357479725 (<.01%)
cycles in affected programs: 44109 -> 42513 (-3.62%)
helped: 6
HURT: 0
VkPipeline-DB results on Kaby Lake:
total instructions in shared programs: 3770504 -> 3769734 (-0.02%)
instructions in affected programs: 19058 -> 18288 (-4.04%)
helped: 163
HURT: 0
total cycles in shared programs: 1417583701 -> 1417569727 (<.01%)
cycles in affected programs: 750958 -> 736984 (-1.86%)
helped: 158
HURT: 1
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Now that we have one-bit booleans, we don't need to rely on looking at
parent instructions in order to figure out if a value is a Boolean most
of the time. We can drop these specifiers and now the optimizations
will apply more generally.
Shader-DB results on Kaby Lake:
total instructions in shared programs: 15321168 -> 15321227 (<.01%)
instructions in affected programs: 8836 -> 8895 (0.67%)
helped: 1
HURT: 31
total cycles in shared programs: 357481781 -> 357481321 (<.01%)
cycles in affected programs: 146524 -> 146064 (-0.31%)
helped: 22
HURT: 10
total spills in shared programs: 23675 -> 23673 (<.01%)
spills in affected programs: 11 -> 9 (-18.18%)
helped: 1
HURT: 0
total fills in shared programs: 32040 -> 32036 (-0.01%)
fills in affected programs: 27 -> 23 (-14.81%)
helped: 1
HURT: 0
No change in VkPipeline-DB
Looking at the instructions hurt, a bunch of them seem to be a case
where doing exactly the right thing in NIR ends up doing the wrong-ish
thing in the back-end because flags are dumb. In particular, there's a
case where we have a MUL followed by a CMP followed by a SEL and when we
turn that SEL into an OR, it uses the GRF result of the CMP rather than
the flag result so the CMP can't be merged with the MUL. Those shaders
appear to schedule better according to the cycle estimates so I guess
it's a win? Also it helps spilling in one Car Chase compute shader.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
No shader-db changes on any Intel platform.
v2: Use a loop to generate patterns. Suggested by Jason.
v3: Fix a copy-and-paste bug in the extract_[ui] of ishl loop that would
replace an extract_i8 with and extract_u8. This broke ~180 tests. This
bug was introduced in v2.
Reviewed-by: Matt Turner <mattst88@gmail.com> [v1]
Reviewed-by: Dylan Baker <dylan@pnwbakers.com> [v2]
Acked-by: Jason Ekstrand <jason@jlekstrand.net> [v2]
No shader-db changes on any Intel platform.
v2: Use a loop to generate patterns. Suggested by Jason.
v3: Fix a copy-and-paste bug in the extract_[ui] of ishl loop that would
replace an extract_i8 with and extract_u8. This broke ~180 tests. This
bug was introduced in v2.
Reviewed-by: Matt Turner <mattst88@gmail.com> [v1]
Reviewed-by: Dylan Baker <dylan@pnwbakers.com> [v2]
Acked-by: Jason Ekstrand <jason@jlekstrand.net> [v2]
No shader-db changes on any Intel platform.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
v2 (Topi):
- Make bit-size handling order be 16-bit, 32-bit, 64-bit
- Clamp lower exponent range at -28 instead of -30.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Shader-db results on Kaby Lake:
total instructions in shared programs: 15225213 -> 15222365 (-0.02%)
instructions in affected programs: 43524 -> 40676 (-6.54%)
helped: 203
HURT: 0
Lots of shaders in Shadow Warrior had this pattern along with Deus Ex,
Civ, Shadow of Mordor, and several others.
Reviewed-by: Kristian H. Kristensen <hoegsberg@chromium.org>
This broke piles of image load store tests (179 failures on CI,
mesa_master build #15546, previous build right before this landed
was green). I'd rather not leave the tree on fire over the weekend,
so let's revert for now, and we can figure out what happened next week.
No shader-db changes on any Intel platform.
v2: Use a loop to generate patterns. Suggested by Jason.
Reviewed-by: Matt Turner <mattst88@gmail.com> [v1]
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
No shader-db changes on any Intel platform.
v2: Use a loop to generate patterns. Suggested by Jason.
Reviewed-by: Matt Turner <mattst88@gmail.com> [v1]
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
No shader-db changes on any Intel platform.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Not complete, mostly just adding things as I encounter them in CTS. But
not getting far enough yet to hit most of the OpenCL.std instructions.
Anyway, this is better than nothing and covers the most common builtins.
v2: add hadd proof from Jason
move some of the lowering into opt_algebraic and create new nir opcodes
simplify nextafter lowering
fix normalize lowering for inf
rework upsample to use nir_pack_bits
add missing files to build systems
v3: split lines of iadd/sub_sat expressions
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Optimize a situation where we only need lower 32 bits from 64 bit
result.
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Suggested-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
On Gen 8 and 9, "mul" instruction supports 64 bit destination type. We
can reduce our 64x64 int multiplication from 4 instructions to 3.
Also instead of emitting two mul instructions, we can emit single mul
instuction and extract low/high 32 bits from 64 bit result for
[i/u]mulExtended
v2: 1) Allow lower_mul_high64 to use new opcode (Jason Ekstrand)
2) Add lower_mul_2x32_64 flag (Matt Turner)
3) Remove associative property as bit size is different (Connor
Abbott)
v3: Fix indentation and variable naming convention (Jason Ekstrand)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
I noticed this while looking at a shader that was affected by Tim's
"more loop unrolling" series.
In review, Tim Arceri asked:
> Why the hurt on Gen6+ is this something that should be in the late
> optimisations pass?
As far as I can tell, it's just because our scheduler is terrible. In
all the fragment shaders that I looked at (some hurt shaders were from
other stages), only one of the SIMD8 or SIMD16 version would be hurt.
In many of those case, the other SIMD width is improved (e.g.,
shaders/closed/steam/brutal-legend/3990.shader_test).
Often it looks like the scheduler decides to differently schedule a SEND
the occurs somewhere early in the shader. Once that happens, everything
is different.
I looked at one vertex shader that was hurt (from Goat Simulator). In
that case, both the floor and fract are used. The optimization
eliminates the add, and it should allow better scheduling. In the area
of the FRC and RNDD instructions, the scheduler does the right thing.
However, later in the shader a MAD and and ADD get scheduled
differently, and that makes it slightly worse.
In light of this, I tried adding some "is_used_once" mark-up, and that
did not fix all the cycles regressions. It also did a lot more harm
than good on SKL (helped 82 vs. hurt 241).
All Gen6+ platforms had similar results. (Skylake shown)
total instructions in shared programs: 15437001 -> 15435259 (-0.01%)
instructions in affected programs: 213651 -> 211909 (-0.82%)
helped: 988
HURT: 0
helped stats (abs) min: 1 max: 27 x̄: 1.76 x̃: 1
helped stats (rel) min: 0.15% max: 11.54% x̄: 1.14% x̃: 0.59%
95% mean confidence interval for instructions value: -1.89 -1.63
95% mean confidence interval for instructions %-change: -1.23% -1.05%
Instructions are helped.
total cycles in shared programs: 383007378 -> 382997063 (<.01%)
cycles in affected programs: 1650825 -> 1640510 (-0.62%)
helped: 679
HURT: 302
helped stats (abs) min: 1 max: 348 x̄: 23.39 x̃: 14
helped stats (rel) min: 0.04% max: 28.77% x̄: 1.61% x̃: 0.98%
HURT stats (abs) min: 1 max: 250 x̄: 18.43 x̃: 7
HURT stats (rel) min: 0.04% max: 25.86% x̄: 1.41% x̃: 0.53%
95% mean confidence interval for cycles value: -13.05 -7.98
95% mean confidence interval for cycles %-change: -0.86% -0.50%
Cycles are helped.
Iron Lake and GM45 had similar results. (GM45 shown)
total instructions in shared programs: 5043616 -> 5043010 (-0.01%)
instructions in affected programs: 119691 -> 119085 (-0.51%)
helped: 432
HURT: 0
helped stats (abs) min: 1 max: 27 x̄: 1.40 x̃: 1
helped stats (rel) min: 0.10% max: 8.11% x̄: 0.66% x̃: 0.39%
95% mean confidence interval for instructions value: -1.58 -1.23
95% mean confidence interval for instructions %-change: -0.72% -0.59%
Instructions are helped.
total cycles in shared programs: 128139812 -> 128135762 (<.01%)
cycles in affected programs: 3829724 -> 3825674 (-0.11%)
helped: 602
HURT: 0
helped stats (abs) min: 2 max: 486 x̄: 6.73 x̃: 6
helped stats (rel) min: 0.02% max: 4.85% x̄: 0.19% x̃: 0.10%
95% mean confidence interval for cycles value: -8.40 -5.05
95% mean confidence interval for cycles %-change: -0.22% -0.16%
Cycles are helped.
Reviewed-by: Elie Tournier <tournier.elie@gmail.com>
I have not investigated the result of doing this during code
generation. That should be possible, but it would be a bit more
effort.
All Gen6+ platforms had nearly identical results. (Skylake shown)
total cycles in shared programs: 370961508 -> 370961367 (<.01%)
cycles in affected programs: 5174 -> 5033 (-2.73%)
helped: 2
HURT: 0
Iron Lake and GM45 had similar results. (Iron Lake shown)
total instructions in shared programs: 8206587 -> 8206589 (<.01%)
instructions in affected programs: 1325 -> 1327 (0.15%)
helped: 0
HURT: 2
total cycles in shared programs: 187657422 -> 187657428 (<.01%)
cycles in affected programs: 11566 -> 11572 (0.05%)
helped: 0
HURT: 2
This change has almost no effect right now. However, removing this
patch (but leaving the patch "intel/fs: Generate if instructions with
inverted conditions") after adding a patch that removes !(a < b) -> (a
>= b) optimizations (like
https://patchwork.freedesktop.org/patch/264787/) has the following
results on Skylake:
Skylake
total instructions in shared programs: 15071804 -> 15071806 (<.01%)
instructions in affected programs: 640 -> 642 (0.31%)
helped: 0
HURT: 2
total cycles in shared programs: 369914348 -> 369916569 (<.01%)
cycles in affected programs: 27900 -> 30121 (7.96%)
helped: 4
HURT: 15
helped stats (abs) min: 2 max: 112 x̄: 30.00 x̃: 3
helped stats (rel) min: 0.28% max: 12.28% x̄: 3.34% x̃: 0.40%
HURT stats (abs) min: 2 max: 758 x̄: 156.07 x̃: 81
HURT stats (rel) min: 0.20% max: 74.30% x̄: 16.29% x̃: 16.91%
95% mean confidence interval for cycles value: 12.68 221.11
95% mean confidence interval for cycles %-change: 3.09% 21.23%
Cycles are HURT.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This is a common pattern from HLSL->SPIRV translation
and supported in HW by all current NIR backends.
vkpipeline-db results anv (SKL):
total instructions in shared programs: 6403130 -> 6402380 (-0.01%)
instructions in affected programs: 204084 -> 203334 (-0.37%)
helped: 208
HURT: 0
total cycles in shared programs: 1915629582 -> 1918198408 (0.13%)
cycles in affected programs: 1158892682 -> 1161461508 (0.22%)
helped: 107
HURT: 86
shader-db results on i965 (KBL):
total instructions in shared programs: 15284592 -> 15284568 (<.01%)
instructions in affected programs: 81683 -> 81659 (-0.03%)
helped: 24
HURT: 0
total cycles in shared programs: 375013622 -> 375013932 (<.01%)
cycles in affected programs: 40169618 -> 40169928 (<.01%)
helped: 13
HURT: 9
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The idea here is to reassociate a * (b * c) into (a * c) * b, when
b is a non-constant value, but a and c are constants, allowing them
to be combined.
But nothing was enforcing that 'b' must be non-constant, which meant
that running opt_algebraic in a loop would never terminate if the IR
contained non-folded constant expressions like 256 * 0.5 * 2. Normally,
we call constant folding in such a loop too, but IMO it's better for
nir_opt_algebraic to be robust and not rely on that.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109581
Fixes: 32e266a9a5 i965: Compile fp64 funcs only if we do not have 64-bit hardware support
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The quotation marks around 1.0 cause it to be treated as a string
instead of a floating point value. The generator then treats it as an
arbitrary variable replacement, so any iand involving a ('ineg', ('b2i',
a)) matches.
v2: Remove misleading comment about sized literals (suggested by
Timothy). Add assertion that the name of a varible is entierly
alphabetic (suggested by Jason).
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: Timothy Arceri <tarceri@itsqueeze.com> [v1]
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com> [v1]
Fixes: 6bcd2af086 ("nir/algebraic: Add some optimizations for D3D-style Booleans")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109075
D3D Booleans use a 32-bit 0/-1 representation. Because this previously
matched NIR exactly, we didn't have to really optimize for it. Now that
we have 1-bit Booleans, we need some specific optimizations to chew
through the D3D12-style Booleans.
Shader-db results on Kaby Lake:
total instructions in shared programs: 15136811 -> 14967944 (-1.12%)
instructions in affected programs: 2457021 -> 2288154 (-6.87%)
helped: 8318
HURT: 10
total cycles in shared programs: 373544524 -> 359701825 (-3.71%)
cycles in affected programs: 151029683 -> 137186984 (-9.17%)
helped: 7749
HURT: 682
total loops in shared programs: 4431 -> 4399 (-0.72%)
loops in affected programs: 32 -> 0
helped: 21
HURT: 0
total spills in shared programs: 10290 -> 10051 (-2.32%)
spills in affected programs: 2532 -> 2293 (-9.44%)
helped: 18
HURT: 18
total fills in shared programs: 22203 -> 21732 (-2.12%)
fills in affected programs: 3319 -> 2848 (-14.19%)
helped: 18
HURT: 18
Note that a large chunk of the improvement fixing regressions caused by
switching to 1-bit Booleans. Previously, our ability to optimize D3D
booleans was improved by using the D3D representation directly in NIR.
Now that NIR does 1-bit bools, we need a few more optimizations.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This just makes it nicely scale across bit sizes.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Later in this series, bool is not going to imply 32-bit.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This was originally added for the out-of-tree Mali driver but I think
we've all agreed it's easy enough for them to just do in their back-end.
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Shader-db results on Kaby Lake:
total instructions in shared programs: 15072525 -> 15072525 (0.00%)
instructions in affected programs: 0 -> 0
helped: 0
HURT: 0
This helps prevent regressions in later commits.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Instead of a single i2b and b2i, we now have i2b32 and b2iN where N is
one if 8, 16, 32, or 64. This leads to having a few more opcodes but
now everything is consistent and booleans aren't a weird special case
anymore.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Suffixes are dropped from a bunch of conversion opcodes when it makes
sense to do so. Others are kept if we really do want the bit-size
restriction.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
lowers ceil(x) as -floor(-x)
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The b2f and b2i conversions always produce zero or one which are both
representable in every type and size. Since b2i and b2f support all bit
sizes, we can just get rid of the conversion opcode.
total instructions in shared programs: 15089335 -> 15084368 (-0.03%)
instructions in affected programs: 212564 -> 207597 (-2.34%)
helped: 896
HURT: 0
total cycles in shared programs: 369831123 -> 369826267 (<.01%)
cycles in affected programs: 2008647 -> 2003791 (-0.24%)
helped: 693
HURT: 216
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
These allows us to not support fsign.sat in the Intel compiler backend,
and that will simplify some later changes.
No shader-db changes on any Intel platform.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Thomas Helland <thomashelland90@gmail.com>
Found by inspection. This doesn't help much now but we'll see this
pattern with images if you load UNORM and then store UNORM.
Shader-db results on Kaby Lake:
total instructions in shared programs: 15166916 -> 15166910 (<.01%)
instructions in affected programs: 761 -> 755 (-0.79%)
helped: 6
HURT: 0
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
